Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Tipe] Power filter
[Spesifikasi] •Diameter dalam: Φ40 Body base: TMR40-36. Pitch karburator: Single Body Diameter luar spigot (mm): 45mm •Panjang keseluruhan spigot (mm): 30mm
[Termasuk] Manifold
[Part terpisah yang diperlukan] Set oil catch tank universal Secondary air blind cap (untuk 01-) [Type] Power filter
[Specification] ・Inner diameter: Φ40 Base body:TMR40-36. Carburetor pitch:Single Body Spigot outer diameter (mm):45mm ・Spigot total length(mm):30mm
[Included parts] Manifold
[Parts required separately] Universal Oil Catch Tank Set Secondary air blind cap (for 01-)
Catatan
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
[Komponen terpisah yang diperlukan saat pemasangan] Salah satu dari dudukan throttle berikut. Yoshimura Racing Throttle Holder Set untuk TMR body besar (L=850mm) *Yoshimura Racing Throttle Holder Set untuk TMR body kecil dengan switch (L=850mm) (Coupler kabel switch perlu diganti)
[Produk yang dijual terpisah] •Yoshimura Oil Breather Tank Kit *Komponen yang diperlukan secara terpisah sudah dikonfirmasi kebutuhannya oleh YOSHIMURA Japan saat proses pengembangan produk. *Jika produk sudah discontinue, gunakan produk sparepart asli motor. *Panjang kabel gas standar. Mungkin akan berbeda karena metode pemasangan. *Filter yang termasuk dibuat dari Aluminium CNC. *Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*Either of the following throttle holder sets is required as a separate part for installation. *Yoshimura Racing Throttle Holder Set for TMR Large Body (L=850mm) ・Yoshimura Racing Throttle Holder Set for TMR Small Body with Switch (L=850mm) (Switch side coupler wiring required to be changed) *Parts required separately:YOSHIMIURA Oil Breather Tank Kit. *Required parts are the parts that YOSHIMIURA Japan confirmed the installation during the development. *Please prepare the appropriate parts if stock parts have been discontinued. *The length of the throttle wire is the standard setting.Please note that it may vary depending on the installation method. *The filter adapter included with this product is a machined aluminum product. *There may be changes in product specifications due to the manufacturer's reasons.
