- Beranda
- Motor
- HONDA 1001cc -
- Rebel 1100
- Sparepart Motor
- Sparepart Stang & Kemudi
- Sistem Kendali
- Dudukan / Klem Stang
- r's gear
- r's gear: Klem Riser Stang
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Bahan: Duralumin, proses anodisasi hitam dengan emblem cloisonne
Spesifikasi: 40mm mundur, 15mm naik
*Dapat langsung dipasang tanpa mengganti kabel dan selang. Material / Specifications: Duralumin, black anodized with cloisonne emblem
Specs: 40mm back, 15mm up
*Bolt-on installation is possible without replacing harnesses and hoses.
Spesifikasi: 40mm mundur, 15mm naik
*Dapat langsung dipasang tanpa mengganti kabel dan selang. Material / Specifications: Duralumin, black anodized with cloisonne emblem
Specs: 40mm back, 15mm up
*Bolt-on installation is possible without replacing harnesses and hoses.
[Deskripsi]
Klem Riser Stang ini digunakan dengan mengapitnya di antara stang motor.
Posisi pegangan adalah 40mm mundur dan 15mm naik dibandingkan dengan biasanya.
Terbuat dari duralumin CNC, finishing anodisasi dengan emblem cloisonne .
It is a handle set back riser that is used by putting it between normal handle posts.
The handle position is 40mm back and 15mm up compared to the normal.
Made of machined duralumin, anodized finishing with cloisonne emblem.
Posisi pegangan adalah 40mm mundur dan 15mm naik dibandingkan dengan biasanya.
Terbuat dari duralumin CNC, finishing anodisasi dengan emblem cloisonne .
It is a handle set back riser that is used by putting it between normal handle posts.
The handle position is 40mm back and 15mm up compared to the normal.
Made of machined duralumin, anodized finishing with cloisonne emblem.
Peringatan
*Tidak bisa dipasang langsung tanpa mengganti selang dan pengkabelan.
*Harap diperhatikan bahwa spesifikasi produk sewaktu-waktu dapat berubah tanpa pemberitahuan sebelumnya oleh produsen. *It can be installed by bolt-on without replacing the harness and hoses.
*For REBEL1100 (MT), it is necessary to change the clutch wire routing.
*In case of installing REBEL 250 / 500 HONDA stock option or meter visor, the optional bracket for REBEL 250 / 500 meter visor (sold separately) is required.
*There may be changes in product specifications due to the manufacturer's reasons.
*Harap diperhatikan bahwa spesifikasi produk sewaktu-waktu dapat berubah tanpa pemberitahuan sebelumnya oleh produsen. *It can be installed by bolt-on without replacing the harness and hoses.
*For REBEL1100 (MT), it is necessary to change the clutch wire routing.
*In case of installing REBEL 250 / 500 HONDA stock option or meter visor, the optional bracket for REBEL 250 / 500 meter visor (sold separately) is required.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/