- Beranda
- Motor
- KAWASAKI 126 - 250cc
- ZX-25R
- Aksesoris
- Kelistrikan
- Multi-Bar Mounting Bar
- ENDURANCE
- ENDURANCE: Multi Bar
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Bahan] Besi (Lapisan deposisi elektro) Bagian collar menggunakan bahan aluminium
[Ukuran] Panjang bar: kurang lebih 80mm
Sepasang (untuk Kiri dan Kanan)
Waktu Pemasangan 5-15 menit
[Material] Iron (Electro deposition coating) Collar attached is Aluminum
[Size] Length of the bar: 80mm (approx.)
Pair (for Left and Right)
Installation Time 0.1h : 0.2h
[Ukuran] Panjang bar: kurang lebih 80mm
Sepasang (untuk Kiri dan Kanan)
Waktu Pemasangan 5-15 menit
[Material] Iron (Electro deposition coating) Collar attached is Aluminum
[Size] Length of the bar: 80mm (approx.)
Pair (for Left and Right)
Installation Time 0.1h : 0.2h
[Deskripsi]
Cukup pasangkan dengan dudukan handle kopling OEM untuk pemasangan secara bolt-on.
Diameter luarnya adalah Φ22,2, sama dengan pipa stang pada umumnya, sehingga Anda dapat memasang dudukan navigasi atau smartphone yang dapat dipasang pada pipa stang.
Multi bar ini dicat dengan pengecatan elektro-deposisi yang tahan terhadap goresan dan karat.
Simply tighten with the OEM clutch lever holder mounting for a bolt on installation.
The outer diameter of the bar is Φ22.2, which is the same diameter as the general handlebar oipe, so you can install a navigation holder or smartphone holder that can be installed on the handlebar pipe.
Multi bar is painted by electro-deposition painting which is resistant to wound and rust.
Diameter luarnya adalah Φ22,2, sama dengan pipa stang pada umumnya, sehingga Anda dapat memasang dudukan navigasi atau smartphone yang dapat dipasang pada pipa stang.
Multi bar ini dicat dengan pengecatan elektro-deposisi yang tahan terhadap goresan dan karat.
Simply tighten with the OEM clutch lever holder mounting for a bolt on installation.
The outer diameter of the bar is Φ22.2, which is the same diameter as the general handlebar oipe, so you can install a navigation holder or smartphone holder that can be installed on the handlebar pipe.
Multi bar is painted by electro-deposition painting which is resistant to wound and rust.
Peringatan
*Jika segitiga atas atau stang tidak asli, maka tidak dapat dipasang.
Pastikan pemasangan dilakukan oleh mekanik berpengalaman yang memiliki pengetahuan umum dan keterampilan perawatan motor serta memiliki peralatan yang diperlukan.
*Jika motor Anda tidak ada di dalam daftar, berarti tidak bisa dipasang, atau tidak dapat dikonfirmasi.
Kami tidak dapat mengonfirmasi pemasangan pada model motor selain yang tercantum.
*Kami tidak menjamin kesesuaian produk untuk pemasangan pada motor yang tidak ada dalam daftar model motor yang sesuai.
*Ada kemungkinan adanya sedikit perbedaan warna pada foto dengan aslinya karena perbedaan cahaya pada saat pengambilan gambar.
*Karena bentuk produk dan karakteristik proses di pabrikan, produk ini menghasilkan ketidakrataan warna karena tanda elektroda dan akumulasi udara pada saat pewarnaan.
*Harap dicatat bahwa spesifikasi produk dapat berubah karena alasan produsen. *If the top bridge or handlebar is not stock, it may not be able to be installed.
*The installation of models is not checked other than those listed in the compatibility check list.If your vehicle is not listed, it cannot be installed or has not been tested.
*The installation of the product to the models that are not listed in the compatibility check list is not guaranteed.
*The color of the product may vary depending on the shooting conditions, monitor, product lot, and left and right of the set product, but returns or exchanges is not accepted.
*Due to the characteristics of the product shape and manufacturing process, this product may have uneven color due to electrode marks and air accumulation during coloring.
*This product cannot be installed at the same time: The Grip Heater Set HG125 (JKZX2530G1) can be installed at the same time as the Grip Heater Set HG125 (JKZX2530G1), but it cannot be installed at the same time as the bracket that comes with the Grip Heater Set.In case of simultaneous installation with grip heater, please install the control switch on this product instead of the bracket attached to the grip heater set.
*There may be changes in product specifications due to the manufacturer's reasons.
Pastikan pemasangan dilakukan oleh mekanik berpengalaman yang memiliki pengetahuan umum dan keterampilan perawatan motor serta memiliki peralatan yang diperlukan.
*Jika motor Anda tidak ada di dalam daftar, berarti tidak bisa dipasang, atau tidak dapat dikonfirmasi.
Kami tidak dapat mengonfirmasi pemasangan pada model motor selain yang tercantum.
*Kami tidak menjamin kesesuaian produk untuk pemasangan pada motor yang tidak ada dalam daftar model motor yang sesuai.
*Ada kemungkinan adanya sedikit perbedaan warna pada foto dengan aslinya karena perbedaan cahaya pada saat pengambilan gambar.
*Karena bentuk produk dan karakteristik proses di pabrikan, produk ini menghasilkan ketidakrataan warna karena tanda elektroda dan akumulasi udara pada saat pewarnaan.
*Harap dicatat bahwa spesifikasi produk dapat berubah karena alasan produsen. *If the top bridge or handlebar is not stock, it may not be able to be installed.
*The installation of models is not checked other than those listed in the compatibility check list.If your vehicle is not listed, it cannot be installed or has not been tested.
*The installation of the product to the models that are not listed in the compatibility check list is not guaranteed.
*The color of the product may vary depending on the shooting conditions, monitor, product lot, and left and right of the set product, but returns or exchanges is not accepted.
*Due to the characteristics of the product shape and manufacturing process, this product may have uneven color due to electrode marks and air accumulation during coloring.
*This product cannot be installed at the same time: The Grip Heater Set HG125 (JKZX2530G1) can be installed at the same time as the Grip Heater Set HG125 (JKZX2530G1), but it cannot be installed at the same time as the bracket that comes with the Grip Heater Set.In case of simultaneous installation with grip heater, please install the control switch on this product instead of the bracket attached to the grip heater set.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/