- Beranda
- Motor
- HONDA 0 - 50cc
- MONKEY
- Sparepart Motor
- Rem
- Dudukan Kaliper Rem
- G-Craft
- G-Craft: Bracket Kaliper Rem Brembo 2P Tipe 2
Bracket Kaliper Rem Brembo 2P Tipe 2
- Nomor produk: 33198
-
- IN STOCK
- Out Stock
- G-Craft
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Bahan] Aluminium alloy A2017
[Finishing] Silver anodized
[Spesifikasi] Khusus untuk roto rem belakang (Φ160) NSR50/80
[Shock depan yang sesuai]
•NSR50/80
•NSF100
•NSRmini
[Material] Aluminum alloyA2017
[Finishing] Silver anodized
[Specification] Exclusive for NSR50/80 rear rotor (Φ160)
[Compatible Fork]
•NSR50/80
•NSF100
•NSRmini
[Finishing] Silver anodized
[Spesifikasi] Khusus untuk roto rem belakang (Φ160) NSR50/80
[Shock depan yang sesuai]
•NSR50/80
•NSF100
•NSRmini
[Material] Aluminum alloyA2017
[Finishing] Silver anodized
[Specification] Exclusive for NSR50/80 rear rotor (Φ160)
[Compatible Fork]
•NSR50/80
•NSF100
•NSRmini
[Deskripsi]
Part number: 39057 (model lama tanpa logo) telah diperbarui ke bracket (dengan logo) untuk model baru Yamaha Brembo.
Bracket kaliper yang menggunakan shock depan NSR50 / 80 dan dilengkapi dengan Yamaha Brembo (biasa disebut sebagai Yamambo).
Sesuai dengan pitch shock depan 173mm atau segitiga multi-type 199mm. (Ketika menggunakan ukuran 199mm, harap pakai hub depan tipe lebar)
Untuk velg 8 inci
Pitch 173mm bisa dipasang sampai lebar velg 2.75J, segitiga 199mm multi-type bisa dipasang sampai lebar velg 3.5J.
Untuk velg 10 inci
Pitch 173mm bisa dipasang sampai lebar velg 3.5J, dan pitch 199mm bisa dipasang sampai lebar velg 4.0J.
Hanya untuk piringan rem belakang NSR50 / 80 (Φ160)
[Perbedaan model lama dan baru]
Model baru: Champagne gold seperti yang digunakan di bawaan saat ini.
Model lama: Dark gold
Bentuk sambungan belakangnya juga berbeda.
Model baru memiliki garis di sambungannya.
Model lama tidak ada garis di sambungannya.
Part number: 39057 (model lama, tanpa logo). Alasan mengapa ini tidak bisa dipasang ke bracket ialah karena bentuk bagian ini (lihat foto) berbeda.
Part number: 39057 (old model without logo) has been renewed to support (with logo) for new model Yamaha Brembo.
A caliper support that uses an NSR50 / 80 fork and is equipped with a Yamaha Brembo (commonly known as Yamambo).
Compatible with fork pitch 173mm or 199mm multi-type stem kit. (When using 199m, use a wide front hub)
For 8-inch wheels
173mm pitch stem can be installed up to a rim width of 2.75J, 199mm multi-type stem can be installed up to rim width 3.5J.
For 10-inch wheels
173mm pitch stem can be installed up to a rim width of 3.5J, and the 199mm pitch stem can be installed up to a rim width of 4.0J.
For NSR50 / 80 rear rotor (Φ160) only
[How to distinguish between new and old models]
New model: Champagne gold that is currently used as genuine.
Old model: Dark gold
The shape of the joint on the back is also different.
The new model has a line at the joint.
The old model has a clean joint.
Part number: 39057 (old model, without logo). The reason why it cannot be attached to the support is that the shape of this part (see image) is different.
Bracket kaliper yang menggunakan shock depan NSR50 / 80 dan dilengkapi dengan Yamaha Brembo (biasa disebut sebagai Yamambo).
Sesuai dengan pitch shock depan 173mm atau segitiga multi-type 199mm. (Ketika menggunakan ukuran 199mm, harap pakai hub depan tipe lebar)
Untuk velg 8 inci
Pitch 173mm bisa dipasang sampai lebar velg 2.75J, segitiga 199mm multi-type bisa dipasang sampai lebar velg 3.5J.
Untuk velg 10 inci
Pitch 173mm bisa dipasang sampai lebar velg 3.5J, dan pitch 199mm bisa dipasang sampai lebar velg 4.0J.
Hanya untuk piringan rem belakang NSR50 / 80 (Φ160)
[Perbedaan model lama dan baru]
Model baru: Champagne gold seperti yang digunakan di bawaan saat ini.
Model lama: Dark gold
Bentuk sambungan belakangnya juga berbeda.
Model baru memiliki garis di sambungannya.
Model lama tidak ada garis di sambungannya.
Part number: 39057 (model lama, tanpa logo). Alasan mengapa ini tidak bisa dipasang ke bracket ialah karena bentuk bagian ini (lihat foto) berbeda.
Part number: 39057 (old model without logo) has been renewed to support (with logo) for new model Yamaha Brembo.
A caliper support that uses an NSR50 / 80 fork and is equipped with a Yamaha Brembo (commonly known as Yamambo).
Compatible with fork pitch 173mm or 199mm multi-type stem kit. (When using 199m, use a wide front hub)
For 8-inch wheels
173mm pitch stem can be installed up to a rim width of 2.75J, 199mm multi-type stem can be installed up to rim width 3.5J.
For 10-inch wheels
173mm pitch stem can be installed up to a rim width of 3.5J, and the 199mm pitch stem can be installed up to a rim width of 4.0J.
For NSR50 / 80 rear rotor (Φ160) only
[How to distinguish between new and old models]
New model: Champagne gold that is currently used as genuine.
Old model: Dark gold
The shape of the joint on the back is also different.
The new model has a line at the joint.
The old model has a clean joint.
Part number: 39057 (old model, without logo). The reason why it cannot be attached to the support is that the shape of this part (see image) is different.
Peringatan
*Membutuhkan modifikasi seperti pemotongan kampas rem karena Piringan cakram floating menutupi pin floating.
*Part number 39057 (tanpa logo) tidak kompatibel dengan Yamambo yang ada di pasaran saat ini.
*Foto produk yang ditampilkan adalah model lama tanpa logo.
*Foto produk mungkin menampilkan produk lain.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*The floating disc rotor interferes with the floating pin, so it is necessary to modify the brake pad by cutting it.
*Part Number: 39057 (without logo) is not compatible with the Yamambo currently on the market.
*Installed image is the old model without logo.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
*Part number 39057 (tanpa logo) tidak kompatibel dengan Yamambo yang ada di pasaran saat ini.
*Foto produk yang ditampilkan adalah model lama tanpa logo.
*Foto produk mungkin menampilkan produk lain.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*The floating disc rotor interferes with the floating pin, so it is necessary to modify the brake pad by cutting it.
*Part Number: 39057 (without logo) is not compatible with the Yamambo currently on the market.
*Installed image is the old model without logo.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/