- Beranda
- Motor
- SUZUKI 1001cc -
- V-STROM 1050
- Aksesoris
- Kelistrikan
- Multi-Bar Mounting Bar
- DAYTONA
- DAYTONA: Multi Bar USB
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Tipe klem dudukan stang panjang C
Bisa USB-C quick (USB PD3.0 / max 18W)
Pemasangan mudah, tinggal sambungkan ke saklar rem.
Klem dudukan stang: kanan dan kiri drat 60-110mm
Diameter pipa Φ22.2/Panjang 155mm/tinggi 64.3mm
Input
Voltase input: DC12V
Arus input maksimal (tanpa beban): 35mA atau kurang
Rentang voltase input: DC12V-16V
Output
Voltase output: 5V (4.7-5.35V), 9V (8.5-9.5V), 12V (11.4-12.6V)
Arus output: 5V/3A, 9V/2A, 12V/1.5A
Tegangan output: 18W
Fungsi pelindung
Pelindung agar tegangan output USB tidak lebih
Pelindung agar tidak arus pendek
Pelindung agar tidak overheat
Pelindung agar koneksi input tidak kembali: sekring tabung kaca mini (Φ5.2X20mm/250V 5A)
Panjang kabel
Trafo → terminal (-): Sekitar 450mm
Trafo → Terminal (+): Sekitar 450mm
Kabel saklar rem: Sekitar 270 mm, Sekitar 50 mm setelah dibuat cabang (Skun flat tipe 187)
Kabel sambungan: Sekitar 1, 200mm (+: Tipe CA/CB103)
Kabel sambungan: Sekitar 800mm (-: tipe CA103/stag terminal)
Charger yang sesuai
USB PD 3.0
Long Handlebar Post Clamp TYPEC
USB Type-C quick charge support (USB PD3.0 compatible / max 18W)
Simply connect to the brake switch for easy installation.
Handle post clamp:Right and left pitch 60-110mm
Pipe diameter Φ22.2/Length 155mm/Height 64.3mm
●Input
・Input Voltage: DC12V
Maximum input current (no load):35mA or less
Input voltage range:DC12V-16V
●Output
・Output voltage: 5V(4.7-5.35V),9V(8.5-9.5V),12V(11.4-12.6V)
Output current rating:5V/3A,9V/2A,12V/1.5A
Output rated efficiency:18W
●Protection function
USB output overcurrent protection:having
Output short circuit protection:having
Over-temperature protection:having
Input reverse connection prevention:Yes(Protection by glass tube fuse),Mini glass tube fuse(Φ5.2X20mm/250V 5A)
Harness length
transformer → terminal(-):Approx. 450mm
Transformer → Terminal(+):Approx. 450mm
Brake switch branch harness:Approx. 270 mm, approx. 50 mm after branching (Type 187 flat terminal)
・Extension harness: Approx. 1,200mm(+:CA/CB103 type)
・Extension harness: Approx. 800mm(-:CA103 type/stag terminal)
Supported charging standards
USB PD 3.0
Bisa USB-C quick (USB PD3.0 / max 18W)
Pemasangan mudah, tinggal sambungkan ke saklar rem.
Klem dudukan stang: kanan dan kiri drat 60-110mm
Diameter pipa Φ22.2/Panjang 155mm/tinggi 64.3mm
Input
Voltase input: DC12V
Arus input maksimal (tanpa beban): 35mA atau kurang
Rentang voltase input: DC12V-16V
Output
Voltase output: 5V (4.7-5.35V), 9V (8.5-9.5V), 12V (11.4-12.6V)
Arus output: 5V/3A, 9V/2A, 12V/1.5A
Tegangan output: 18W
Fungsi pelindung
Pelindung agar tegangan output USB tidak lebih
Pelindung agar tidak arus pendek
Pelindung agar tidak overheat
Pelindung agar koneksi input tidak kembali: sekring tabung kaca mini (Φ5.2X20mm/250V 5A)
Panjang kabel
Trafo → terminal (-): Sekitar 450mm
Trafo → Terminal (+): Sekitar 450mm
Kabel saklar rem: Sekitar 270 mm, Sekitar 50 mm setelah dibuat cabang (Skun flat tipe 187)
Kabel sambungan: Sekitar 1, 200mm (+: Tipe CA/CB103)
Kabel sambungan: Sekitar 800mm (-: tipe CA103/stag terminal)
Charger yang sesuai
USB PD 3.0
Long Handlebar Post Clamp TYPEC
USB Type-C quick charge support (USB PD3.0 compatible / max 18W)
Simply connect to the brake switch for easy installation.
Handle post clamp:Right and left pitch 60-110mm
Pipe diameter Φ22.2/Length 155mm/Height 64.3mm
●Input
・Input Voltage: DC12V
Maximum input current (no load):35mA or less
Input voltage range:DC12V-16V
●Output
・Output voltage: 5V(4.7-5.35V),9V(8.5-9.5V),12V(11.4-12.6V)
Output current rating:5V/3A,9V/2A,12V/1.5A
Output rated efficiency:18W
●Protection function
USB output overcurrent protection:having
Output short circuit protection:having
Over-temperature protection:having
Input reverse connection prevention:Yes(Protection by glass tube fuse),Mini glass tube fuse(Φ5.2X20mm/250V 5A)
Harness length
transformer → terminal(-):Approx. 450mm
Transformer → Terminal(+):Approx. 450mm
Brake switch branch harness:Approx. 270 mm, approx. 50 mm after branching (Type 187 flat terminal)
・Extension harness: Approx. 1,200mm(+:CA/CB103 type)
・Extension harness: Approx. 800mm(-:CA103 type/stag terminal)
Supported charging standards
USB PD 3.0
[Deskripsi]
Menyegarkan sekitar Handlebar dengan catu daya USB ke Multi Bar Holder.
Catu daya USB Type-C terpasang pada Multi Bar Holder.
Anda dapat memanfaatkan HolderSpace sebaik mungkin..
Desain Stylish dengan Gambar Bar End di PREMIUM ZONE.
USB PD 3.0 untuk pengisian cepat.
Pelindung Tutup Berputar Konektor dari air dan debu.
Handlebar PostQuantity: Sandingkan (untuk Kiri dan Kanan) Kompatibel dengan Pitch60-110mm.
Baut M8, Mesin Cuci M8, dengan Kerah.
Cocok untuk Harley-Davidson Handlebar Post saat digunakan dengan Bolt Collar Set Inch (77439) (kecuali beberapa model) ..
[Konektor USB Tipe-C untuk pengisian cepat]
Mendukung USB PD (PowerDelivery) dan dapat menghasilkan hingga 18W (5V / 3A, 9V / 2A, 12V / 1,5A).
[Bisa Tan koneksi ke saklar rem saja]
Tidak perlu khawatir kehabisan baterai dengan kunci utama.
Pemasangannya mudah hanya dengan mengencangkan sakelar rem ke baut pada rangka.
[Sumber daya USB dan Multi Bar Holder terintegrasi].
ClampSpace diamankan, dan Handlebar disegarkan dengan catu daya bawaan.. Multibar holder with USB power supply for a clean handlebar area.
The USB Type-C power supply is built into the multibar holder.
The holder space can be effectively utilized.
Stylish design inspired by the PREMIUM ZONE bar ends.
USB PD 3.0 supports fast charging.
The rotating cap protects the connector from water and dust.
Suitable for handle post pitch 60-110mm.
M8 bolt, M8 washer, collar included.
Can also be used with Bolt Collar Set inch (77439) to fit Harley-Davidson handle posts (except some models).
[USB Type-C connector for fast charging]
Supports USB PD (Power Delivery) up to 18W (5V/3A, 9V/2A, 12V/1.5A).
[Simply connect to the brake switch]
Linked to the main key, no need to worry about running out of battery.
Easy to install, simply cotighten the brake switch to the frame bolts.
[USB power supply and multibar holder in one]
The power supply is built into the unit, which makes the handlebar area clean and clear.
Catu daya USB Type-C terpasang pada Multi Bar Holder.
Anda dapat memanfaatkan HolderSpace sebaik mungkin..
Desain Stylish dengan Gambar Bar End di PREMIUM ZONE.
USB PD 3.0 untuk pengisian cepat.
Pelindung Tutup Berputar Konektor dari air dan debu.
Handlebar PostQuantity: Sandingkan (untuk Kiri dan Kanan) Kompatibel dengan Pitch60-110mm.
Baut M8, Mesin Cuci M8, dengan Kerah.
Cocok untuk Harley-Davidson Handlebar Post saat digunakan dengan Bolt Collar Set Inch (77439) (kecuali beberapa model) ..
[Konektor USB Tipe-C untuk pengisian cepat]
Mendukung USB PD (PowerDelivery) dan dapat menghasilkan hingga 18W (5V / 3A, 9V / 2A, 12V / 1,5A).
[Bisa Tan koneksi ke saklar rem saja]
Tidak perlu khawatir kehabisan baterai dengan kunci utama.
Pemasangannya mudah hanya dengan mengencangkan sakelar rem ke baut pada rangka.
[Sumber daya USB dan Multi Bar Holder terintegrasi].
ClampSpace diamankan, dan Handlebar disegarkan dengan catu daya bawaan.. Multibar holder with USB power supply for a clean handlebar area.
The USB Type-C power supply is built into the multibar holder.
The holder space can be effectively utilized.
Stylish design inspired by the PREMIUM ZONE bar ends.
USB PD 3.0 supports fast charging.
The rotating cap protects the connector from water and dust.
Suitable for handle post pitch 60-110mm.
M8 bolt, M8 washer, collar included.
Can also be used with Bolt Collar Set inch (77439) to fit Harley-Davidson handle posts (except some models).
[USB Type-C connector for fast charging]
Supports USB PD (Power Delivery) up to 18W (5V/3A, 9V/2A, 12V/1.5A).
[Simply connect to the brake switch]
Linked to the main key, no need to worry about running out of battery.
Easy to install, simply cotighten the brake switch to the frame bolts.
[USB power supply and multibar holder in one]
The power supply is built into the unit, which makes the handlebar area clean and clear.
Peringatan
*Jika baut, washer dan collar yang termasuk dalam produk ini tidak bisa digunakan, harap siapkan terpisah tergantung dari motornya.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen. *If the bolts, washers, and collars supplied with the product cannot be used for installation, please prepare them separately according to the vehicle.
*There may be changes in product specifications due to the manufacturer's reasons.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen. *If the bolts, washers, and collars supplied with the product cannot be used for installation, please prepare them separately according to the vehicle.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/