- Beranda
- Motor
- YAMAHA 401 - 750cc
- SR500
- Sparepart Motor
- Bodywork
- Jok & Aksesoris
- Jok
- K&H
- K&H: Jok Double A
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Garis jahitan] Model jahit
[Spesifikasi] Model tuck di tengah
[Tinggi jok] 800mm (Jok bawaan 790mm)
[Kesesuaian] Sesuai dengan cowl bawaan
[Sewing line] Stitching
[Specification]Tuck in the middle
[Seat height] 800mm (stock seat.)790mm)
[Compatible] Stock cowl compatible
[Spesifikasi] Model tuck di tengah
[Tinggi jok] 800mm (Jok bawaan 790mm)
[Kesesuaian] Sesuai dengan cowl bawaan
[Sewing line] Stitching
[Specification]Tuck in the middle
[Seat height] 800mm (stock seat.)790mm)
[Compatible] Stock cowl compatible
[Deskripsi]
Ini adalah double seat tebal yang bisa dipasang di OEMSeat Cowl yang bisa dipasang di semua model Karburator/FI (termasuk 5 model terakhir) (kecuali Model Awal '78) ..
Lebar permukaan kursi lebih lebar dari OEMSeat untuk meningkatkan kenyamanan berkendara, dan area tempat kaki diturunkan lebih sempit dan tidak terlalu bersudut untuk mencapai pijakan yang mirip dengan OEMSeat..
Semakin tinggi posisi duduk, semakin longgar tekukan lutut, dan semakin dekat postur berkendara dengan postur berdiri, semakin banyak beban pada bokong yang dipindahkan ke pijakan kaki..
Dengan menambah beban pijakan kaki, beban pada bokong berkurang, dan juga memudahkan pengoperasian kendaraan dengan pijakan kaki..
Ini adalah Kursi yang membuat tur panjang lebih nyaman dan menyenangkan..
Spons injeksi dipecat dalam cetakan..
Bantalannya bagus dan ada sedikit kerusakan dari waktu ke waktu, sehingga Anda dapat menggunakannya untuk waktu yang lama..
[Karakteristik]
Hitam polos digunakan untuk seluruh kulit, termasuk tuck roll di tengah kursi, dan garis jahitan selesai dengan jahitan.
Tipe dengan StitchLine memanjang ke sisi Tank..
[Instalasi]
Peredam Kursi harus dipindahkan dari OEMSeat untuk dipasang di kendaraan..
Pasang Braket yang terpasang ke sisi Tangki Bahan Bakar, dan perbaiki sisi belakang dengan Baut OEMSeat serta OEMSeat..
Dapat digunakan dengan OEM Grab Rail dan Rear Fender kami. This is a thick double seat that can be installed with the stock seat cowl for all years of carburetor / FI (including the last model 5) (except '78 early model).
The width of the seat surface is wider than the stock seat to improve the ride comfort, and the part where you put your feet down is narrower and less angular to achieve the same footing as the stock seat.
The higher the seating position, the looser the bend of the knees becomes, and the riding posture becomes closer to the standing posture, and the load of the buttocks is transferred to the step.
By increasing the step load, the load on the buttocks is reduced and it is easier to control the vehicle with the step.
It is a seat that makes long touring more comfortable and enjoyable.
The injection sponge is fired in the mold.
The cushioning is good and does not deteriorate over time, so you can use it for a long time.
[Features]
The entire leather, including the tuck roll in the center of the seat, is plain black with stitched seam lines.
The stitch line extends to the tank side.
[Installation]
It is necessary to transfer the seat damper from the stock seat for installation to the vehicle.
Install the attached bracket on the gasoline tank side, and fix the rear side with the stock seat bolts just like the stock seat.
It can be used with stock grab rails or K & H rear fenders.
Lebar permukaan kursi lebih lebar dari OEMSeat untuk meningkatkan kenyamanan berkendara, dan area tempat kaki diturunkan lebih sempit dan tidak terlalu bersudut untuk mencapai pijakan yang mirip dengan OEMSeat..
Semakin tinggi posisi duduk, semakin longgar tekukan lutut, dan semakin dekat postur berkendara dengan postur berdiri, semakin banyak beban pada bokong yang dipindahkan ke pijakan kaki..
Dengan menambah beban pijakan kaki, beban pada bokong berkurang, dan juga memudahkan pengoperasian kendaraan dengan pijakan kaki..
Ini adalah Kursi yang membuat tur panjang lebih nyaman dan menyenangkan..
Spons injeksi dipecat dalam cetakan..
Bantalannya bagus dan ada sedikit kerusakan dari waktu ke waktu, sehingga Anda dapat menggunakannya untuk waktu yang lama..
[Karakteristik]
Hitam polos digunakan untuk seluruh kulit, termasuk tuck roll di tengah kursi, dan garis jahitan selesai dengan jahitan.
Tipe dengan StitchLine memanjang ke sisi Tank..
[Instalasi]
Peredam Kursi harus dipindahkan dari OEMSeat untuk dipasang di kendaraan..
Pasang Braket yang terpasang ke sisi Tangki Bahan Bakar, dan perbaiki sisi belakang dengan Baut OEMSeat serta OEMSeat..
Dapat digunakan dengan OEM Grab Rail dan Rear Fender kami. This is a thick double seat that can be installed with the stock seat cowl for all years of carburetor / FI (including the last model 5) (except '78 early model).
The width of the seat surface is wider than the stock seat to improve the ride comfort, and the part where you put your feet down is narrower and less angular to achieve the same footing as the stock seat.
The higher the seating position, the looser the bend of the knees becomes, and the riding posture becomes closer to the standing posture, and the load of the buttocks is transferred to the step.
By increasing the step load, the load on the buttocks is reduced and it is easier to control the vehicle with the step.
It is a seat that makes long touring more comfortable and enjoyable.
The injection sponge is fired in the mold.
The cushioning is good and does not deteriorate over time, so you can use it for a long time.
[Features]
The entire leather, including the tuck roll in the center of the seat, is plain black with stitched seam lines.
The stitch line extends to the tank side.
[Installation]
It is necessary to transfer the seat damper from the stock seat for installation to the vehicle.
Install the attached bracket on the gasoline tank side, and fix the rear side with the stock seat bolts just like the stock seat.
It can be used with stock grab rails or K & H rear fenders.
Peringatan
*Seat cowl tidak termasuk, jadi gunakan seat cowl dari jok bawaan.
*Saat menggunakan cowl model karburator, perlu modif lubang pemasangan pada sisi cowl sekitar 3mm.
*Tidak bisa digunakan pada model motor awal 1978.
*Saat menggunakan bracket box brand Y's Gear, perlu memasang bracket mounting terbalik.
*Foto menampilkan produk lain.
*Harap diperhatikan bahwa spesifikasi produk mungkin berubah karena alasan produsen. *The seat cowl is not included, so please transfer the seat cowl from your stock seat.
*When using a cowl for a carburetor model, it is necessary to modify the mounting hole on the cowl side by 3mm.
*Not available for early model year 1978.
*When using with Y's gear carrier, it is necessary to attach the mounting bracket upside down.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
*Saat menggunakan cowl model karburator, perlu modif lubang pemasangan pada sisi cowl sekitar 3mm.
*Tidak bisa digunakan pada model motor awal 1978.
*Saat menggunakan bracket box brand Y's Gear, perlu memasang bracket mounting terbalik.
*Foto menampilkan produk lain.
*Harap diperhatikan bahwa spesifikasi produk mungkin berubah karena alasan produsen. *The seat cowl is not included, so please transfer the seat cowl from your stock seat.
*When using a cowl for a carburetor model, it is necessary to modify the mounting hole on the cowl side by 3mm.
*Not available for early model year 1978.
*When using with Y's gear carrier, it is necessary to attach the mounting bracket upside down.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/