- Beranda
- Motor
- HONDA 401 - 750cc
- CB500X (500X)
- Aksesoris
- Box Sepeda Motor
- Bracket Box Motor
- GIVI
- GIVI: Bracket Box Samping [PL4115]
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Hanya untuk motor dengan dudukan footstep belakang/spakbor belakang bawaan
Side case yang sesuai: TRK46/35/33,DLM36/30,ALA36,WL900,E22 OEMRear Fender/Rear fender rail/Tandem step holder only
Compatible Side case:TRK46/35/33,DLM36/30,ALA36,WL900,E22
Side case yang sesuai: TRK46/35/33,DLM36/30,ALA36,WL900,E22 OEMRear Fender/Rear fender rail/Tandem step holder only
Compatible Side case:TRK46/35/33,DLM36/30,ALA36,WL900,E22
Catatan
* Setelah dipesan, produk ini tidak dapat dibatalkan, dikembalikan, atau ditukar.
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
*Produk bisa memakan inden lebih dari 4 bulan dari Italia.
*Pemasangan mungkin memerlukan modifikasi.
*Produk ini tidak dapat dipasang sendiri di motor.
*Pengkabelan harus diperpanjang dengan part aksesoris untuk mengubah posisi lampu sein belakang.
*Karena jarak yang dekat antara knalpot dan side case kanan, harap hati-hati jangan sampai terkena panas knalpot yang dapat menyebabkan kerusakan side case.
*Fitting dari GIVI dan Daytona tidak untuk digunakan untuk box selain dari Givi.
*Produk mungkin memiliki ketidasamaan dalam warna, bekas las, goresan, dll karena proses pembuatan dan pengiriman.
*Pasang ke mekanik atau bengkel untuk menghindari box berbenturan dengan cowl atau hal yang tidak diinginkan lainnya.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*Harap diperhatikan bahwa pembatalan dan/atau pengembalian produk tidak dapat dilakukan setelah pesanan dibuat. *It takes more than 120 days to deliver the product from Italy.
*Additional work may be required and it may be difficult to install on the vehicle.
*This alone cannot be installed on a vehicle.
*The wiring needs to be extended with the accessory parts to change the position of the stock rear blinker.
*Because of the close distance between the exhaust and the right side case, be careful not to melt the case resin or burn the metal color due to exhaust heat.
*GIVI fittings and Daytona original fittings should not be used on non-GIVI cases.Daytona and GIVI cannot be held responsible in any way for the use of non-GIVI cases.
*There may be differences in painting, welding, surface treatment, scratches, burrs, and distortions due to product materials, manufacturing methods, individual product differences, and overseas shipping conditions.
*Due to the individual difference between the product and the vehicle, there is a possibility of hole misalignment, difference in parallelism between front and rear, left and right, and contact with the vehicle cowl, etc. Therefore, it is recommended to have the installation work done by a skilled mechanic at a well-equipped motorcycle shop or certified maintenance facility.For installation, temporarily fasten each part and finally tighten them while observing the condition.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
*Pemasangan mungkin memerlukan modifikasi.
*Produk ini tidak dapat dipasang sendiri di motor.
*Pengkabelan harus diperpanjang dengan part aksesoris untuk mengubah posisi lampu sein belakang.
*Karena jarak yang dekat antara knalpot dan side case kanan, harap hati-hati jangan sampai terkena panas knalpot yang dapat menyebabkan kerusakan side case.
*Fitting dari GIVI dan Daytona tidak untuk digunakan untuk box selain dari Givi.
*Produk mungkin memiliki ketidasamaan dalam warna, bekas las, goresan, dll karena proses pembuatan dan pengiriman.
*Pasang ke mekanik atau bengkel untuk menghindari box berbenturan dengan cowl atau hal yang tidak diinginkan lainnya.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*Harap diperhatikan bahwa pembatalan dan/atau pengembalian produk tidak dapat dilakukan setelah pesanan dibuat. *It takes more than 120 days to deliver the product from Italy.
*Additional work may be required and it may be difficult to install on the vehicle.
*This alone cannot be installed on a vehicle.
*The wiring needs to be extended with the accessory parts to change the position of the stock rear blinker.
*Because of the close distance between the exhaust and the right side case, be careful not to melt the case resin or burn the metal color due to exhaust heat.
*GIVI fittings and Daytona original fittings should not be used on non-GIVI cases.Daytona and GIVI cannot be held responsible in any way for the use of non-GIVI cases.
*There may be differences in painting, welding, surface treatment, scratches, burrs, and distortions due to product materials, manufacturing methods, individual product differences, and overseas shipping conditions.
*Due to the individual difference between the product and the vehicle, there is a possibility of hole misalignment, difference in parallelism between front and rear, left and right, and contact with the vehicle cowl, etc. Therefore, it is recommended to have the installation work done by a skilled mechanic at a well-equipped motorcycle shop or certified maintenance facility.For installation, temporarily fasten each part and finally tighten them while observing the condition.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/