- Beranda
- Motor
- BMW 251 - 400cc
- G310GS
- Sparepart Motor
- Bodywork
- Bracket Box
- GIVI
- GIVI: Special Rack [SR5126]
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Hanya untuk spakbor belakang/behel motor bawaan
Top case yang sesuai: Monokey, Monolock
Berat muatan maksimum (top case monokey): 6kg
[Produk yang harus dipasang secara bersamaan]
Mono key: M5 Base
Monolock: M5M Base For stock grab rail carrier / rear fender only
Compatible Top Cases: Monokey, Monolock
Maximum loading weight (monokey top case): 6kg
[specified items installed at the same time]
・Mono key: M5 Base
・Monolock: M5M Base
Top case yang sesuai: Monokey, Monolock
Berat muatan maksimum (top case monokey): 6kg
[Produk yang harus dipasang secara bersamaan]
Mono key: M5 Base
Monolock: M5M Base For stock grab rail carrier / rear fender only
Compatible Top Cases: Monokey, Monolock
Maximum loading weight (monokey top case): 6kg
[specified items installed at the same time]
・Mono key: M5 Base
・Monolock: M5M Base
Catatan
* Setelah dipesan, produk ini tidak dapat dibatalkan, dikembalikan, atau ditukar.
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
*Memerlukan waktu preorder lebih dari 3 bulan dari Italia.
*Kemungkinan perlu modifikasi untuk pemasangannya.
*Base MM tidak dapat digunakan dengan B32 dan case monolock kurang dari 30L dan base M5M tidak dapat digunakan dengan case monolock kurang dari 30L (B270N, B27N, B260NX, E250, E230, dan lainnya) karena stopper karet tidak pas di beberapa tempat sehingga dapat menyebabkan getaran saat berkendara.
*Fitting original GIVI dan Daytona tidak akan cocok untuk case selain GIVI.
*Kemungkinan ada perbedaan di pengecatan, pengelasan, finishing dan lainnya karena bahan produk, metode produksi dan kondisi pengiriman.
*Karena perbedaan individu antara produk dan motornya, ada kemungkinan ketidakpasan lubang, perbedaan depan dan belakang, kanan dan kiri, kontak dengan cowl motor dan lainnya. Pemasangan harap dilakukan di bengkel oleh mekanik berpengalaman.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*Harap diperhatikan bahwa pembatalan dan/atau pengembalian produk tidak dapat dilakukan setelah pesanan dibuat. *It takes more than 120 days to deliver the product from Italy.
*Additional work may be required and it may be difficult to install on the vehicle.
*MM base cannot be used with B32 and monolock cases less than 30l, and M5M base cannot be used with monolock cases less than 30l (B270N, B27N, B260NX, E250, E230, etc.) because the rubber stopper will not be in contact with some places and it will cause rattling during riding.
*GIVI fittings and Daytona original fittings should not be used on non-GIVI cases.Daytona and GIVI cannot be held responsible in any way for the use of non-GIVI cases.
*There may be differences in painting, welding, surface treatment, scratches, burrs, and distortions due to product materials, manufacturing methods, individual product differences, and overseas shipping conditions.
*Due to the individual difference between the product and the vehicle, there is a possibility of hole misalignment, difference in parallelism between front and rear, left and right, and contact with the vehicle cowl, etc. Therefore, it is recommended to have the installation work done by a skilled mechanic at a well-equipped motorcycle shop or certified maintenance facility.For installation, temporarily fasten each part and finally tighten them while observing the condition.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
*Kemungkinan perlu modifikasi untuk pemasangannya.
*Base MM tidak dapat digunakan dengan B32 dan case monolock kurang dari 30L dan base M5M tidak dapat digunakan dengan case monolock kurang dari 30L (B270N, B27N, B260NX, E250, E230, dan lainnya) karena stopper karet tidak pas di beberapa tempat sehingga dapat menyebabkan getaran saat berkendara.
*Fitting original GIVI dan Daytona tidak akan cocok untuk case selain GIVI.
*Kemungkinan ada perbedaan di pengecatan, pengelasan, finishing dan lainnya karena bahan produk, metode produksi dan kondisi pengiriman.
*Karena perbedaan individu antara produk dan motornya, ada kemungkinan ketidakpasan lubang, perbedaan depan dan belakang, kanan dan kiri, kontak dengan cowl motor dan lainnya. Pemasangan harap dilakukan di bengkel oleh mekanik berpengalaman.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*Harap diperhatikan bahwa pembatalan dan/atau pengembalian produk tidak dapat dilakukan setelah pesanan dibuat. *It takes more than 120 days to deliver the product from Italy.
*Additional work may be required and it may be difficult to install on the vehicle.
*MM base cannot be used with B32 and monolock cases less than 30l, and M5M base cannot be used with monolock cases less than 30l (B270N, B27N, B260NX, E250, E230, etc.) because the rubber stopper will not be in contact with some places and it will cause rattling during riding.
*GIVI fittings and Daytona original fittings should not be used on non-GIVI cases.Daytona and GIVI cannot be held responsible in any way for the use of non-GIVI cases.
*There may be differences in painting, welding, surface treatment, scratches, burrs, and distortions due to product materials, manufacturing methods, individual product differences, and overseas shipping conditions.
*Due to the individual difference between the product and the vehicle, there is a possibility of hole misalignment, difference in parallelism between front and rear, left and right, and contact with the vehicle cowl, etc. Therefore, it is recommended to have the installation work done by a skilled mechanic at a well-equipped motorcycle shop or certified maintenance facility.For installation, temporarily fasten each part and finally tighten them while observing the condition.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/