- Beranda
- Motor
- HONDA 401 - 750cc
- NC750X
- Aksesoris
- Box Sepeda Motor
- Bracket Box Motor
- HEPCO&BECKER
- HEPCO&BECKER: Dudukan casing samping "Sistem kuncinya
Dudukan casing samping "Sistem kuncinya
- Nomor produk: 650-9530-0001
-
- IN STOCK
- Out Stock
- HEPCO&BECKER
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
NC750X 21-
NC750X DCT 21-
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Kerah] Hitam
Permukaan akhir] PowderPainting daya tahan tinggi
[Color] Black
[Surface finish] High durability powder coating finish
Permukaan akhir] PowderPainting daya tahan tinggi
[Color] Black
[Surface finish] High durability powder coating finish
[Deskripsi]
Dudukan untuk memasang casing samping Hepco & Becker.
Sistem kunci" diadopsi untuk dengan mudah melepas tidak hanya Kasing tetapi juga Pemegang itu sendiri saat tidak diperlukan..
Sistem kunci" dapat dengan mudah dilepas dari dudukannya sendiri..
Desain kendaraan tidak terganggu bahkan saat casing samping tidak digunakan.
Dapat dipasang dan dihapus hanya dengan satu alat.
Bingkai memiliki struktur berlapis ganda dengan tambahan 1 buah pipa bertulang khusus dengan sifat berbeda di dalam pipa.
Ini adalah produk yang kuat dan nyaman. Holders for mounting HEPCO&BECKER side cases.
The "Lock it system" allows you to easily remove not only the case but also the holder itself when it is not necessary.
The "Lock-it system" allows the holder itself to be easily attached and detached.
When the side cases are not in use, they do not detract from the design of the vehicle.
This can be installed and removed with a single tool.
The frame has a double structure with an additional special reinforced pipe with different properties inside the pipe.
This is a robust and practical product.
Sistem kunci" diadopsi untuk dengan mudah melepas tidak hanya Kasing tetapi juga Pemegang itu sendiri saat tidak diperlukan..
Sistem kunci" dapat dengan mudah dilepas dari dudukannya sendiri..
Desain kendaraan tidak terganggu bahkan saat casing samping tidak digunakan.
Dapat dipasang dan dihapus hanya dengan satu alat.
Bingkai memiliki struktur berlapis ganda dengan tambahan 1 buah pipa bertulang khusus dengan sifat berbeda di dalam pipa.
Ini adalah produk yang kuat dan nyaman. Holders for mounting HEPCO&BECKER side cases.
The "Lock it system" allows you to easily remove not only the case but also the holder itself when it is not necessary.
The "Lock-it system" allows the holder itself to be easily attached and detached.
When the side cases are not in use, they do not detract from the design of the vehicle.
This can be installed and removed with a single tool.
The frame has a double structure with an additional special reinforced pipe with different properties inside the pipe.
This is a robust and practical product.
Peringatan
*Adaptor untuk dudukan casing samping terpasang ke casing samping, bukan dudukan casing samping. Adaptor dipasang pada casing samping karena diperlukan atau tidaknya adaptor tergantung pada casing samping.
* Harap dicatat bahwa produk yang sebenarnya mungkin berbeda dari produk ini dalam hal model pemasangan, warna, dll.
* Berisi bagian lain di foto.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan.
*Models equipped with a stock carrier are subject to the following conditions.
・Xplorer requires the case to be removed when opening the lid for contact.
・Alu Standard cannot be installed.
*The adapter for the side case holder is included in the side case, not in the side case holder.The adaptor is attached to the side case because the adaptor is required or not depending on the side case.
*Installation model, color, etc. may differ from the actual product.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
* Harap dicatat bahwa produk yang sebenarnya mungkin berbeda dari produk ini dalam hal model pemasangan, warna, dll.
* Berisi bagian lain di foto.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan.
*Models equipped with a stock carrier are subject to the following conditions.
・Xplorer requires the case to be removed when opening the lid for contact.
・Alu Standard cannot be installed.
*The adapter for the side case holder is included in the side case, not in the side case holder.The adaptor is attached to the side case because the adaptor is required or not depending on the side case.
*Installation model, color, etc. may differ from the actual product.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
NC750X 21-
NC750X DCT 21-
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/