- Beranda
- Motor
- HONDA 0 - 50cc
- MONKEY
- Sparepart Motor
- Sparepart Stang & Kemudi
- Stem / Bracket Bawah / Segitiga Stang
- G-Craft
- G-Craft: Satu Set Segitiga Stang [Tersedia Sekitar Akhir September 2021]
Satu Set Segitiga Stang [Tersedia Sekitar Akhir September 2021]
- Nomor produk: 31124
-
- IN STOCK
- Out Stock
- G-Craft
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Spesifikasi klem stang
untuk shock depan Φ30
Pitch shock depan 199mm, offset shock depan 40mm
Lubang pemasangan speedometer: M6 pitch 59mm, M8 pitch 110mm (2 cara untuk memasang)
Warna: Aluminium/ Finishing silver anodized
Warna mur segitiga: Black anodized
Termasuk as roda khusus Handlebar ClampSpec.
for Φ30 Fork
Fork pitch199mm,Fork offset40mm
Meter mounting hole:M6Pitch59mm,M8Pitch110mm(2 ways to install)
Collar:Aluminum/Silver Anodized Finishing
Stem NutColor:Black Anodized
Exclusive Axle Shaft included
untuk shock depan Φ30
Pitch shock depan 199mm, offset shock depan 40mm
Lubang pemasangan speedometer: M6 pitch 59mm, M8 pitch 110mm (2 cara untuk memasang)
Warna: Aluminium/ Finishing silver anodized
Warna mur segitiga: Black anodized
Termasuk as roda khusus Handlebar ClampSpec.
for Φ30 Fork
Fork pitch199mm,Fork offset40mm
Meter mounting hole:M6Pitch59mm,M8Pitch110mm(2 ways to install)
Collar:Aluminum/Silver Anodized Finishing
Stem NutColor:Black Anodized
Exclusive Axle Shaft included
[Deskripsi]
Pembaruan Penuh Stem Kit yang ada.
Didesain agar sesuai dengan bentuk, gaya dan kebutuhan modern.
Baut Handlebar Clamp menggunakan baut Taper.
Karena ini adalah tempat yang paling sering Anda lihat saat mengangkang, kami memperhatikan desainnya ..
Posisi Handlebar Clamp bisa diatur maju mundur 10mm.
Jika Anda tetap mengarahkan Stang ke arah Anda, Anda dapat meningkatkan jumlah tonjolan Fork ..
Ada dua cara untuk memasang meteran: M6 pitch 59mm dan M8 pitch 110mm ..
Braket bawah dikerjakan dari depan Batang untuk mencapai desain dan kekokohan ..
Ketebalan bagian Fork Clamp telah diubah dari M8 Bolt menjadi M5 Bolt ..
Stem Nut telah diubah dari aluminium anodized keras menjadi anodized hitam agar sesuai dengan berbagai kendaraan .. Full renewal of the existing stem kit.
It was designed to meet the shape, modern style and needs.
The handle clamps have tapered bolts.
Because it is the place where you see most when you step over, we paid attention to the design.
The position of the handle clamps can be adjusted 10mm back and forth.
When the handlebar is pulled forward, the fork can stick out more.
The meter can be mounted in two ways: M6 pitch 59mm and M8 pitch 110mm.
The under bracket is machined from the front of the stem to achieve both design and rigidity.
We changed the thickness of the fork clamp and the fixing method from M8 bolt to M5 bolt from the previous stem kit.
The stem nut has been changed from hard anodized aluminum to black anodized aluminum to match various vehicles.
Didesain agar sesuai dengan bentuk, gaya dan kebutuhan modern.
Baut Handlebar Clamp menggunakan baut Taper.
Karena ini adalah tempat yang paling sering Anda lihat saat mengangkang, kami memperhatikan desainnya ..
Posisi Handlebar Clamp bisa diatur maju mundur 10mm.
Jika Anda tetap mengarahkan Stang ke arah Anda, Anda dapat meningkatkan jumlah tonjolan Fork ..
Ada dua cara untuk memasang meteran: M6 pitch 59mm dan M8 pitch 110mm ..
Braket bawah dikerjakan dari depan Batang untuk mencapai desain dan kekokohan ..
Ketebalan bagian Fork Clamp telah diubah dari M8 Bolt menjadi M5 Bolt ..
Stem Nut telah diubah dari aluminium anodized keras menjadi anodized hitam agar sesuai dengan berbagai kendaraan .. Full renewal of the existing stem kit.
It was designed to meet the shape, modern style and needs.
The handle clamps have tapered bolts.
Because it is the place where you see most when you step over, we paid attention to the design.
The position of the handle clamps can be adjusted 10mm back and forth.
When the handlebar is pulled forward, the fork can stick out more.
The meter can be mounted in two ways: M6 pitch 59mm and M8 pitch 110mm.
The under bracket is machined from the front of the stem to achieve both design and rigidity.
We changed the thickness of the fork clamp and the fixing method from M8 bolt to M5 bolt from the previous stem kit.
The stem nut has been changed from hard anodized aluminum to black anodized aluminum to match various vehicles.
Peringatan
*Anda perlu menyediakan bracket speedometer sendiri. Tidak ada bracket dari G-Craft.
*Foto produk merupakan bagian dari produk lain.
*Harap perhatikan bahwa spesifikasi produk bisa berubah karena alasan produsen. *Please provide your own meter bracket.There are no brackets available from GeeCraft.
*Please note that some of the images are from other products.
*There may be changes in product specifications due to the manufacturer's reasons.
*Foto produk merupakan bagian dari produk lain.
*Harap perhatikan bahwa spesifikasi produk bisa berubah karena alasan produsen. *Please provide your own meter bracket.There are no brackets available from GeeCraft.
*Please note that some of the images are from other products.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/