- Beranda
- Motor
- HONDA 0 - 50cc
- CROSS CUB 50
- Sparepart Motor
- Sparepart Mesin
- Mesin
- Big Bore Kit / Silinder
- SP Takegawa
- SP Takegawa: Set Mesin Bore Up Hyper S-Stage 81cc
Set Mesin Bore Up Hyper S-Stage 81cc
- Nomor produk: 01-05-0129
-
- IN STOCK
- Out Stock
- SP Takegawa
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
81cc
Diameter bore: 48.5mm (Standar 37.8mm)
Rasio kompresi: 11.3: 1
[Limit RPM rev]
Ketika memakai noken as standar: 9000rpm
Ketika memakai noken as SP Takegawa: 9500rpm
[Isi produk]
•Bore Up Kit S Stage eco
•FI Controller 2 (Injection Controller)
Gear depan 15T
Plat pelindung gear
81cc
Bore Diameter: 48.5mm(Normal 37.8mm)
Compression ratio: 11.3: 1
[rev limit rpm]
When using normal camshaft:9000rpm
When using SP Takekawa camshafts:9500rpm
[Set components]
・S-stage Big Bore Kit
・FI Controller 2 (Injection Controller)
Drive sprocket 15T
Sprocket guard plate
Diameter bore: 48.5mm (Standar 37.8mm)
Rasio kompresi: 11.3: 1
[Limit RPM rev]
Ketika memakai noken as standar: 9000rpm
Ketika memakai noken as SP Takegawa: 9500rpm
[Isi produk]
•Bore Up Kit S Stage eco
•FI Controller 2 (Injection Controller)
Gear depan 15T
Plat pelindung gear
81cc
Bore Diameter: 48.5mm(Normal 37.8mm)
Compression ratio: 11.3: 1
[rev limit rpm]
When using normal camshaft:9000rpm
When using SP Takekawa camshafts:9500rpm
[Set components]
・S-stage Big Bore Kit
・FI Controller 2 (Injection Controller)
Drive sprocket 15T
Sprocket guard plate
[Deskripsi]
Anda dapat menikmati torsi yang sepenuhnya berbeda dari mesin normal ..
Kit Bore Up S Stage (Dengan Camshaft Olahraga)
S Stage Bore Up Kit menggunakan kepala silinder normal dan hanya perlu mengganti silinder dan piston menjadi 81cc..
Dengan mengubah mesin normal dari 50cc menjadi 81cc dan memasang Sports Camshaft dan FI Controller 2 SP Takekawa (Pengontrol Injeksi) , kinerja output ditingkatkan dan Torsi mengemudi sepenuhnya terwujud..
Selain itu, dengan memasang SP Takekawa Exhaust System secara bersamaan, performa output akan lebih ditingkatkan..
Sports Camshaft: Profil yang dioptimalkan untuk memaksimalkan kinerja kepala silinder normal dan meningkatkan kinerja output..
Pengontrol FI 2 (Pengontrol Injeksi)
Bore hingga kendaraan Injeksi, dll.. Saat Anda memasang bagian-bagian mesin mesin, level bahan bakar akan salah..
Kontroler Injeksi SP Mukawa memiliki peta bahan bakar 3D bawaan yang diatur sesuai dengan bagian-bagian mesin SP Mukawa.. Ini dapat dikonfigurasi untuk.
Anda tidak memerlukan PC sama sekali untuk mengubah pengaturan, dan Anda dapat dengan mudah mengubah pengaturan dengan mengganti sakelar putar bodi..
Pengontrol injeksi SP Mukawa mampu menginjeksi lebih banyak bahan bakar daripada volume injeksi maksimum komputer normal.
Anda juga dapat menambah atau mengurangi peta koreksi bawaan menjadi lebih gelap atau lebih terang secara total dengan menggunakan sakelar putar bodi..
Harness untuk setiap model mobil disertakan dan dapat dipasang dengan kabel minimum..
Ini memiliki fungsi pemotongan rev limiter.
Plat Pelindung Sproket
CROSS CUB50 (AA06) memiliki GuardPlate pada penutup sprocket depan untuk mencegah rantai Drive merusak bagian sekitarnya..
Saat Sprocket 15T/16TDrive SP Takekawa dipasang, produk ini diperlukan karena mengganggu OEM GuardPlate dan tidak dapat dipasang..
Nomor gigi Sproket NORMALDrive adalah 13T..
SteelDrive Sprocket: Sprocket Drive SP Mukawa tersedia dalam 5 tipe: 12T, 13T, 14T, 15T dan 16T.. You can enjoy the torque full output performance which is different from the stock engine.
■S Stage Big Bore Kit (Sports Camshaft Included)
The S-stage Big Bore Kit uses the stock cylinder head as it is, and by simply replacing the cylinder and piston, you can increase the engine size to 81cc.
By changing the stock engine from 50cc to 81cc, SP Takegawa's sports camshaft and FI-CON 2 (injection controller), the output performance is improved and the torque-full riding is realized.
By installing SP Takegawa's exhaust at the same time, the output performance will be further improved.
Sport Camshaft: This is the best profile to maximize the performance of the stock cylinder head and improve the output performance.
■FI Controller 2 (Injection Controller)
If you install engine parts such as big bore on an injected vehicle, the fuel balance will be out of tune.
SP Takegawa's injection controller has a built-in 3D fuel map that is set up to match SP Takegawa's engine parts and can be set up according to the bike's specifications.
You can easily change the settings by switching the rotary switch on the main unit, without the need for a PC.
SP Takegawa's injection controller is capable of injecting more fuel than the stock computer can.
In addition, the built-in correction map can be fine-tuned by using the rotary switch on the main unit.
A special harness for each model is included, so it can be installed with minimum wiring work.
It has a rev limiter cut function.
■Sprocket guard plate
The Cross Cub 50 (AA06) has a guard plate on the front sprocket cover to prevent the drive chain from damaging the surrounding parts.
When SP Takegawa's 15T / 16T drive sprocket is installed, this product is required because it cannot be installed due to interference with the stock guard plate.
■The tooth number of the stock drive sprocket is 13T.
■Steel drive sprocket: SP Takegawa drive sprockets are available in 5 types: 12T, 13T, 14T, 15T and 16T.
Kit Bore Up S Stage (Dengan Camshaft Olahraga)
S Stage Bore Up Kit menggunakan kepala silinder normal dan hanya perlu mengganti silinder dan piston menjadi 81cc..
Dengan mengubah mesin normal dari 50cc menjadi 81cc dan memasang Sports Camshaft dan FI Controller 2 SP Takekawa (Pengontrol Injeksi) , kinerja output ditingkatkan dan Torsi mengemudi sepenuhnya terwujud..
Selain itu, dengan memasang SP Takekawa Exhaust System secara bersamaan, performa output akan lebih ditingkatkan..
Sports Camshaft: Profil yang dioptimalkan untuk memaksimalkan kinerja kepala silinder normal dan meningkatkan kinerja output..
Pengontrol FI 2 (Pengontrol Injeksi)
Bore hingga kendaraan Injeksi, dll.. Saat Anda memasang bagian-bagian mesin mesin, level bahan bakar akan salah..
Kontroler Injeksi SP Mukawa memiliki peta bahan bakar 3D bawaan yang diatur sesuai dengan bagian-bagian mesin SP Mukawa.. Ini dapat dikonfigurasi untuk.
Anda tidak memerlukan PC sama sekali untuk mengubah pengaturan, dan Anda dapat dengan mudah mengubah pengaturan dengan mengganti sakelar putar bodi..
Pengontrol injeksi SP Mukawa mampu menginjeksi lebih banyak bahan bakar daripada volume injeksi maksimum komputer normal.
Anda juga dapat menambah atau mengurangi peta koreksi bawaan menjadi lebih gelap atau lebih terang secara total dengan menggunakan sakelar putar bodi..
Harness untuk setiap model mobil disertakan dan dapat dipasang dengan kabel minimum..
Ini memiliki fungsi pemotongan rev limiter.
Plat Pelindung Sproket
CROSS CUB50 (AA06) memiliki GuardPlate pada penutup sprocket depan untuk mencegah rantai Drive merusak bagian sekitarnya..
Saat Sprocket 15T/16TDrive SP Takekawa dipasang, produk ini diperlukan karena mengganggu OEM GuardPlate dan tidak dapat dipasang..
Nomor gigi Sproket NORMALDrive adalah 13T..
SteelDrive Sprocket: Sprocket Drive SP Mukawa tersedia dalam 5 tipe: 12T, 13T, 14T, 15T dan 16T.. You can enjoy the torque full output performance which is different from the stock engine.
■S Stage Big Bore Kit (Sports Camshaft Included)
The S-stage Big Bore Kit uses the stock cylinder head as it is, and by simply replacing the cylinder and piston, you can increase the engine size to 81cc.
By changing the stock engine from 50cc to 81cc, SP Takegawa's sports camshaft and FI-CON 2 (injection controller), the output performance is improved and the torque-full riding is realized.
By installing SP Takegawa's exhaust at the same time, the output performance will be further improved.
Sport Camshaft: This is the best profile to maximize the performance of the stock cylinder head and improve the output performance.
■FI Controller 2 (Injection Controller)
If you install engine parts such as big bore on an injected vehicle, the fuel balance will be out of tune.
SP Takegawa's injection controller has a built-in 3D fuel map that is set up to match SP Takegawa's engine parts and can be set up according to the bike's specifications.
You can easily change the settings by switching the rotary switch on the main unit, without the need for a PC.
SP Takegawa's injection controller is capable of injecting more fuel than the stock computer can.
In addition, the built-in correction map can be fine-tuned by using the rotary switch on the main unit.
A special harness for each model is included, so it can be installed with minimum wiring work.
It has a rev limiter cut function.
■Sprocket guard plate
The Cross Cub 50 (AA06) has a guard plate on the front sprocket cover to prevent the drive chain from damaging the surrounding parts.
When SP Takegawa's 15T / 16T drive sprocket is installed, this product is required because it cannot be installed due to interference with the stock guard plate.
■The tooth number of the stock drive sprocket is 13T.
■Steel drive sprocket: SP Takegawa drive sprockets are available in 5 types: 12T, 13T, 14T, 15T and 16T.
Peringatan
*Catatan untuk Bore Up Kit
Selalu gunakan bahan bakar oktan tinggi.
*Tentang penggunaan FI-CON 2 (Injection Controller)
FI-CON2 sudah dites kesesuaiannya ke motor yang umumnya dijual di Jepang. Kami belum mengonfirmasi kesesuaian ke model motor yang sama tapi buatan negara lain.
*Jangan dipasang dengan komponen mesin merk lain. Hail ini bisa menyebabkan kerusakan mesin.
*Jangan dipasang dengan lampu HID atau lampu depan LED dan lampu kabut dari merk lain.
*Ballast / inverter bisa mengeluarkan voltase tinggi yang bisa memengaruhi sirkuit digital, menyebabkan produk gagal berfungsi atau rusak.
*Jangan pasang switch lampu depan ON / OFF dan ignition merk lain secara bersamaan.
*Jangan pasang dengan ignition dan generator selain dari merk SP Takegawa.
*Untuk 17T, pelindung akan bentrok dan tidak bisa dipasang.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen. *Please note about the big bore kit
Always use high-octane gasoline as fuel.
SP Takegawa is not able to answer the questions about insurance and bike registration.
*Notice about FI-CON 2 (Injection Controller)
FI CON2 has been tested and confirmed to work only with bikes which is officially sold in Japan.We have not confirmed the compatibility with non-Japanese vehicles.
For bikes equipped with SP Takegawa engine parts.Do not use in conjunction with engine parts made by other companies.Failure to do so may result in engine malfunction or failure.
Please do not install aftermarket H.I.D kit or other company's LED headlight or fog lamp at the same time.Some ballasts / inverters (voltage conversion devices) emit high-voltage noise that adversely affects digital circuits, causing product failure or malfunction.
Please do not install the headlight ON/OFF switch and the aftermarket ignition system at the same time.
*For 17T, the guard will interfere and cannot be installed.
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
Selalu gunakan bahan bakar oktan tinggi.
*Tentang penggunaan FI-CON 2 (Injection Controller)
FI-CON2 sudah dites kesesuaiannya ke motor yang umumnya dijual di Jepang. Kami belum mengonfirmasi kesesuaian ke model motor yang sama tapi buatan negara lain.
*Jangan dipasang dengan komponen mesin merk lain. Hail ini bisa menyebabkan kerusakan mesin.
*Jangan dipasang dengan lampu HID atau lampu depan LED dan lampu kabut dari merk lain.
*Ballast / inverter bisa mengeluarkan voltase tinggi yang bisa memengaruhi sirkuit digital, menyebabkan produk gagal berfungsi atau rusak.
*Jangan pasang switch lampu depan ON / OFF dan ignition merk lain secara bersamaan.
*Jangan pasang dengan ignition dan generator selain dari merk SP Takegawa.
*Untuk 17T, pelindung akan bentrok dan tidak bisa dipasang.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen. *Please note about the big bore kit
Always use high-octane gasoline as fuel.
SP Takegawa is not able to answer the questions about insurance and bike registration.
*Notice about FI-CON 2 (Injection Controller)
FI CON2 has been tested and confirmed to work only with bikes which is officially sold in Japan.We have not confirmed the compatibility with non-Japanese vehicles.
For bikes equipped with SP Takegawa engine parts.Do not use in conjunction with engine parts made by other companies.Failure to do so may result in engine malfunction or failure.
Please do not install aftermarket H.I.D kit or other company's LED headlight or fog lamp at the same time.Some ballasts / inverters (voltage conversion devices) emit high-voltage noise that adversely affects digital circuits, causing product failure or malfunction.
Please do not install the headlight ON/OFF switch and the aftermarket ignition system at the same time.
*For 17T, the guard will interfere and cannot be installed.
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/