- Beranda
- Motor
- HONDA 251 - 400cc
- NS400
- Sparepart Motor
- Sparepart Mesin
- Radiator
- Radiator
- Thermostat
- DMR-JAPAN
- DMR-JAPAN: Termostat Rotemp
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[suhu pembukaan katup]
Produk OEM: Sudut Berdiri
Tipe 2:60 derajat
[Daftar Produk]
Termostat: 1 pc.
O-ring untuk Penutup: 1 pc
O-ring untuk bagian penyisipan: 1 pc
[valve opening temperature]
・Stock product: 65 degrees
・Type 2: 60 degrees
[Product Description]
・Thermostat: 1 pc.
・O-ring for cover: 1 pc.
・O-ring for insertion part: 1 pc.
Produk OEM: Sudut Berdiri
Tipe 2:60 derajat
[Daftar Produk]
Termostat: 1 pc.
O-ring untuk Penutup: 1 pc
O-ring untuk bagian penyisipan: 1 pc
[valve opening temperature]
・Stock product: 65 degrees
・Type 2: 60 degrees
[Product Description]
・Thermostat: 1 pc.
・O-ring for cover: 1 pc.
・O-ring for insertion part: 1 pc.
[Deskripsi]
[DMR-JAPANOriginal parts.]
Membantu mencegah kenaikan suhu dengan membuka katup pada suhu air yang lebih rendah dari OEM.
Dengan mengirimkan air pendingin ke Radiator lebih awal, itu akan mulai mendingin sebelum suhu air naik dan mencegah pemadaman listrik yang disebabkan oleh kenaikan suhu air..
Ketika suhu air tinggi, udara masuk mengembang secara termal, dan udara berdensitas rendah (Oksigen) menyebabkan mati listrik..
Dikatakan bahwa 50-60 derajat adalah rentang yang paling cocok untuk mesin Pembalap 2-tak dan 40-Derajat untuk Pekerjaan.. [DMR-JAPAN original parts]
The valve will open at a lower water temperature than stock to help prevent temperature rise.
By sending the coolant to the radiator early, it starts cooling before the water temperature rises and prevents the power down due to the water temperature rise.
When the water temperature is high, the intake air expands thermally, and the low-density air (oxygen) causes a power reduction.
For 2-stroke racers, it is said that 50-60 degrees is the best, and for works machines, it is said that 40 degrees is the target.
Membantu mencegah kenaikan suhu dengan membuka katup pada suhu air yang lebih rendah dari OEM.
Dengan mengirimkan air pendingin ke Radiator lebih awal, itu akan mulai mendingin sebelum suhu air naik dan mencegah pemadaman listrik yang disebabkan oleh kenaikan suhu air..
Ketika suhu air tinggi, udara masuk mengembang secara termal, dan udara berdensitas rendah (Oksigen) menyebabkan mati listrik..
Dikatakan bahwa 50-60 derajat adalah rentang yang paling cocok untuk mesin Pembalap 2-tak dan 40-Derajat untuk Pekerjaan.. [DMR-JAPAN original parts]
The valve will open at a lower water temperature than stock to help prevent temperature rise.
By sending the coolant to the radiator early, it starts cooling before the water temperature rises and prevents the power down due to the water temperature rise.
When the water temperature is high, the intake air expands thermally, and the low-density air (oxygen) causes a power reduction.
For 2-stroke racers, it is said that 50-60 degrees is the best, and for works machines, it is said that 40 degrees is the target.
Peringatan
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/