- Beranda
- Motor
- HONDA 126 - 250cc
- NSR250R
- Sparepart Motor
- Sparepart Mesin
- Mesin
- Kruk As
- DMR-JAPAN
- DMR-JAPAN: CrankOHKitA
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Daftar Produk]
・ RBearing 1pc.
・ Membawa 1 pc.
・ Bantalan 1pc.
Jarum untuk ujung besar 34 pcs
Jumlah Mesin Cuci SIDE: 1 Set 4pcs. (MC18・42X25X1,MC21/28・45X25X1.5 )
O-Ring (tidak ditampilkan di gambar)
[Product Description]
・R bearing1 pc.
・C bearing1 pc.
・L bearing1 pc.
・Needle for large end: 34 pieces
・Side washers: 4 sheets
・O-ring (*Not shown in the image)
・ RBearing 1pc.
・ Membawa 1 pc.
・ Bantalan 1pc.
Jarum untuk ujung besar 34 pcs
Jumlah Mesin Cuci SIDE: 1 Set 4pcs. (MC18・42X25X1,MC21/28・45X25X1.5 )
O-Ring (tidak ditampilkan di gambar)
[Product Description]
・R bearing1 pc.
・C bearing1 pc.
・L bearing1 pc.
・Needle for large end: 34 pieces
・Side washers: 4 sheets
・O-ring (*Not shown in the image)
[Deskripsi]
[DMR-JAPANOriginal parts.]
Suku cadang yang diperlukan untuk CrankOH sekarang tersedia dalam Kuantitas: Set!
Crank bearing dibuat oleh KOYO yang digunakan untuk produk OEM ..
SIDEWasher dan BearingNeedle dibuat khusus di pabrik kontrak Yamaha di Taiwan!
Bagian terpenting, Jarum, diuji oleh Vickers uji kekerasan dengan FOR JAPAN MODEL dan kontrol kualitas dilakukan di sekitar HRC62 ..
Silakan pilih dari (1) - (3) Ukuran seperti ada 3 jenis Jarum di Ujung Besar menurut standar Honda..
Ukur Pin ujung besar dan diameter dalam batang penghubung dan sesuaikan jarak bebas menjadi sekitar 0,030-40 ..
ID ujung besar. Celah 0,01 atau lebih dalam arah XY adalah batas penggunaan batang penghubung ..
Ukuran jarum distandarisasi seperti ini.
(1) 0--0,002 (91102-KV3-004)
(2) -0,002--0,004 (91103-KV3-004)
(3) -0,004--0,006 (91104-KV3-004)
Hanya JapanNeedle (3) Ukuran tersedia ..
(1) - (2) tersedia di Made in Taiwan dengan kontrol ketat pada kualitas produk..
Engkol adalah nyawa dari Engine itu sendiri!. Dapatkan ketenangan pikiran dengan merakit menggunakan komponen terkontrol kualitas terbaik. DMR-JAPAN original parts.
This kit contains all the necessary parts for crank OH!
The crank bearings are made by KOYO.
Side washers and large end bearings are custom made at Yamaha's contract factory in Taiwan!
As for the needle, which is the most important part, we conduct Vickers hardness test in Japan and control the quality to about HRC62.
There are three types of large end needles in the Honda standard, so please choose from sizes (1) to (3).
The needle size is standardized like this.
(1) 0 to -0.002 (91102-KV3-004)
(2) -0.002 to -0.004 (91103-KV3-004)
(3) -0.004 to -0.006 (91104-KV3-004)
Needle made in Japan (3) size is listed separately (HRC62 approx.)
The crank is the life of the engine.Assemble with the best quality-controlled parts and get a assurance.
Suku cadang yang diperlukan untuk CrankOH sekarang tersedia dalam Kuantitas: Set!
Crank bearing dibuat oleh KOYO yang digunakan untuk produk OEM ..
SIDEWasher dan BearingNeedle dibuat khusus di pabrik kontrak Yamaha di Taiwan!
Bagian terpenting, Jarum, diuji oleh Vickers uji kekerasan dengan FOR JAPAN MODEL dan kontrol kualitas dilakukan di sekitar HRC62 ..
Silakan pilih dari (1) - (3) Ukuran seperti ada 3 jenis Jarum di Ujung Besar menurut standar Honda..
Ukur Pin ujung besar dan diameter dalam batang penghubung dan sesuaikan jarak bebas menjadi sekitar 0,030-40 ..
ID ujung besar. Celah 0,01 atau lebih dalam arah XY adalah batas penggunaan batang penghubung ..
Ukuran jarum distandarisasi seperti ini.
(1) 0--0,002 (91102-KV3-004)
(2) -0,002--0,004 (91103-KV3-004)
(3) -0,004--0,006 (91104-KV3-004)
Hanya JapanNeedle (3) Ukuran tersedia ..
(1) - (2) tersedia di Made in Taiwan dengan kontrol ketat pada kualitas produk..
Engkol adalah nyawa dari Engine itu sendiri!. Dapatkan ketenangan pikiran dengan merakit menggunakan komponen terkontrol kualitas terbaik. DMR-JAPAN original parts.
This kit contains all the necessary parts for crank OH!
The crank bearings are made by KOYO.
Side washers and large end bearings are custom made at Yamaha's contract factory in Taiwan!
As for the needle, which is the most important part, we conduct Vickers hardness test in Japan and control the quality to about HRC62.
There are three types of large end needles in the Honda standard, so please choose from sizes (1) to (3).
The needle size is standardized like this.
(1) 0 to -0.002 (91102-KV3-004)
(2) -0.002 to -0.004 (91103-KV3-004)
(3) -0.004 to -0.006 (91104-KV3-004)
Needle made in Japan (3) size is listed separately (HRC62 approx.)
The crank is the life of the engine.Assemble with the best quality-controlled parts and get a assurance.
Peringatan
*Ketidaksejajaran 0,01 atau lebih pada arah XY dari lubang ujung besar adalah batas penggunaan batang penghubung.
* Cincin set tidak termasuk, silakan transfer yang asli.
* Washer samping untuk MC18 harus di-chamfer.
* Ukuran lain disertakan ke foto.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan. *Set ring is not included, please transfer the original one.
*Please chamfer the inner ring of the side washer.
*Measure the large end pin and connecting rod inner diameter and adjust the clearance so that it is approximately 0.03 to 0.04.The misalignment of 0.01 or more in the XY direction of the large end bore is the limit of use of the connecting rod.
*Images may contain other sizes.
*There may be changes in product specifications due to the manufacturer's reasons.
* Cincin set tidak termasuk, silakan transfer yang asli.
* Washer samping untuk MC18 harus di-chamfer.
* Ukuran lain disertakan ke foto.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan. *Set ring is not included, please transfer the original one.
*Please chamfer the inner ring of the side washer.
*Measure the large end pin and connecting rod inner diameter and adjust the clearance so that it is approximately 0.03 to 0.04.The misalignment of 0.01 or more in the XY direction of the large end bore is the limit of use of the connecting rod.
*Images may contain other sizes.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/