- Beranda
- Motor
- HONDA 126 - 250cc
- NSR250R
- Sparepart Motor
- Sparepart Mesin
- Radiator
- Radiator
- Water Pump
- T2 Racing
- T2 Racing: Pompa Air RESIN [Seri T2Racing VERTEX]
Pompa Air RESIN [Seri T2Racing VERTEX]
- Nomor produk: NE-N25-WP1821R
-
- IN STOCK
- Out Stock
- T2 Racing
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Untuk MC18/21 & MC28 (Poros umum)
[Bahan / Material]
Departemen GEAR:MCNylon (602ST)
Bagian poros: Dibuat oleh Chromoly
[Spec. GEAR Poros dapat dilepas/diganti
[Bagian Termasuk: Pompa Air AsliGEAR telah diganti dengan Stiker.
Dibuat di osaka jepang
■For MC18, MC21 & MC28 (common shaft)
[Material]
・Gear section: MC Nylon (602ST)
・Shaft section: Chromoly steel
[Specifications] Gear and shaft can be removed / replaced
[Components] Includes original water pump gear replacement sticker
Made in osaka japan
[Bahan / Material]
Departemen GEAR:MCNylon (602ST)
Bagian poros: Dibuat oleh Chromoly
[Spec. GEAR Poros dapat dilepas/diganti
[Bagian Termasuk: Pompa Air AsliGEAR telah diganti dengan Stiker.
Dibuat di osaka jepang
■For MC18, MC21 & MC28 (common shaft)
[Material]
・Gear section: MC Nylon (602ST)
・Shaft section: Chromoly steel
[Specifications] Gear and shaft can be removed / replaced
[Components] Includes original water pump gear replacement sticker
Made in osaka japan
[Deskripsi]
T2RacingOriginalPompa airGEARResinMC18・21 [T2Racing Bell Seri TECS].
Kami dengan senang hati mengumumkan pengenalan Bahan asli: Pompa Air PlastikGEAR, yang menggantikan pompa Air Produk HondaOEM yang saat ini dihentikan..
MCNylon (MC901Blue) adalah salah satu bahan resin yang paling cocok untuk pompa AirGEAR, tetapi T2Racing memilih MCNylon (MC602STBrown) ..
MCNylon's GEAR memiliki kualitas yang lebih tinggi daripada OEM GEAR, dan daya tahan, ketahanan benturan, pelumasan sendiri, dan ketenangannya meningkat secara dramatis..
MC602ST sedikit kurang dari MC901 ...
Laju perpanjangan karena kenaikan suhu tepat satu setengah.
Kekuatan mekanik meningkat 1,2 kali lipat pada suhu kamar dan bahkan lebih pada suhu tinggi.
Kekuatan mekanik (kekuatan lentur dan modulus elastisitas) meningkat 20-30% karena penguatan khusus ..
Dapat menahan suhu yang lebih tinggi, membuatnya ideal untuk digunakan di lingkungan bersuhu tinggi ..
Ketahanan panasnya mencapai 150 derajat !.
Dari segi bahan baku, harganya sekitar dua kali lebih mahal.
Ini lebih mahal, tetapi ini adalah resin kelas tertinggi termasuk MCNylon dan resin umum..
Bahan sebelumnya: AluminiumGEAR terbuat dari Duralumin berkualitas tinggi dengan Lapisan Kashima Anodized yang keras untuk membuatnya "benar-benar tidak dapat dipecahkan", dan memiliki ketahanan gesekan yang lebih sedikit daripada OEMGEAR. Hal ini efektif untuk menjaga film minyak dan mengurangi sumber panas dengan gesekan..
Kami bertujuan untuk produk yang "benar-benar tidak bisa dipecahkan" plus "ringan"..
Seperti yang Anda lihat di gambar, berat OEMGEAR adalah 78.9g.
Model sebelumnya, Material:AluminumGEAR, beratnya 90.0g dan sedikit lebih berat..
Kali ini, kami berhasil mengurangi berat Material: PlasticGEAR menjadi 73.7g!
Poros terbuat dari Chromoly seperti sebelumnya Bahan: Aluminium..
Sama dll seperti StandardMission of Manufacturer. Kekerasan bahan/permukaan selesai.
Poros dan GEAR dapat dilepas dan dipasang kembali dengan kunci dan snap ring..
Untuk MC18/21 dan MC28, Poros adalah umum..
Bahkan jika Anda berganti ke jenis kendaraan yang berbeda, Anda dapat menggunakannya hanya dengan mengganti GEAR..
Kami juga menjual GEAR only/Shaft only sebagai reparasi akibat kerusakan akibat penuaan..
Produk dibungkus dengan kertas tahan penguapan untuk penyimpanan jangka panjang .. T2 Racing Original Water Pump Gear Resin MC18 / 21 [T2 Racing Vertex Series]
This is the original plastic water pump gear to replace the HONDA stock water pump gear which is now discontinued.
MC Nylon (MC901 Blue) is the most suitable resin material for water pump gears, but T2 Racing has selected MC Nylon (MC602ST Brown).
MC NYLON gears are of higher quality than stock gears, with dramatically improved durability, impact resistance, self-lubrication, and quietness, and are said to be more resistant to wear from foreign matter (iron powder) than metal.
MC602ST compared to MC901
The elongation rate due to temperature rise is exactly half.
The mechanical strength is 1.2 times higher at room temperature and even higher at high temperatures.
The mechanical strength (bending strength and elastic modulus) is 20-30% higher due to the special reinforcing agent filling.
The heat resistance temperature is also higher, making it ideal for parts used in high temperature environments.
Its heat resistance is a whopping 150 degrees.
The price of the raw material is about twice as high as that of the original, which makes it very expensive.
Although it is more expensive, it is the highest grade of resin, including MC nylon and general resins.
The previous aluminum gears were made of high quality super duralumin with hard anodized aluminum coating to make them "absolutely unbreakable", and they had less frictional resistance on the sliding parts than the stock gears, and they were effective in retaining the oil film and reducing the heat source caused by gear friction.
We aimed to make this product "absolutely unbreakable" and "lightweight".
As you can see in the picture, the weight of the stock gear is 78.9g.
The previous aluminum gear was a little heavier at 90.0g.
T2 Racing has succeeded in reducing the weight of this resin gear to 73.7g!
The shaft is made of chromoly as well as the previous one made of aluminum.
The material and surface hardness are equivalent to the manufacturer's standard mission.
The shaft and gear can be connected and disconnected with a key or snap ring.
Shaft for MC18 / 21 and MC28 are the same.
Even if you change to a different type of vehicle, you can use it by changing only the gear.
It also sells only gears and shafts for repair due to age-related deterioration.
The product is delivered wrapped in anti-corrosive paper, so it is safe for long-term storage.
Kami dengan senang hati mengumumkan pengenalan Bahan asli: Pompa Air PlastikGEAR, yang menggantikan pompa Air Produk HondaOEM yang saat ini dihentikan..
MCNylon (MC901Blue) adalah salah satu bahan resin yang paling cocok untuk pompa AirGEAR, tetapi T2Racing memilih MCNylon (MC602STBrown) ..
MCNylon's GEAR memiliki kualitas yang lebih tinggi daripada OEM GEAR, dan daya tahan, ketahanan benturan, pelumasan sendiri, dan ketenangannya meningkat secara dramatis..
MC602ST sedikit kurang dari MC901 ...
Laju perpanjangan karena kenaikan suhu tepat satu setengah.
Kekuatan mekanik meningkat 1,2 kali lipat pada suhu kamar dan bahkan lebih pada suhu tinggi.
Kekuatan mekanik (kekuatan lentur dan modulus elastisitas) meningkat 20-30% karena penguatan khusus ..
Dapat menahan suhu yang lebih tinggi, membuatnya ideal untuk digunakan di lingkungan bersuhu tinggi ..
Ketahanan panasnya mencapai 150 derajat !.
Dari segi bahan baku, harganya sekitar dua kali lebih mahal.
Ini lebih mahal, tetapi ini adalah resin kelas tertinggi termasuk MCNylon dan resin umum..
Bahan sebelumnya: AluminiumGEAR terbuat dari Duralumin berkualitas tinggi dengan Lapisan Kashima Anodized yang keras untuk membuatnya "benar-benar tidak dapat dipecahkan", dan memiliki ketahanan gesekan yang lebih sedikit daripada OEMGEAR. Hal ini efektif untuk menjaga film minyak dan mengurangi sumber panas dengan gesekan..
Kami bertujuan untuk produk yang "benar-benar tidak bisa dipecahkan" plus "ringan"..
Seperti yang Anda lihat di gambar, berat OEMGEAR adalah 78.9g.
Model sebelumnya, Material:AluminumGEAR, beratnya 90.0g dan sedikit lebih berat..
Kali ini, kami berhasil mengurangi berat Material: PlasticGEAR menjadi 73.7g!
Poros terbuat dari Chromoly seperti sebelumnya Bahan: Aluminium..
Sama dll seperti StandardMission of Manufacturer. Kekerasan bahan/permukaan selesai.
Poros dan GEAR dapat dilepas dan dipasang kembali dengan kunci dan snap ring..
Untuk MC18/21 dan MC28, Poros adalah umum..
Bahkan jika Anda berganti ke jenis kendaraan yang berbeda, Anda dapat menggunakannya hanya dengan mengganti GEAR..
Kami juga menjual GEAR only/Shaft only sebagai reparasi akibat kerusakan akibat penuaan..
Produk dibungkus dengan kertas tahan penguapan untuk penyimpanan jangka panjang .. T2 Racing Original Water Pump Gear Resin MC18 / 21 [T2 Racing Vertex Series]
This is the original plastic water pump gear to replace the HONDA stock water pump gear which is now discontinued.
MC Nylon (MC901 Blue) is the most suitable resin material for water pump gears, but T2 Racing has selected MC Nylon (MC602ST Brown).
MC NYLON gears are of higher quality than stock gears, with dramatically improved durability, impact resistance, self-lubrication, and quietness, and are said to be more resistant to wear from foreign matter (iron powder) than metal.
MC602ST compared to MC901
The elongation rate due to temperature rise is exactly half.
The mechanical strength is 1.2 times higher at room temperature and even higher at high temperatures.
The mechanical strength (bending strength and elastic modulus) is 20-30% higher due to the special reinforcing agent filling.
The heat resistance temperature is also higher, making it ideal for parts used in high temperature environments.
Its heat resistance is a whopping 150 degrees.
The price of the raw material is about twice as high as that of the original, which makes it very expensive.
Although it is more expensive, it is the highest grade of resin, including MC nylon and general resins.
The previous aluminum gears were made of high quality super duralumin with hard anodized aluminum coating to make them "absolutely unbreakable", and they had less frictional resistance on the sliding parts than the stock gears, and they were effective in retaining the oil film and reducing the heat source caused by gear friction.
We aimed to make this product "absolutely unbreakable" and "lightweight".
As you can see in the picture, the weight of the stock gear is 78.9g.
The previous aluminum gear was a little heavier at 90.0g.
T2 Racing has succeeded in reducing the weight of this resin gear to 73.7g!
The shaft is made of chromoly as well as the previous one made of aluminum.
The material and surface hardness are equivalent to the manufacturer's standard mission.
The shaft and gear can be connected and disconnected with a key or snap ring.
Shaft for MC18 / 21 and MC28 are the same.
Even if you change to a different type of vehicle, you can use it by changing only the gear.
It also sells only gears and shafts for repair due to age-related deterioration.
The product is delivered wrapped in anti-corrosive paper, so it is safe for long-term storage.
Peringatan
* Produk ini adalah suku cadang balap.
* Berisi bagian lain di foto.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan.
*This product is a racing part.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
* Berisi bagian lain di foto.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan.
*This product is a racing part.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/