- Beranda
- Motor
- APRILIA 401 - 750cc
- RS 660
- Sparepart Motor
- Suspensi / Rearset / Velg / Swingarm
- Foot Control
- Sparepart Bracket / Footstep Belakang Lainnya
- CNC Racing
- CNC Racing: Pelat Pengosongan Pijakan Kaki Belakang
Pelat Pengosongan Pijakan Kaki Belakang
- Nomor produk: PET53B
-
- IN STOCK
- Out Stock
- CNC Racing
- |
- 4.0
- (1 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
[Deskripsi]
Pelat yang terbuat dari aluminium mesin billet dan kemudian dianodisasi permukaannya.
Dirancang untuk mengisi lubang sekrup setelah Anda melepas gantungan pembonceng sandaran kaki belakang, melindunginya dari air dan kotoran. Desain pelat juga dipelajari untuk memberikan titik pemasangan untuk tali pengikat selama pengangkutan.
Mereka juga dapat dipasang sebagai spacer pada braket belakang untuk memungkinkan posisi yang lebih nyaman bagi penumpang berkat tingginya 25,00 mm.
Kit ini terdiri dari sepasang pelat, sekrup dan spacer untuk perakitan yang benar di kedua mode. Plates made of billet-machined aluminium and subsequently surface anodised.
Designed to fill the screw's holes once you have removed the rear footrest pillion hangers,protecting them from water and dirt. The design of the plates is also studied to provide a fixing point for the straps during transport.
They can also be mounted as spacers on the rear brackets to allow a more comfortable position for the passenger thanks to their height of 25,00 mm.
The kit consists of a pair of plates,screws and spacers for correct assembly in both modes.
Dirancang untuk mengisi lubang sekrup setelah Anda melepas gantungan pembonceng sandaran kaki belakang, melindunginya dari air dan kotoran. Desain pelat juga dipelajari untuk memberikan titik pemasangan untuk tali pengikat selama pengangkutan.
Mereka juga dapat dipasang sebagai spacer pada braket belakang untuk memungkinkan posisi yang lebih nyaman bagi penumpang berkat tingginya 25,00 mm.
Kit ini terdiri dari sepasang pelat, sekrup dan spacer untuk perakitan yang benar di kedua mode. Plates made of billet-machined aluminium and subsequently surface anodised.
Designed to fill the screw's holes once you have removed the rear footrest pillion hangers,protecting them from water and dirt. The design of the plates is also studied to provide a fixing point for the straps during transport.
They can also be mounted as spacers on the rear brackets to allow a more comfortable position for the passenger thanks to their height of 25,00 mm.
The kit consists of a pair of plates,screws and spacers for correct assembly in both modes.
Peringatan
* Harap dicatat bahwa semua instruksi manual ditulis dalam bahasa Inggris dan bahasa asing lainnya.
* Logo dapat diubah tergantung pada lot produksi pabrikan.
* Beberapa di antaranya tidak bertanda "MADE IN ITALY" atau tidak berlogo "CNC". Anda tidak dapat menentukan desain logo. Anda tidak dapat menentukannya.
* Harap dicatat bahwa kami tidak menerima pembatalan dan pengembalian pesanan Anda karena perubahan desain logo.
* Ada beberapa kasus yang mengandung warna lain di foto.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan. *If you have purchased a CNC Racing product from Webike, please contact Webike with any questions about the product.
*All instruction manuals are in English and other languages.
*Logos may change depending on the product of the manufacturer's production lot.
*Some products are not marked with "MADE IN ITALY" or only "CNC" logo.(Designed like the logo on the manufacturer's website) You cannot specify.
*We do not accept cancellations or returns due to changes in logo design specifications.
*Images may contain other colors.
*There may be changes in product specifications due to the manufacturer's reasons.
* Logo dapat diubah tergantung pada lot produksi pabrikan.
* Beberapa di antaranya tidak bertanda "MADE IN ITALY" atau tidak berlogo "CNC". Anda tidak dapat menentukan desain logo. Anda tidak dapat menentukannya.
* Harap dicatat bahwa kami tidak menerima pembatalan dan pengembalian pesanan Anda karena perubahan desain logo.
* Ada beberapa kasus yang mengandung warna lain di foto.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan. *If you have purchased a CNC Racing product from Webike, please contact Webike with any questions about the product.
*All instruction manuals are in English and other languages.
*Logos may change depending on the product of the manufacturer's production lot.
*Some products are not marked with "MADE IN ITALY" or only "CNC" logo.(Designed like the logo on the manufacturer's website) You cannot specify.
*We do not accept cancellations or returns due to changes in logo design specifications.
*Images may contain other colors.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/