- Beranda
- Motor
- HONDA 126 - 250cc
- MVX250
- Sparepart Motor
- Sparepart Mesin
- Radiator
- Radiator
- Water Pump
- DMR-JAPAN
- DMR-JAPAN: Kit OH Segel Mekanis
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Komponen]
SEAL MEKANIK
Bantalan untuk Poros
Segel Minyak untuk Poros
O-ring untuk Cover
O-ring untuk Bagian Penyisipan Mesin [Product Description]
・Mechanical seal
・Bearings for shafts
・Oil seal for shaft
・O-ring for cover
・O-ring of the engine insertion part
SEAL MEKANIK
Bantalan untuk Poros
Segel Minyak untuk Poros
O-ring untuk Cover
O-ring untuk Bagian Penyisipan Mesin [Product Description]
・Mechanical seal
・Bearings for shafts
・Oil seal for shaft
・O-ring for cover
・O-ring of the engine insertion part
[Deskripsi]
Ini adalah suku cadang asli DMR-JAPAN
Set bagian internal yang diperlukan untuk OH!
Bagaimana cara menginstall
1. Lakukan pemanasan dengan senapan panas untuk melonggarkan pin ketukan dengan perbedaan ekspansi termal.
2. Ketuk secara merata ke arah pembukaan dengan palu plastik untuk membukanya.
3. Pastikan menggunakan pres hidrolik karena tekanan tidak dapat dihilangkan dengan cara mengetuk dengan palu.
4. Periksa apakah baling-baling tidak mengganggu alas sebelum memberikan tekanan untuk menariknya keluar.
5. Karena toleransi antara poros dan roda gigi besar, harap oleskan oli sebelum pemasangan tekan.
6. Tekan-paskan gigi ke 28.2mm dari permukaan ujung poros. Disarankan untuk membuat kerah sepanjang 28.2mm untuk menghindari penekanan yang berlebihan. DMR-JAPAN original parts
Internal parts required for OH are included in this set!
How to install
1. Heat up with a heat gun to loosen the knock pin by thermal expansion difference.
2. Open the door by tapping it evenly in the direction of opening with a plastic hammer.
3. It is not a pressure that can be removed by hammering, so be sure to work with a hydraulic press.
4. Check that the impeller does not interfere with the base, and then pull it out by applying pressure.
5. Since the tolerance between the shaft and gear is large, it is quite tight, so please apply oil before press fitting.
6. Press-fit the gear up to 28.2mm from the end face of the shaft.It is recommended to make the collar 28.2mm long to avoid pushing it in too far.
Set bagian internal yang diperlukan untuk OH!
Bagaimana cara menginstall
1. Lakukan pemanasan dengan senapan panas untuk melonggarkan pin ketukan dengan perbedaan ekspansi termal.
2. Ketuk secara merata ke arah pembukaan dengan palu plastik untuk membukanya.
3. Pastikan menggunakan pres hidrolik karena tekanan tidak dapat dihilangkan dengan cara mengetuk dengan palu.
4. Periksa apakah baling-baling tidak mengganggu alas sebelum memberikan tekanan untuk menariknya keluar.
5. Karena toleransi antara poros dan roda gigi besar, harap oleskan oli sebelum pemasangan tekan.
6. Tekan-paskan gigi ke 28.2mm dari permukaan ujung poros. Disarankan untuk membuat kerah sepanjang 28.2mm untuk menghindari penekanan yang berlebihan. DMR-JAPAN original parts
Internal parts required for OH are included in this set!
How to install
1. Heat up with a heat gun to loosen the knock pin by thermal expansion difference.
2. Open the door by tapping it evenly in the direction of opening with a plastic hammer.
3. It is not a pressure that can be removed by hammering, so be sure to work with a hydraulic press.
4. Check that the impeller does not interfere with the base, and then pull it out by applying pressure.
5. Since the tolerance between the shaft and gear is large, it is quite tight, so please apply oil before press fitting.
6. Press-fit the gear up to 28.2mm from the end face of the shaft.It is recommended to make the collar 28.2mm long to avoid pushing it in too far.
Peringatan
*Penggantian mechanical seal membutuhkan keahlian.*Jika Anda tidak yakin tentang penggantian, silakan berkonsultasi dengan toko sepeda motor terdekat.
* Spesifikasi dapat berubah tanpa pemberitahuan. *Technical knowledge is required to replace the mechanical seal.If you are not confident about the replacement, please consult your local bike shop.
*There may be changes in product specifications due to the manufacturer's reasons.
*Inspect the sliding parts of the mechanical seal for damage before assembly.There is no warranty after installation.
* Spesifikasi dapat berubah tanpa pemberitahuan. *Technical knowledge is required to replace the mechanical seal.If you are not confident about the replacement, please consult your local bike shop.
*There may be changes in product specifications due to the manufacturer's reasons.
*Inspect the sliding parts of the mechanical seal for damage before assembly.There is no warranty after installation.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/