- Beranda
- Sparepart Motor
- Sparepart Stang & Kemudi
- Sistem Kendali
- Handguard
- ZETA
- ZETA: Handguard SONIC dengan Pelindung
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Universal]
Warna
Body: Black
Pelindung PC: Light smoke
Bahan
Knuckle guard: PU resin
Arm: Aluminium forging
Plat depan: Aluminium alloy berkekuatan tinggi
Pelindung: Polycarbonate
Baut/mur: Stainless Steel
Adaptor plug: Baja
Jalu stang: Aluminium alloy berkekuatan tinggi
[Tipe M16/M8]
[Universal]
Collar
Body:Black
PCProtector:Light smoke
·Exchangeable sealing gasket
Knuckle guard:PU resin
Arm:Aluminum Forging
Front plate:High Strength Aluminum Alloy
Protector:Polycarbonate
Attached Bolt/Nut:Stainless Steel
Plug adapter:Steel
Bar end plug:High Strength Aluminum Alloy
[M16/M8Type]
Collar
Body:Black
PCProtector:Light smoke
·Exchangeable sealing gasket
Knuckle guard:PU resin
Arm:Aluminum Forging
Front plate:High Strength Aluminum Alloy
Protector:Polycarbonate
Attached Bolt/Nut:Stainless Steel
Plug adapter:High Strength Aluminum Alloy
Bar end plug:High Strength Aluminum Alloy
Warna
Body: Black
Pelindung PC: Light smoke
Bahan
Knuckle guard: PU resin
Arm: Aluminium forging
Plat depan: Aluminium alloy berkekuatan tinggi
Pelindung: Polycarbonate
Baut/mur: Stainless Steel
Adaptor plug: Baja
Jalu stang: Aluminium alloy berkekuatan tinggi
[Tipe M16/M8]
[Universal]
Collar
Body:Black
PCProtector:Light smoke
·Exchangeable sealing gasket
Knuckle guard:PU resin
Arm:Aluminum Forging
Front plate:High Strength Aluminum Alloy
Protector:Polycarbonate
Attached Bolt/Nut:Stainless Steel
Plug adapter:Steel
Bar end plug:High Strength Aluminum Alloy
[M16/M8Type]
Collar
Body:Black
PCProtector:Light smoke
·Exchangeable sealing gasket
Knuckle guard:PU resin
Arm:Aluminum Forging
Front plate:High Strength Aluminum Alloy
Protector:Polycarbonate
Attached Bolt/Nut:Stainless Steel
Plug adapter:High Strength Aluminum Alloy
Bar end plug:High Strength Aluminum Alloy
[Deskripsi]
PolycarbonateProtector sebagai Perlengkapan Standar.
Pelindung tangan bergaya dengan pelindung tangan tipe sambungan ujung batangPolycarbonate (PC) Pelindung sebagai Perlengkapan Standar.
The Polycarbonate (PC) , yang tahan terhadap benturan, sinar ultraviolet, suhu rendah dan tinggi, adalah desain yang sederhana dan bergaya yang sangat universal dan dapat digunakan di semua jenis kendaraan..
Tidak hanya meningkatkan efek tahan angin, tetapi juga memiliki fungsi mengurangi benturan dari depan..
Instalasi mudah hanya dengan memasang ke Handlebar End.
Colokan ujung Aluminium AlloyBar bermesin berkekuatan tinggi memberikan penahan yang kuat tanpa kerumitan pelindung tangan konvensional..
Pelindung dapat dilepas dan desain ZETAProtector lainnya dapat dipasang, memungkinkan Anda untuk menikmati gaya favorit Anda..
Dengan melonggarkan ArmBolt, sudut dapat disesuaikan secara vertikal dan horizontal tanpa langkah di sekitar Bar End..
Spacer khusus memungkinkan penyesuaian posisi dari CenterPosition sebesar 5 derajat per langkah, 4 langkah ke atas dan 4 langkah ke bawah, dengan total 9 langkah..
Mudah beradaptasi dengan Styling pilihan Anda.
Alur steker ujung batang memungkinkan penyesuaian 2 langkah dari posisi Lengan agar sesuai dengan kendaraan..
Mencegah body agar tidak jatuh dan juga berfungsi sebagai stopper untuk mencegah kerusakan pada throttle tube akibat terguling..
Pelindung buku jari terbuat dari resin PU yang lembut dan fleksibel.
Mengurangi benturan dari depan dan mencegah kerusakan pada GuardBody..
Tersedia dua pilihan desain dengan memasang dan melepaskan pelat depan dengan tanda logo cetak laser..
PolycarbonateProtector yang Dapat Dilepas sebagai Perlengkapan Standar.
ZETA XCPotectorSeries dapat diinstal.. Nikmati berbagai gaya.
[Pelindung yang Dapat Dipasang].
Pelindung ZETA X3
Pelindung ZETA X2
ZETA XCP Protector
ZETA XC-PROProtector
[Cara memilih penjaga SONICHand]
Tipe Universal ZS72-2000/ZE72-2100
Dapat dipasang pada kendaraan yang berlubang dengan melepas steker ujung batang.
kendaraan HONDA
Jika ada bulan setengah dengan berat bagian dalam berbentuk panggung di area pemasangan, dapat dipasang jika berat bagian dalam dilepas dan area tersebut berlubang..
mobil SUZUKI
Bobot bagian dalam dapat dilepas jika ada, atau dipasang jika berlubang..
M16/M8Tipe ZS72-2001/ZS72-2101
Lepaskan steker ujung Bar dan periksa bagian Ujung Stang..
kendaraan YAMAHA
Dapat dipasang ke setang dengan mesin ujung stang dengan M16 Pitch 1.5mm.
kendaraan KAWASAKI
Dapat dipasang pada setang dengan mur M8 yang dilas ke ujung stang. Polycarbonate protectors are standard.
Stylish handguard with bar-end-mounted handguard polycarbonate (PC) protector as standard equipment.
Polycarbonate (PC), which is resistant to impact, UV rays, low and high temperatures, has a versatile, simple and stylish design that can be used in any style of bike.
Not only does it increase wind resistance, it also has the function of mitigating impact from the front.
Installation is as simple as fixing it to the handlebar end.
While not requiring the complexity of a conventional handguard, it is firmly secured with a high-strength aluminum alloy bar-end plug made by machining.
The protector can be removed for use, or a ZETA protector of another design can be attached, allowing the user to enjoy their preferred styling.
■By loosening the arm bolts, the angle can be adjusted steplessly up and down on the axis of the bar end.
■The dedicated spacer allows position adjustment from the center position by 5 degrees per level, 4 levels up and 4 levels down, for a total of 9 levels.
Easily adapted to your preferred styling.
■The groove in the bar end plug allows the arm position to be adjusted to two positions.
It prevents the body from falling off and also functions as a stopper to prevent damage to the throttle tube due to tipping.
■Knuckle guards are made of soft and supple PU resin.
Mitigates impact from the front and prevents damage to the guard body.
■Two design options are available by attaching and detaching the front plate with laser-printed logo mark.
■Removable polycarbonate protectors are standard.
■ZETA XC Protector series can be attached.A wide range of styling can be enjoyed.
[Protector can be installed]
・ZETA X3 Protector
・ZETA X2 Protector
・ZETA XC Protector
・ZETA XC-PRO Protector
[How to choose a sonic handguard]
Universal type ZS72-2000 / ZE72-2100
It can be installed on bikes with bar end plugs removed and hollowed out.
●HONDA Bikes
If the mounting section has a half-moon stepped inner weight, it can be mounted if the inner weight is removed and the section is hollow.
●SUZUKI Bikes
Inner weights can be removed if present and attached if hollow.
[Representative Models]
CT125, GB350/S, CB400 SUPER FOUR, CB1100/RS/EX, CB1300 SUPER FOUR, V-STROM 250
Remove the bar end plugs and check the handlebar ends.
●YAMAHA Bikes
It can be installed on handlebars with handlebar ends machined with M16 pitch 1.5mm.
●KAWASAKI Bikes
It can be installed on handlebars with M8 nuts welded to the handlebar ends.
Pelindung tangan bergaya dengan pelindung tangan tipe sambungan ujung batangPolycarbonate (PC) Pelindung sebagai Perlengkapan Standar.
The Polycarbonate (PC) , yang tahan terhadap benturan, sinar ultraviolet, suhu rendah dan tinggi, adalah desain yang sederhana dan bergaya yang sangat universal dan dapat digunakan di semua jenis kendaraan..
Tidak hanya meningkatkan efek tahan angin, tetapi juga memiliki fungsi mengurangi benturan dari depan..
Instalasi mudah hanya dengan memasang ke Handlebar End.
Colokan ujung Aluminium AlloyBar bermesin berkekuatan tinggi memberikan penahan yang kuat tanpa kerumitan pelindung tangan konvensional..
Pelindung dapat dilepas dan desain ZETAProtector lainnya dapat dipasang, memungkinkan Anda untuk menikmati gaya favorit Anda..
Dengan melonggarkan ArmBolt, sudut dapat disesuaikan secara vertikal dan horizontal tanpa langkah di sekitar Bar End..
Spacer khusus memungkinkan penyesuaian posisi dari CenterPosition sebesar 5 derajat per langkah, 4 langkah ke atas dan 4 langkah ke bawah, dengan total 9 langkah..
Mudah beradaptasi dengan Styling pilihan Anda.
Alur steker ujung batang memungkinkan penyesuaian 2 langkah dari posisi Lengan agar sesuai dengan kendaraan..
Mencegah body agar tidak jatuh dan juga berfungsi sebagai stopper untuk mencegah kerusakan pada throttle tube akibat terguling..
Pelindung buku jari terbuat dari resin PU yang lembut dan fleksibel.
Mengurangi benturan dari depan dan mencegah kerusakan pada GuardBody..
Tersedia dua pilihan desain dengan memasang dan melepaskan pelat depan dengan tanda logo cetak laser..
PolycarbonateProtector yang Dapat Dilepas sebagai Perlengkapan Standar.
ZETA XCPotectorSeries dapat diinstal.. Nikmati berbagai gaya.
[Pelindung yang Dapat Dipasang].
Pelindung ZETA X3
Pelindung ZETA X2
ZETA XCP Protector
ZETA XC-PROProtector
[Cara memilih penjaga SONICHand]
Tipe Universal ZS72-2000/ZE72-2100
Dapat dipasang pada kendaraan yang berlubang dengan melepas steker ujung batang.
kendaraan HONDA
Jika ada bulan setengah dengan berat bagian dalam berbentuk panggung di area pemasangan, dapat dipasang jika berat bagian dalam dilepas dan area tersebut berlubang..
mobil SUZUKI
Bobot bagian dalam dapat dilepas jika ada, atau dipasang jika berlubang..
M16/M8Tipe ZS72-2001/ZS72-2101
Lepaskan steker ujung Bar dan periksa bagian Ujung Stang..
kendaraan YAMAHA
Dapat dipasang ke setang dengan mesin ujung stang dengan M16 Pitch 1.5mm.
kendaraan KAWASAKI
Dapat dipasang pada setang dengan mur M8 yang dilas ke ujung stang. Polycarbonate protectors are standard.
Stylish handguard with bar-end-mounted handguard polycarbonate (PC) protector as standard equipment.
Polycarbonate (PC), which is resistant to impact, UV rays, low and high temperatures, has a versatile, simple and stylish design that can be used in any style of bike.
Not only does it increase wind resistance, it also has the function of mitigating impact from the front.
Installation is as simple as fixing it to the handlebar end.
While not requiring the complexity of a conventional handguard, it is firmly secured with a high-strength aluminum alloy bar-end plug made by machining.
The protector can be removed for use, or a ZETA protector of another design can be attached, allowing the user to enjoy their preferred styling.
■By loosening the arm bolts, the angle can be adjusted steplessly up and down on the axis of the bar end.
■The dedicated spacer allows position adjustment from the center position by 5 degrees per level, 4 levels up and 4 levels down, for a total of 9 levels.
Easily adapted to your preferred styling.
■The groove in the bar end plug allows the arm position to be adjusted to two positions.
It prevents the body from falling off and also functions as a stopper to prevent damage to the throttle tube due to tipping.
■Knuckle guards are made of soft and supple PU resin.
Mitigates impact from the front and prevents damage to the guard body.
■Two design options are available by attaching and detaching the front plate with laser-printed logo mark.
■Removable polycarbonate protectors are standard.
■ZETA XC Protector series can be attached.A wide range of styling can be enjoyed.
[Protector can be installed]
・ZETA X3 Protector
・ZETA X2 Protector
・ZETA XC Protector
・ZETA XC-PRO Protector
[How to choose a sonic handguard]
Universal type ZS72-2000 / ZE72-2100
It can be installed on bikes with bar end plugs removed and hollowed out.
●HONDA Bikes
If the mounting section has a half-moon stepped inner weight, it can be mounted if the inner weight is removed and the section is hollow.
●SUZUKI Bikes
Inner weights can be removed if present and attached if hollow.
[Representative Models]
CT125, GB350/S, CB400 SUPER FOUR, CB1100/RS/EX, CB1300 SUPER FOUR, V-STROM 250
Remove the bar end plugs and check the handlebar ends.
●YAMAHA Bikes
It can be installed on handlebars with handlebar ends machined with M16 pitch 1.5mm.
●KAWASAKI Bikes
It can be installed on handlebars with M8 nuts welded to the handlebar ends.
Peringatan
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*Tidak dapat dipasang di CROSS CUB110 2018-2021 karena bersinggungan dengan parking lever.
*Lepas jalu stang.
*Motor dengan cowl dan windshield mungkin bersinggungan.
*Foto mungkin memuat tipe lainnya. *There may be changes in product specifications due to the manufacturer's reasons.
*CROSS CUB110 18-21 cannot be installed due to interference with the parking lever.
*bikes with bar end plugs removed and M6 nuts welded on cannot be installed.
*If the bike is equipped with a cowl or windshield, there is a possibility of interference.
*The image may contain other types.
*Tidak dapat dipasang di CROSS CUB110 2018-2021 karena bersinggungan dengan parking lever.
*Lepas jalu stang.
*Motor dengan cowl dan windshield mungkin bersinggungan.
*Foto mungkin memuat tipe lainnya. *There may be changes in product specifications due to the manufacturer's reasons.
*CROSS CUB110 18-21 cannot be installed due to interference with the parking lever.
*bikes with bar end plugs removed and M6 nuts welded on cannot be installed.
*If the bike is equipped with a cowl or windshield, there is a possibility of interference.
*The image may contain other types.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/