[TEKNOLOGI BEKU] Pelindung Kaki Leher Panjang yang Keren

  • Nomor produk: 25152210
    • IN STOCK
    • Out Stock

Rp405,000

*Termasuk PPN 11%

Webike Points: +4,050 Points

Alamat Pengiriman

  • Mohon tunggu...
to DKI Jakarta, Jakarta Selatan, Cilandak
UBAH
Pilih Alamat
Biaya pengiriman Rp10,000
Cek kupon saya

Jumlah

100% Ori Garansi 7 hr Gratis Cashback Nett Tanpa Biaya Tambahan

Rincian Produk

Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik Lihat versi asli

Spesifikasi:

Ukuran : Kira-kira. 48cm
Lebar : Kira-kira. 24 cm
Warna : Hitam

[Deskripsi]

By applying a cooling print to the contact-cooling fabric, the three cooling effects of vaporization heat, contact, and printing are demonstrated.
Ice Attack wear specially designed for extreme heat

Cooling neck gaiter with water absorption, quick-drying and breathability.
Not only does it keep the neck cool, but it can also be used in a variety of ways, including as a face mask, headband, or head cap, making it an ideal substitute for a mask during sports because it keeps heat out, allows for easy breathing, and is less sticky.
The UV-cut material prevents sunburn from ultraviolet rays, and the antibacterial and deodorant treatment allows comfortable wearing without worrying about odor even in the season when you tend to sweat.
For those who do not perspire easily, wet the garment and wring it out lightly to further enhance the cooling effect.

■Triple cooling technology
By applying a cooling print to the contact-cooling fabric, the three cooling effects of vaporization heat, contact, and printing are demonstrated.
Ice Attack wear specially designed to combat extreme heat

■Sweat and wind keep you cool
The entire lining is covered with a special "ice-cold print" containing erythritol and xylitol.
When this print-treated fabric absorbs moisture (sweat) generated from human skin, its heat-absorbing properties lower the temperature of the fabric, giving it a cooling sensation.
In addition, the wind can make the cold sensation even stronger.


≪QUALITY≫
■FREEZE TECH conducts various cold sensation comparison tests.
[Cooling performance]
FREEZE TECH fabrics react with water to lower temperature!
Test Contents:
A hot plate was set to 33 degrees Celsius (reproducing a pseudo skin surface temperature), on which a common contact-cooling fabric and a FreezeTech print fabric were placed, and the temperature change was photographed with a drop of water instead of sweat.
(From a thermographic coolness test conducted on October 31, 2016)

■ Compared to general contact cooling fabrics, Freeze-Tech print processed fabrics provide an additional -1.4 degree Celsius cooling sensation!
Test Contents:
A specimen folded in two is used as a test piece, and a temperature sensor is placed in the center of the folded inside.
In an atmosphere of approximately 34°C, approximately 0.2 ml of water is dropped onto the center of the specimen (above the sensor) and the temperature of the wetted area is measured for 10 minutes.
(From a cool-feeling performance evaluation of cool prints, conducted on January 7, 2016)

■Being exposed to the wind further enhances the cooling sensation!
Test Contents:
A heat environment was created (an artificial weather chamber (sub-chamber) with a constant temperature of 28°C and relative humidity of 60%) and reproduced by having two healthy male subjects perform the specified exercise on an aerobike for 20 minutes.
When airflow was applied 15 minutes after the start of the experiment, both the temperature in the garment and the relative humidity in the garment were noticeably lower than immediately before that.
(From the "Toward Zero Heat Stroke" Project Comparison Experiment Report (2019) between FREEZE TECH and summer innerwear for hot environments and exercise.)
*Results when wearing FREEZE TECH cold shirt long sleeve crew neck

[Washing durability performance]
■Even after repeated washing, the cold print performance is maintained!(as long as the print is adhered to the fabric)
Test Contents:
After the fabric was washed 50 times, the sample was folded in two and a temperature sensor was placed in the center of the folded inside as a test piece.
In an atmosphere of approximately 34°C, approximately 0.2 ml of water is dropped onto the center of the specimen (above the sensor) and the temperature of the wetted area is measured for 10 minutes.
(From a cool-feeling performance evaluation of cool prints, conducted on January 7, 2016)

Peringatan

*Warna mungkin tampak sedikit berbeda tergantung pada monitor yang menampilkannya.
*Mungkin ada perubahan spesifikasi produk karena alasan pabrikan.

PRODUK YANG JUGA DILIHAT

Produk Siap Dikirim dari Gudang Jepang

Rekomendasi buat Kamu

Best Seller

Produk Teratas

See all

New Custom Article

Lihat semua