- Beranda
- Sparepart Motor
- Sparepart Stang & Kemudi
- Sistem Kendali
- Dudukan / Klem Stang
- R&U PRODUCTS
- R&U PRODUCTS: [PRODUK R & U] R&U FLANDERSStyle Iron base riserJumlah: Set
[PRODUK R & U] R&U FLANDERSStyle Iron base riserJumlah: Set
- Nomor produk: RU10-0001
-
- IN STOCK
- Out Stock
- R&U PRODUCTS
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
R&U FLANDERSStyle IronBase RiserJumlah: Set
Pabrikan: R & U PRODUK
R&U FLANDERS style iron riser set
Pabrikan: R & U PRODUK
R&U FLANDERS style iron riser set
[Deskripsi]
R&UOriginal SteelRiser dirancang agar sesuai dengan Glide Riser dan Springer Top Tee dengan mengambil sampel bentuk bulat khas FLANDERS..
Tingginya sangat rendah 1-1/4 Inci (kira-kira. 32mm).
* Ini adalah ketinggian dari dudukan alas bawah ke bagian datar dari permukaan atas.
Pengukuran sebenarnya di Pusat Stang beberapa milimeter lebih tinggi..
Jumlah Riser: Ditetapkan untuk bahan yang terbuat dari pengecoran besi dan dihentikan dengan pemolesan. (* Mereka tidak dirawat dengan Chrome dan akan berkarat jika dibiarkan apa adanya.)
Gunakan sebagai dasar kustom untuk mengecatnya hitam, atau biarkan berkarat untuk mengubahnya menjadi karat hitam, atau sesuaikan panjangnya..
Permukaan kursi didesain dengan ukuran yang hampir sama dengan diameter SolidMount, yang sering digunakan dengan Glide Riser, sehingga SolidMount menghilang saat dipasang dan lebih pas dengan CERDAS.. (Ini mirip dengan Riser yang dibuat oleh Pauco.. )
Diameter jok kurang lebih 36.9mm, sehingga dapat digunakan dengan kombinasi Tee Top Springer tanpa telinga.. (Riser terkecil dari perusahaan lain R&U PRODUCTS dengan diameter kursi tidak dapat digunakan dalam kombinasi karena riser akan masuk ke dalam lubang di tee atas).
Baut riser yang akan dipasang 1/2-20 halus..
Kendaraan yang sudah menggunakan baut halus dapat menggunakannya tanpa modifikasi..
This is R&U's original steel riser, sampling the characteristic rounded shape of FLANDERS and designed to match with glide risers and springer top tees.
The height is a fairly low 1-1/4 inches (approx. 32mm).
*This is the height from the seat base at the bottom to the flat part of the top surface.
The measurement at the center of the actual handle would be a few more millimeters higher.
This is a riser set for materials created with iron casting and stopped at up to polishing.(*The product is not chrome-treated, so it will rust.)
Use it as a custom base for painting it black, daring it to rust and converting it to black rust, or adjusting its length.
The seat surface is designed to be approximately the same size as the diameter of the solid mounts commonly used on glide risers, which eliminates the presence of the solid mounts when installed and allows for a sleeker fit.(This is similar to the riser made by Pauco.)
The seat diameter is approximately 36.9mm, so it can be used in combination with Springer's earless top tees.(R&U PRODUCTS risers with a small seat diameter of other companies' products could not be used in combination because the risers would fit into the hole in the top tee.)
Compatible riser bolts are 1/2-20 fine.
bikes already using fine bolts can use them without modification.
Peringatan
* Baut pengencang atas tidak termasuk. (Gunakan ukuran baut 5/16-24x1" untuk bagian atas.)
*Jika Anda menggunakan 1/2-13 baut kasar, silakan beli 1/2-20 baut riser halus secara terpisah.
*Harap diperhatikan bahwa diameter kursi lebih besar dari desain terapung triple dan akan menjorok saat digunakan dengan triple 39mm mulai tahun 2004 dan seterusnya.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan. *Tightening bolts for the top are not included.(Use 5/16-24x1" bolt size for the top.)
*If you are using 1/2-13 coarse bolts, please purchase 1/2-20 fine riser bolts separately.
*The seat diameter is larger than the triple's floating design and will protrude when combined with a 39mm triple from 2004 onward.
*There may be changes in product specifications due to the manufacturer's reasons.
*Jika Anda menggunakan 1/2-13 baut kasar, silakan beli 1/2-20 baut riser halus secara terpisah.
*Harap diperhatikan bahwa diameter kursi lebih besar dari desain terapung triple dan akan menjorok saat digunakan dengan triple 39mm mulai tahun 2004 dan seterusnya.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan. *Tightening bolts for the top are not included.(Use 5/16-24x1" bolt size for the top.)
*If you are using 1/2-13 coarse bolts, please purchase 1/2-20 fine riser bolts separately.
*The seat diameter is larger than the triple's floating design and will protrude when combined with a 39mm triple from 2004 onward.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/