- Beranda
- Motor
- SUZUKI 126 - 250cc
- GSX250R
- Sparepart Motor
- Bodywork
- Plat Nomor
- A-TECH
- A-TECH: Pelat
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
untuk Race
for racing
[Deskripsi]
OEM Upper Cowl di atasnya.
This product is installed over the stock upper cowl.
Catatan
* Produk ini dibuat berdasarkan pesanan. Kami akan mengonfirmasi waktu pengiriman setelah pesanan diterima.t berbeda dengan aslinya.
* Setelah dipesan, produk ini tidak dapat dibatalkan, dikembalikan, atau ditukar.
Peringatan
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan.
* Gunakan dengan A-TECH Upper Cowl. * Bahan gambar: Karbon twilled
* Produk FRP dan karbon tidak dilapisi dengan jelas.
*Jika Anda ingin lapisan akhir yang jelas, silakan pilih "dengan lapisan bening" di [Selesai] dan tambahkan ke keranjang.
[Untuk produk FRP (putih/hitam)].
*Banyak produk kami dibuat dengan membagi cetakan produksi (cetakan yang diperlukan untuk membuat produk) , dan dalam proses manufaktur, gerinda resin tak terhindarkan terjadi di sepanjang garis pemisah cetakan produksi.
*Ketika pemrosesan sekunder dilakukan pada produk, langkah pemrosesan diperlukan untuk menghilangkan gerinda resin, dan karena proses ini, lapisan gel pada bagian yang diproses dapat dihilangkan pada saat yang bersamaan.
*Produk FRP memiliki tanda pemrosesan seperti itu, tetapi tidak ada masalah dalam penggunaan, dan produk tersebut tidak cacat karena dikembangkan dan dijual dengan asumsi bahwa produk tersebut dicat.
* Kami menghargai pengertian Anda dan menghargai pembelian Anda.
* Hal di atas tidak berlaku untuk produk FRP berlapis (PT) , produk karbon basah dan kering.
* Harap perhatikan sebelumnya bahwa pembatalan dan / atau pengembalian produk ini tidak dapat diterima setelah pesanan telah ditempatkan. *About FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*There may be changes in product specifications due to the manufacturer's reasons.
*Image is twill weave carbon.
*FRP and carbon products are not clear coated.
*If you wish to have clear coating finish, please select "with clear coating" in [Finish] and add it to the cart.
[For FRP (white/black) products]
*Many of our products are made by dividing production molds (molds necessary to produce products), and resin burrs inevitably occur along the dividing lines of production molds in the manufacturing process.
*When secondary processing is performed on a product, a processing step is required to remove resin burrs.
*FRP products have such processing marks, but there is no problem in use, and they are not defective.
*We appreciate your understanding in advance and appreciate your purchase.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
* Gunakan dengan A-TECH Upper Cowl. * Bahan gambar: Karbon twilled
* Produk FRP dan karbon tidak dilapisi dengan jelas.
*Jika Anda ingin lapisan akhir yang jelas, silakan pilih "dengan lapisan bening" di [Selesai] dan tambahkan ke keranjang.
[Untuk produk FRP (putih/hitam)].
*Banyak produk kami dibuat dengan membagi cetakan produksi (cetakan yang diperlukan untuk membuat produk) , dan dalam proses manufaktur, gerinda resin tak terhindarkan terjadi di sepanjang garis pemisah cetakan produksi.
*Ketika pemrosesan sekunder dilakukan pada produk, langkah pemrosesan diperlukan untuk menghilangkan gerinda resin, dan karena proses ini, lapisan gel pada bagian yang diproses dapat dihilangkan pada saat yang bersamaan.
*Produk FRP memiliki tanda pemrosesan seperti itu, tetapi tidak ada masalah dalam penggunaan, dan produk tersebut tidak cacat karena dikembangkan dan dijual dengan asumsi bahwa produk tersebut dicat.
* Kami menghargai pengertian Anda dan menghargai pembelian Anda.
* Hal di atas tidak berlaku untuk produk FRP berlapis (PT) , produk karbon basah dan kering.
* Harap perhatikan sebelumnya bahwa pembatalan dan / atau pengembalian produk ini tidak dapat diterima setelah pesanan telah ditempatkan. *About FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*There may be changes in product specifications due to the manufacturer's reasons.
*Image is twill weave carbon.
*FRP and carbon products are not clear coated.
*If you wish to have clear coating finish, please select "with clear coating" in [Finish] and add it to the cart.
[For FRP (white/black) products]
*Many of our products are made by dividing production molds (molds necessary to produce products), and resin burrs inevitably occur along the dividing lines of production molds in the manufacturing process.
*When secondary processing is performed on a product, a processing step is required to remove resin burrs.
*FRP products have such processing marks, but there is no problem in use, and they are not defective.
*We appreciate your understanding in advance and appreciate your purchase.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/