- Beranda
- Motor
- HONDA 0 - 50cc
- LIVE DIO-ZX
- Sparepart Motor
- Rantai / Gear
- Sparepart Skutik
- Pulley Skutik
- KN Planning
- KN Planning: Katrol Kecepatan Tinggi Kebesaran
Katrol Kecepatan Tinggi Kebesaran
- Nomor produk: KN-DHP-138-96
-
- IN STOCK
- Out Stock
- KN Planning
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Ukuran]
Sudut wajah: 13,8 derajat
M8:96mm
Pitch Sekrup Pemasangan Selang: 170g
[Spesifikasi]
Pulley Kecepatan TinggiX1
Pelat RampX1
Geser Piece3
Bos (37,5 mm) X1 [Size]
Face Angle: 13.8 degrees
Outer Diameter: 96mm
Weight: 170g
[Specifications]
High Speed Pulley X1
Ramp Plate x1
Slide piece X3
Boss (37.5mm) x 1
Sudut wajah: 13,8 derajat
M8:96mm
Pitch Sekrup Pemasangan Selang: 170g
[Spesifikasi]
Pulley Kecepatan TinggiX1
Pelat RampX1
Geser Piece3
Bos (37,5 mm) X1 [Size]
Face Angle: 13.8 degrees
Outer Diameter: 96mm
Weight: 170g
[Specifications]
High Speed Pulley X1
Ramp Plate x1
Slide piece X3
Boss (37.5mm) x 1
[Deskripsi]
Katrol Kecepatan Tinggi Kebesaran dibandingkan dengan katrol Normal..
Pelat belakangSekrup tidak ada lubang,Spesifikasi kering..
Panjang bos ZXOEM sekitar 36mm.
Terlampir bos Ukuran Panjang.. This is an oversized high speed pulley compared to the stock pulley.
Back plate without screw holes, dry type.
ZX stock boss length is around 36mm.
Attached boss will be long size.
Pelat belakangSekrup tidak ada lubang,Spesifikasi kering..
Panjang bos ZXOEM sekitar 36mm.
Terlampir bos Ukuran Panjang.. This is an oversized high speed pulley compared to the stock pulley.
Back plate without screw holes, dry type.
ZX stock boss length is around 36mm.
Attached boss will be long size.
Peringatan
* Tidak dapat dipasang di bak mesin! Pemotongan crankcase diperlukan karena mengganggu crankcase.
*Tidak ada peralatan seluler (gigi pinion starter) dapat digunakan karena mesin bak mesin diperlukan.
* Bak mesin perlu dikerjakan karena diameternya lebih besar dari stok.
*Tidak ada peralatan seluler (gigi pinion starter) dapat digunakan karena mesin bak mesin diperlukan.
*Panjang bos yang disertakan adalah 37.5mm. 1.5mm lebih panjang dari bos saham ZX. Pastikan untuk menyesuaikan panjangnya.
*Bos panjang yang disertakan dapat mengganggu kick gear karena perbedaan individual pada penutup bak mesin dan permukaan penggerak.
*Pengaturan terbaik tergantung pada kondisi kendaraan, berat pengendara dan suku cadang yang akan digabungkan. Pastikan untuk mengatur sistem sesuai dengan kendaraan Anda.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan. *Not available for pimping!Yes!!! Due to interference with the crankcase, machining of the case is required.
*Cell gear (starter pinion gear) cannot be used due to crankcase machining required.
*Machining of the crankcase is required due to the larger diameter than the stock crankcase.
*Cell gear (starter pinion gear) cannot be used due to crankcase machining required.
*The length of the attached boss is 37.5mm.1.5mm longer than ZX stock boss.Be sure to make adjustments.
*The long boss provided may interfere with the kick gear due to individual differences in the crankcase cover and drive face.
*The best setting depends on the condition of the bike, the rider's weight, and the parts to be combined.Be sure to make settings according to the current bike.
*There may be changes in product specifications due to the manufacturer's reasons.
*Tidak ada peralatan seluler (gigi pinion starter) dapat digunakan karena mesin bak mesin diperlukan.
* Bak mesin perlu dikerjakan karena diameternya lebih besar dari stok.
*Tidak ada peralatan seluler (gigi pinion starter) dapat digunakan karena mesin bak mesin diperlukan.
*Panjang bos yang disertakan adalah 37.5mm. 1.5mm lebih panjang dari bos saham ZX. Pastikan untuk menyesuaikan panjangnya.
*Bos panjang yang disertakan dapat mengganggu kick gear karena perbedaan individual pada penutup bak mesin dan permukaan penggerak.
*Pengaturan terbaik tergantung pada kondisi kendaraan, berat pengendara dan suku cadang yang akan digabungkan. Pastikan untuk mengatur sistem sesuai dengan kendaraan Anda.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan. *Not available for pimping!Yes!!! Due to interference with the crankcase, machining of the case is required.
*Cell gear (starter pinion gear) cannot be used due to crankcase machining required.
*Machining of the crankcase is required due to the larger diameter than the stock crankcase.
*Cell gear (starter pinion gear) cannot be used due to crankcase machining required.
*The length of the attached boss is 37.5mm.1.5mm longer than ZX stock boss.Be sure to make adjustments.
*The long boss provided may interfere with the kick gear due to individual differences in the crankcase cover and drive face.
*The best setting depends on the condition of the bike, the rider's weight, and the parts to be combined.Be sure to make settings according to the current bike.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/