- Beranda
- Motor
- YAMAHA 401 - 750cc
- TX650
- Sparepart Motor
- Bodywork
- Spakbor
- Spakbor Depan
- GOODS
- GOODS: Fender Depan Pekerjaan Pipa
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Finish cat hitam
[Ukuran]
Spatbor
panjangnya : Kira-kira. 410mm
Lebar : Kira-kira. 104mm
Diameter pipa : 15.9mm
Stabilisator
Tinggi total : Kira-kira. 160mm
Lebar keseluruhan antara garpu : Kira-kira. 130mm
Baut pitch untuk depan / Belakang : Kira-kira. 60mm
Diameter lubang baut : Kira-kira. 9mm
Lebar Bagian Dalam : 121mm
Sway bar saja : 710mm
Saat spatbor dipasang : 690mm
[Bahan]
Spatbor : FRP
Mengurung : Baja
[Komponen]
Spatbor x 1
Braket x 1 set
Batang bergoyang pipa x 1 ・Black paint finish
[Size]
Fender
Length: Approx. 410mm
Width: Approx. 104mm
Pipe diameter: Φ15.9mm
Stabilizer
Total height: Approx. 160mm
Overall width between forks: Approx. 130mm
Bolt pitch for front / rear: Approx. 60mm
Bolt hole Diameter: Approx. 9mm
Inner width: 121mm
Sway bar only: 710mm
When fenders are mounted: 690mm
[Material]
Fender: FRP
Bracket: Steel
[Components]
Fender x 1
Bracket x 1 set
Pipework sway bar x 1
[Ukuran]
Spatbor
panjangnya : Kira-kira. 410mm
Lebar : Kira-kira. 104mm
Diameter pipa : 15.9mm
Stabilisator
Tinggi total : Kira-kira. 160mm
Lebar keseluruhan antara garpu : Kira-kira. 130mm
Baut pitch untuk depan / Belakang : Kira-kira. 60mm
Diameter lubang baut : Kira-kira. 9mm
Lebar Bagian Dalam : 121mm
Sway bar saja : 710mm
Saat spatbor dipasang : 690mm
[Bahan]
Spatbor : FRP
Mengurung : Baja
[Komponen]
Spatbor x 1
Braket x 1 set
Batang bergoyang pipa x 1 ・Black paint finish
[Size]
Fender
Length: Approx. 410mm
Width: Approx. 104mm
Pipe diameter: Φ15.9mm
Stabilizer
Total height: Approx. 160mm
Overall width between forks: Approx. 130mm
Bolt pitch for front / rear: Approx. 60mm
Bolt hole Diameter: Approx. 9mm
Inner width: 121mm
Sway bar only: 710mm
When fenders are mounted: 690mm
[Material]
Fender: FRP
Bracket: Steel
[Components]
Fender x 1
Bracket x 1 set
Pipework sway bar x 1
[Deskripsi]
[Tidak pernah ketinggalan zaman![Fender depan asli BARANG]
Fender depan yang dibaut.
Posisi pemasangan dapat dinaikkan atau diturunkan, dan ban dengan ketinggian tinggi seperti Firestone dapat dipasang.
Ini juga memiliki efek meningkatkan kekakuan bagian depan oleh braket yang juga berfungsi sebagai stabilizer.
[FIRESTONE dan banyak lagi!]
Sampai sekarang, sulit untuk memasang fender dengan ban tinggi, tetapi fender pipa kami dapat dipasang tanpa masalah! Memasang fender yang tidak dapat dipasang sampai sekarang.
Ini solusinya!
[Dirancang untuk tidak mengalihkan perhatian dari gaya!]
Ini dirancang sesederhana mungkin dan menyatu dengan bodi kendaraan sehingga dapat dipasang pada chopper dan model bobber tanpa ketidaknyamanan.
Seperti yang Anda lihat dari gambar pemasangan setiap model, sangat cocok dengan gaya apa pun
[Ini juga berfungsi ganda sebagai stabilizer untuk meningkatkan kekakuan depan!]
Produk ini akan memecahkan masalah kekakuan depan yang hilang oleh eliminator fender! BARANG mencoba membuat "kustomisasi penuh untuk berkendara" terjadi! [Never out of style![GOODS original front fender]
Bolt-on front fenders.
The mounting position can be raised or lowered, and tires with high height such as Firestone can be mounted.
It also has the effect of increasing the rigidity of the front by the bracket that also serves as a stabilizer.
[FIRESTONE and more!]
Up until now, it has been difficult to install fenders with high height tires, but the GOODS Pipework fenders can be installed without any problems!Mounting the fender that could't be installed on up until now.
This is the solution!
[Designed not to distract from style!]
It is designed to be as simple as possible and to blend in with the body of the vehicle so that it can be installed on choppers and bobber styles without any discomfort.
As you can see from the installation images of each model, it fits perfectly with any style
[It also doubles as a stabilizer to increase front rigidity!]
This product will solve the problem of the front rigidity lost by the fender eliminator!GOODS is trying to make "full customization for riding" happen!
Fender depan yang dibaut.
Posisi pemasangan dapat dinaikkan atau diturunkan, dan ban dengan ketinggian tinggi seperti Firestone dapat dipasang.
Ini juga memiliki efek meningkatkan kekakuan bagian depan oleh braket yang juga berfungsi sebagai stabilizer.
[FIRESTONE dan banyak lagi!]
Sampai sekarang, sulit untuk memasang fender dengan ban tinggi, tetapi fender pipa kami dapat dipasang tanpa masalah! Memasang fender yang tidak dapat dipasang sampai sekarang.
Ini solusinya!
[Dirancang untuk tidak mengalihkan perhatian dari gaya!]
Ini dirancang sesederhana mungkin dan menyatu dengan bodi kendaraan sehingga dapat dipasang pada chopper dan model bobber tanpa ketidaknyamanan.
Seperti yang Anda lihat dari gambar pemasangan setiap model, sangat cocok dengan gaya apa pun
[Ini juga berfungsi ganda sebagai stabilizer untuk meningkatkan kekakuan depan!]
Produk ini akan memecahkan masalah kekakuan depan yang hilang oleh eliminator fender! BARANG mencoba membuat "kustomisasi penuh untuk berkendara" terjadi! [Never out of style![GOODS original front fender]
Bolt-on front fenders.
The mounting position can be raised or lowered, and tires with high height such as Firestone can be mounted.
It also has the effect of increasing the rigidity of the front by the bracket that also serves as a stabilizer.
[FIRESTONE and more!]
Up until now, it has been difficult to install fenders with high height tires, but the GOODS Pipework fenders can be installed without any problems!Mounting the fender that could't be installed on up until now.
This is the solution!
[Designed not to distract from style!]
It is designed to be as simple as possible and to blend in with the body of the vehicle so that it can be installed on choppers and bobber styles without any discomfort.
As you can see from the installation images of each model, it fits perfectly with any style
[It also doubles as a stabilizer to increase front rigidity!]
This product will solve the problem of the front rigidity lost by the fender eliminator!GOODS is trying to make "full customization for riding" happen!
Peringatan
* Garpu 73-76 TX650, sebelumnya XS1, XS650 (E) , dll. berbeda dan instalasi belum dikonfirmasi.
*Jika lebar ban melebihi 108mm, baut stabilizer harus dipasang setelah ban dipasang.
* Roda depan harus dilepas saat memasang.
*Ban FIRESTONE dipastikan tersedia dalam ukuran 4.00.
*Jika jenis atau ukuran ban terlalu besar, mungkin tidak dapat dipasang.
*Kaliper dipasang pada posisi yang sedikit lebih tinggi karena ketinggian area pemasangan kaliper pada model SR3 dan yang lebih baru. Jika dicocokkan dengan ban ukuran standar, akan ada sedikit celah seperti yang ditunjukkan pada gambar.
*Mungkin ada perubahan spesifikasi produk karena alasan pabrikan. *The forks of 73-76 TX650, earlier XS1, XS650 (E), etc. are different and the installation has not been confirmed.
*If the tire width exceeds 108mm, the stabilizer bolts must be installed after the tire is mounted.
*It is necessary to remove the front wheel when installing.
*FIRESTONE tires are confirmed to be available in 4.00 size.
*If the tire type or size is too large, it may not be able to be mounted.
*The calipers are fixed at a slightly higher position due to the height of the caliper mounting area on SR3 and later models.When matched with stock size tires, there will be a slight gap as shown in the image.
*There may be changes in product specifications due to the manufacturer's reasons.
*Jika lebar ban melebihi 108mm, baut stabilizer harus dipasang setelah ban dipasang.
* Roda depan harus dilepas saat memasang.
*Ban FIRESTONE dipastikan tersedia dalam ukuran 4.00.
*Jika jenis atau ukuran ban terlalu besar, mungkin tidak dapat dipasang.
*Kaliper dipasang pada posisi yang sedikit lebih tinggi karena ketinggian area pemasangan kaliper pada model SR3 dan yang lebih baru. Jika dicocokkan dengan ban ukuran standar, akan ada sedikit celah seperti yang ditunjukkan pada gambar.
*Mungkin ada perubahan spesifikasi produk karena alasan pabrikan. *The forks of 73-76 TX650, earlier XS1, XS650 (E), etc. are different and the installation has not been confirmed.
*If the tire width exceeds 108mm, the stabilizer bolts must be installed after the tire is mounted.
*It is necessary to remove the front wheel when installing.
*FIRESTONE tires are confirmed to be available in 4.00 size.
*If the tire type or size is too large, it may not be able to be mounted.
*The calipers are fixed at a slightly higher position due to the height of the caliper mounting area on SR3 and later models.When matched with stock size tires, there will be a slight gap as shown in the image.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/