- Beranda
- Motor
- HONDA 126 - 250cc
- CBR250RR (2016-)
- Sparepart Motor
- Sparepart Mesin
- Mesin
- Tutup Kruk As
- SAITANIYA
- SAITANIYA: Tipe Pelindung Mesin-eco
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
CBR250RR 90-
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Warna] Gel Hitam
[Bahan] Potongan karbon [Color] Black gel
[Material] Carbon scrap
[Bahan] Potongan karbon [Color] Black gel
[Material] Carbon scrap
[Deskripsi]
Kami memproduksi produk kami menggunakan "bahan bekas" yang pasti diproduksi dalam pembuatan produk karbon.
Terbatas hingga 10 set karena bahan terbatas.
Kami akan meningkatkan produksi segera setelah bahan tersedia.
Sisi belakang juga dibentuk dengan metode pengepresan dingin dan melekat dengan kuat.
Ini adalah jenis yang dikencangkan bersama dengan penutup kotak stok (penutup generator). We manufacture our products using "scrap materials" that are inevitably produced in the manufacture of carbon products.
Limited to 10 sets due to limited materials.
We will increase production as soon as materials are available.
The back side is also shaped by the cold-pressing method and adheres firmly.
It is a type that tightens together with the stock case cover (generator cover).
Terbatas hingga 10 set karena bahan terbatas.
Kami akan meningkatkan produksi segera setelah bahan tersedia.
Sisi belakang juga dibentuk dengan metode pengepresan dingin dan melekat dengan kuat.
Ini adalah jenis yang dikencangkan bersama dengan penutup kotak stok (penutup generator). We manufacture our products using "scrap materials" that are inevitably produced in the manufacture of carbon products.
Limited to 10 sets due to limited materials.
We will increase production as soon as materials are available.
The back side is also shaped by the cold-pressing method and adheres firmly.
It is a type that tightens together with the stock case cover (generator cover).
Catatan
* Setelah dipesan, produk ini tidak dapat dibatalkan, dikembalikan, atau ditukar.
Peringatan
*Jika casing dicat, mungkin tidak dapat dipasang karena ketebalan lapisan cat.
*Penutup sekunder itu sendiri memiliki ketebalan sekitar 1,5-2,0mm, jadi sekrup harus dimasukkan ke dalam lubang yang melewati sisi penutup sekunder.
Lubang itu sendiri dibor dengan tangan, jadi mungkin ada kasus di mana sekrup sulit dimasukkan karena kesalahan produk. Dalam hal ini, gunakan file stik untuk melepas sedikit.
*Tergantung pada tingkat keparahan kecelakaan, pelindung mesin mungkin tidak dapat melindungi Anda.
* Penyesuaian mungkin diperlukan untuk pemasangan pada kendaraan yang lebih tua.
*Cetakan produksi dibuat pada tahun produksi kendaraan, dan ada transfer goresan.
*Karena menjadi produk premis lukisan, barang dengan pengalihan goresan tidak sesuai dengan klaim dan pengembalian.
*Mungkin ada perubahan spesifikasi produk karena alasan pabrikan.
* Gambar mungkin berisi produk lain.
* Harap perhatikan sebelumnya bahwa pembatalan dan / atau pengembalian produk ini tidak dapat diterima setelah pesanan telah ditempatkan. *FRP products and carbon products are unpainted products.
*FRP (black gel) is buffed and shiny and can be used as it is, but it is a product to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*If the case is painted, it may not be possible to install due to the thickness of the paint film.
*The secondary cover itself is about 1.5-2.0mm thick, so the screws must be inserted into the holes just past the sides of the secondary cover.
The holes themselves are drilled by hand, so there may be cases where screws are difficult to insert due to product errors.In this case, please use a stick file to remove a little.
*Depending on the severity of the accident, the engine protector may not be able to protect you.
*Adjustment may be required for installation on older vehicles.
*THe production mold was made at vehicle's produce year, and there is a transfer of scratches.
*Because it becomes the product of the premise of the painting, the thing by the transfer of the scratch does not correspond to the claim and the return.
*There may be changes in product specifications due to the manufacturer's reasons.
*The image may contain other products.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
*Penutup sekunder itu sendiri memiliki ketebalan sekitar 1,5-2,0mm, jadi sekrup harus dimasukkan ke dalam lubang yang melewati sisi penutup sekunder.
Lubang itu sendiri dibor dengan tangan, jadi mungkin ada kasus di mana sekrup sulit dimasukkan karena kesalahan produk. Dalam hal ini, gunakan file stik untuk melepas sedikit.
*Tergantung pada tingkat keparahan kecelakaan, pelindung mesin mungkin tidak dapat melindungi Anda.
* Penyesuaian mungkin diperlukan untuk pemasangan pada kendaraan yang lebih tua.
*Cetakan produksi dibuat pada tahun produksi kendaraan, dan ada transfer goresan.
*Karena menjadi produk premis lukisan, barang dengan pengalihan goresan tidak sesuai dengan klaim dan pengembalian.
*Mungkin ada perubahan spesifikasi produk karena alasan pabrikan.
* Gambar mungkin berisi produk lain.
* Harap perhatikan sebelumnya bahwa pembatalan dan / atau pengembalian produk ini tidak dapat diterima setelah pesanan telah ditempatkan. *FRP products and carbon products are unpainted products.
*FRP (black gel) is buffed and shiny and can be used as it is, but it is a product to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*If the case is painted, it may not be possible to install due to the thickness of the paint film.
*The secondary cover itself is about 1.5-2.0mm thick, so the screws must be inserted into the holes just past the sides of the secondary cover.
The holes themselves are drilled by hand, so there may be cases where screws are difficult to insert due to product errors.In this case, please use a stick file to remove a little.
*Depending on the severity of the accident, the engine protector may not be able to protect you.
*Adjustment may be required for installation on older vehicles.
*THe production mold was made at vehicle's produce year, and there is a transfer of scratches.
*Because it becomes the product of the premise of the painting, the thing by the transfer of the scratch does not correspond to the claim and the return.
*There may be changes in product specifications due to the manufacturer's reasons.
*The image may contain other products.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
Model yang Sesuai
CBR250RR 90-
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/