- Beranda
- Motor
- KAWASAKI 751 - 1000cc
- Z1-R / Z1-RII
- Sparepart Motor
- Bodywork
- Jok & Aksesoris
- Plat Jok
- Class4 Engineering
- Class4 Engineering: Dasar kursi ramping
Dasar kursi ramping
- Nomor produk: W-1383-P37133762
-
- IN STOCK
- Out Stock
- Class4 Engineering
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
[Deskripsi]
SeatBase Z1R Slim kini tersedia dalam Carbon..
Z1R dikatakan memiliki footprint terburuk di ZSeries.
Jika kursi ramping ini dibuat menjadi kursi dengan alas, pijakannya akan sangat meningkat..
Dalam hal ini, harap sesuaikan ketinggian dan sudut engsel kursi (dalam kasus Mk2) atau ketinggian braket pemasangan dan pengait..
1. Coba letakkan kursi Slim di tempat Anda melepas kursi Normal.. Jika kita bisa mendapatkannya di sana tanpa masalah.
2. Pasang SeatFitting ke depan dan belakang Frame Bracket untuk bukaan samping.. Pada saat ini, longgarkan baut pemasangan dan pasang sementara.. begitu
→ Jika tidak menutup dengan benar, atau jika terangkat, atau jika penutup ekor terlalu keras, Anda mungkin perlu menyesuaikan ketinggian pemasangan ..
→ Jika penginstalan berhasil, ubah ke 3 ..
3. Pasang bantalan karet di belakang jok.. begitu
→Jika Anda menemukan masalah seperti Kursi terdistorsi atau terangkat setelah duduk, Anda perlu menyesuaikan bantalan Karet.. Anda perlu menyesuaikan ketinggian dan seterusnya untuk mencapai rata-rata.
→ Jika tidak masalah, itu saja !.
•katalisator (Katalis Pemurnian Emisi).
Braket sisi terbalik dan karet dapat digunakan dengan porting.. The Z1R slim seat base is available in carbon.
The Z1R is said to have the worst footprint in the Z series.
If a seat is fabricated using this slim seat as a base, the footing will be greatly improved.
In this case, please adjust the height and angle of the seat hinge (in the case of Mk2), or adjust the height of the mounting bracket and hook.
1. Place the slim seat on the place where the stock seat was removed.If I can get it on without a problem
2. Attach the seat fitting to the front and back of the frame bracket for the horizontal opening.At this time, loosen the fitting mounting bolts and leave them temporarily installed.therefore
If there is a problem such as it doesn't close properly, it lifts up and closes, or it hits the tail cowl tightly, you need to adjust the height of the fitting.
If the installation is successful, go to step 3.
3. Install the rubber cushion on the back of the seat.therefore
If the seat is distorted or lifted, the rubber cushion needs to be adjusted.It is necessary to adjust the height so that it hits on average.
If there is no problem, you are done.
The brackets and rubbers on the back side can be ported for use.
Z1R dikatakan memiliki footprint terburuk di ZSeries.
Jika kursi ramping ini dibuat menjadi kursi dengan alas, pijakannya akan sangat meningkat..
Dalam hal ini, harap sesuaikan ketinggian dan sudut engsel kursi (dalam kasus Mk2) atau ketinggian braket pemasangan dan pengait..
1. Coba letakkan kursi Slim di tempat Anda melepas kursi Normal.. Jika kita bisa mendapatkannya di sana tanpa masalah.
2. Pasang SeatFitting ke depan dan belakang Frame Bracket untuk bukaan samping.. Pada saat ini, longgarkan baut pemasangan dan pasang sementara.. begitu
→ Jika tidak menutup dengan benar, atau jika terangkat, atau jika penutup ekor terlalu keras, Anda mungkin perlu menyesuaikan ketinggian pemasangan ..
→ Jika penginstalan berhasil, ubah ke 3 ..
3. Pasang bantalan karet di belakang jok.. begitu
→Jika Anda menemukan masalah seperti Kursi terdistorsi atau terangkat setelah duduk, Anda perlu menyesuaikan bantalan Karet.. Anda perlu menyesuaikan ketinggian dan seterusnya untuk mencapai rata-rata.
→ Jika tidak masalah, itu saja !.
•katalisator (Katalis Pemurnian Emisi).
Braket sisi terbalik dan karet dapat digunakan dengan porting.. The Z1R slim seat base is available in carbon.
The Z1R is said to have the worst footprint in the Z series.
If a seat is fabricated using this slim seat as a base, the footing will be greatly improved.
In this case, please adjust the height and angle of the seat hinge (in the case of Mk2), or adjust the height of the mounting bracket and hook.
1. Place the slim seat on the place where the stock seat was removed.If I can get it on without a problem
2. Attach the seat fitting to the front and back of the frame bracket for the horizontal opening.At this time, loosen the fitting mounting bolts and leave them temporarily installed.therefore
If there is a problem such as it doesn't close properly, it lifts up and closes, or it hits the tail cowl tightly, you need to adjust the height of the fitting.
If the installation is successful, go to step 3.
3. Install the rubber cushion on the back of the seat.therefore
If the seat is distorted or lifted, the rubber cushion needs to be adjusted.It is necessary to adjust the height so that it hits on average.
If there is no problem, you are done.
The brackets and rubbers on the back side can be ported for use.
Catatan
* Produk ini dibuat berdasarkan pesanan. Kami akan mengonfirmasi waktu pengiriman setelah pesanan diterima.t berbeda dengan aslinya.
Peringatan
*Harap diperhatikan bahwa beberapa penyesuaian, seperti penyesuaian ketinggian kursi, mungkin diperlukan saat memasang kursi. Harap dipahami bahwa kursi FRP atau serat karbon mungkin tidak pas meskipun kursi tersebut sesuai dengan kursi standar. Dalam kebanyakan kasus, kursi dapat dipasang tanpa masalah setelah penyesuaian.
*Kursi mungkin melengkung atau celah antara penutup ekor dan badan mungkin terlalu rapat.
* Setiap item adalah buatan tangan, jadi mungkin perlu beberapa waktu untuk dikirim. Terima kasih atas pengertian Anda.
*Jika kursi tidak cukup panjang, mungkin ada yang salah dengan sisi bodinya.
*Kursi custom-made mungkin tidak muat karena body error.
* Berisi jenis lain di foto.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan. *Adjustments such as seat-finishing height adjustment may be necessary when installing the product.Please understand that FRP and carbon sheets may not fit well as they are, even if your previous stock fits.In most cases, the installation can be done without problems by adjustment.
*Please note that this product is handmade one by one, so it will take some time for delivery.
*The seat may warp or the gap between the tail cowl and the body may be too tight when the Mk2 / Z1R is just installed due to the compatibility with the body.
*If the seat is not long enough, there may be something wrong with that bike.
*Custom-made seats may not fit due to bike body error.
*Images may contain other types.
*There may be changes in product specifications due to the manufacturer's reasons.
*Kursi mungkin melengkung atau celah antara penutup ekor dan badan mungkin terlalu rapat.
* Setiap item adalah buatan tangan, jadi mungkin perlu beberapa waktu untuk dikirim. Terima kasih atas pengertian Anda.
*Jika kursi tidak cukup panjang, mungkin ada yang salah dengan sisi bodinya.
*Kursi custom-made mungkin tidak muat karena body error.
* Berisi jenis lain di foto.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan. *Adjustments such as seat-finishing height adjustment may be necessary when installing the product.Please understand that FRP and carbon sheets may not fit well as they are, even if your previous stock fits.In most cases, the installation can be done without problems by adjustment.
*Please note that this product is handmade one by one, so it will take some time for delivery.
*The seat may warp or the gap between the tail cowl and the body may be too tight when the Mk2 / Z1R is just installed due to the compatibility with the body.
*If the seat is not long enough, there may be something wrong with that bike.
*Custom-made seats may not fit due to bike body error.
*Images may contain other types.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/