- Beranda
- Motor
- HONDA 51 - 125cc
- DAX125
- Sparepart Motor
- Suspensi / Rearset / Velg / Swingarm
- Sparepart Velg
- As Roda
- KOOD
- KOOD: Poros Gandar Depan
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Bahan] Chromoly Steel (3 lapisan pelapisan selesai)
[Material] Chromoly steel (3-layer plating finish)
Without plating nut
Without plating nut
[Deskripsi]
KOOD adalah merek yang bertujuan untuk menghasilkan suku cadang kustom berkualitas tinggi dan berkinerja tinggi dengan tetap berpegang pada "Made in Japan" dari pemilihan bahan hingga produksi, dan melalui proses yang tidak memungkinkan kompromi dalam proses produksi.
Produk baru yang ditunggu-tunggu dirilis satu demi satu di "Poros Gandar Chromoly KOOD" yang sangat populer sejak dirilis!!!
Dengan meningkatkan kekuatan poros itu sendiri dan kekakuan sambungan antara sisi kiri dan kanan tubuh, gerakan garpu depan dan lengan ayun dapat dirasakan lebih langsung dan informasi dari permukaan jalan dapat ditransmisikan lebih tajam, sangat meningkatkan kualitas berkendara!!!
Dari sepeda mini hingga sepeda besar, Anda dapat merasakan perbedaannya hanya dengan mengganti poros bawaan.
Performanya benar-benar dijuluki "tongkat ajaib"!!!
Kualitas tinggi Made in JAPAN dan daya tahan tinggi dari proses pelapisan tiga lapis asli adalah produk unggulan yang dapat direkomendasikan ke berbagai pelanggan.
Kinerja sensorik langsung!!!! Untuk kendaraan kesayangan anda juga!!!
Bahan baku
Baja yang digunakan dalam pembuatan dibeli dari pabrikan Jepang dengan lembaran pabrik (Sertifikat pemeriksaan baja) yang menjamin kualitas yang dapat diandalkan.
Perlakuan panas diterapkan sebelum diproses.
Mesin bubut NC, Pemesinan, Gerinda tanpa pusat
Itu dibentuk dengan menggunakan berbagai proses.
Tiga lapis pelapisan
Produk KOOD diperlakukan dengan 3 lapisan pelapisan.
Proses pelapisan dengan banyak lapisan ini tidak umum digunakan, tetapi pelapisan 3 lapis diadopsi untuk meningkatkan kualitas pencegahan karat dan daya tahan. KOOD is a brand that aims to produce high quality and high performance custom parts by sticking to "Made in Japan" from the selection of materials to the production, and through the process that does not allow any compromise in the production process.
By increasing the strength of the shaft itself and the rigidity of the connection between the left and right side of the body, the movement of the front fork and swingarm can be felt more directly and the information from the road surface can be transmitted more sharply, greatly improving the ride quality!!!
From mini bikes to big bikes, you can feel the difference by simply replacing the stock shaft.
Its performance is truly nicknamed the "magic stick"!!!
The high quality of Made in JAPAN and the high durability of the original three-layer plating process are excellent products that can be recommended to various customers.
Immediate sensory performance!!!! For your beloved vehicle too!!!
■Material
The steel used in manufacturing is purchased from Japanese manufacturers with a mill sheet (steel inspection certificate) that guarantees reliable quality.
Heat treatment is applied before processing.
■NC lathe, machining, centerless grinding
It is formed by using various processes.
■Plating process over 3 layers
KOOD products are treated with 3 layers of plating.
The plating process with this many layers is not commonly used, but the 3-layer plating is adopted to improve the quality of rust prevention and durability.
Produk baru yang ditunggu-tunggu dirilis satu demi satu di "Poros Gandar Chromoly KOOD" yang sangat populer sejak dirilis!!!
Dengan meningkatkan kekuatan poros itu sendiri dan kekakuan sambungan antara sisi kiri dan kanan tubuh, gerakan garpu depan dan lengan ayun dapat dirasakan lebih langsung dan informasi dari permukaan jalan dapat ditransmisikan lebih tajam, sangat meningkatkan kualitas berkendara!!!
Dari sepeda mini hingga sepeda besar, Anda dapat merasakan perbedaannya hanya dengan mengganti poros bawaan.
Performanya benar-benar dijuluki "tongkat ajaib"!!!
Kualitas tinggi Made in JAPAN dan daya tahan tinggi dari proses pelapisan tiga lapis asli adalah produk unggulan yang dapat direkomendasikan ke berbagai pelanggan.
Kinerja sensorik langsung!!!! Untuk kendaraan kesayangan anda juga!!!
Bahan baku
Baja yang digunakan dalam pembuatan dibeli dari pabrikan Jepang dengan lembaran pabrik (Sertifikat pemeriksaan baja) yang menjamin kualitas yang dapat diandalkan.
Perlakuan panas diterapkan sebelum diproses.
Mesin bubut NC, Pemesinan, Gerinda tanpa pusat
Itu dibentuk dengan menggunakan berbagai proses.
Tiga lapis pelapisan
Produk KOOD diperlakukan dengan 3 lapisan pelapisan.
Proses pelapisan dengan banyak lapisan ini tidak umum digunakan, tetapi pelapisan 3 lapis diadopsi untuk meningkatkan kualitas pencegahan karat dan daya tahan. KOOD is a brand that aims to produce high quality and high performance custom parts by sticking to "Made in Japan" from the selection of materials to the production, and through the process that does not allow any compromise in the production process.
By increasing the strength of the shaft itself and the rigidity of the connection between the left and right side of the body, the movement of the front fork and swingarm can be felt more directly and the information from the road surface can be transmitted more sharply, greatly improving the ride quality!!!
From mini bikes to big bikes, you can feel the difference by simply replacing the stock shaft.
Its performance is truly nicknamed the "magic stick"!!!
The high quality of Made in JAPAN and the high durability of the original three-layer plating process are excellent products that can be recommended to various customers.
Immediate sensory performance!!!! For your beloved vehicle too!!!
■Material
The steel used in manufacturing is purchased from Japanese manufacturers with a mill sheet (steel inspection certificate) that guarantees reliable quality.
Heat treatment is applied before processing.
■NC lathe, machining, centerless grinding
It is formed by using various processes.
■Plating process over 3 layers
KOOD products are treated with 3 layers of plating.
The plating process with this many layers is not commonly used, but the 3-layer plating is adopted to improve the quality of rust prevention and durability.
Catatan
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
[Tentang Instalasi]
* Poros gandar adalah bagian penting.
Pemasangan harus dilakukan oleh personel yang berkualifikasi di toko profesional.
Silakan gunakan alat yang sesuai untuk bentuk kepala poros.
Jika poros dikencangkan dengan alat yang tidak tepat, lapisan film pada permukaan poros akan tergores dan menyebabkan karat.
Sebelum pemasangan, oleskan gemuk atau oli lain ke permukaan poros.
Permukaan poros diperlakukan dengan "3-layer plating film" asli KOOD, sehingga karat tidak akan terjadi pada poros itu sendiri dalam penggunaan normal. Tujuannya adalah untuk mencegah perpindahan karat dari bantalan roda, dll., yang disebabkan oleh beda potensial logam.
Harap perhatikan torsi pengencangan yang ditentukan oleh pabrikan.
Jika kendaraan dipasang menggunakan mur stok, periksa murnya.
Jika mur rusak karena terguling, dll., atau jika bagian self-locking aus, pastikan untuk menggunakan mur baru. Hal ini untuk mencegah kerusakan pada ulir poros.
[Tentang kualitas produk]
KOOD telah mengambil semua langkah yang mungkin untuk mengelola produksi. Namun, jika ada masalah, harap hubungi KOOD sebelum bekerja.
*Dalam hal apa pun KOOD tidak akan menerima klaim atau pengembalian apa pun setelah pemasangan (seperti memasukkan poros ke dalam roda).
Tentang karat
Poros KOOD diperlakukan dengan "film pelapis 3 lapis".
Ini diproses dengan film yang lebih kuat dari film pelapis biasa. Karat dapat terjadi tergantung pada kondisi penggunaan, tetapi tidak ada masalah dengan kualitasnya.
Transfer karat : Karat dari luar masuk ke permukaan berlapis
Kerusakan pada film pelapis... Penggunaan alat yang tidak tepat, batu terbang saat berkendara, jatuh, dll.
[Peringatan]
Dalam kasus poros KOOD dengan mur berlapis, sering terjadi kerusakan pada ulir selama pemasangan.
Karena sifat pelapisan, hal ini sering terlihat saat bagian berlapis (mis. Poros KOOD dan mur KOOD) saling bertautan atau bila bagian berulir tidak berminyak.
Harap gunakan gemuk anti korosif seperti kompon sledge pada bagian sekrup saat Anda memasangnya.
*Mungkin ada perubahan spesifikasi produk karena alasan pabrikan. *There may be changes in product specifications due to the manufacturer's reasons.
*Even if the vehicle is compatible, it will not fit if the front forks are not stock or if the vehicle has been customized.
[About the installation]
*Axle shafts are critical parts.
Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".
It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
・Transferred rust: Rust from the outside gets on the plated surface
・Damage to the plating film... Improper use of tools, flying rocks during riding, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.
* Poros gandar adalah bagian penting.
Pemasangan harus dilakukan oleh personel yang berkualifikasi di toko profesional.
Silakan gunakan alat yang sesuai untuk bentuk kepala poros.
Jika poros dikencangkan dengan alat yang tidak tepat, lapisan film pada permukaan poros akan tergores dan menyebabkan karat.
Sebelum pemasangan, oleskan gemuk atau oli lain ke permukaan poros.
Permukaan poros diperlakukan dengan "3-layer plating film" asli KOOD, sehingga karat tidak akan terjadi pada poros itu sendiri dalam penggunaan normal. Tujuannya adalah untuk mencegah perpindahan karat dari bantalan roda, dll., yang disebabkan oleh beda potensial logam.
Harap perhatikan torsi pengencangan yang ditentukan oleh pabrikan.
Jika kendaraan dipasang menggunakan mur stok, periksa murnya.
Jika mur rusak karena terguling, dll., atau jika bagian self-locking aus, pastikan untuk menggunakan mur baru. Hal ini untuk mencegah kerusakan pada ulir poros.
[Tentang kualitas produk]
KOOD telah mengambil semua langkah yang mungkin untuk mengelola produksi. Namun, jika ada masalah, harap hubungi KOOD sebelum bekerja.
*Dalam hal apa pun KOOD tidak akan menerima klaim atau pengembalian apa pun setelah pemasangan (seperti memasukkan poros ke dalam roda).
Tentang karat
Poros KOOD diperlakukan dengan "film pelapis 3 lapis".
Ini diproses dengan film yang lebih kuat dari film pelapis biasa. Karat dapat terjadi tergantung pada kondisi penggunaan, tetapi tidak ada masalah dengan kualitasnya.
Transfer karat : Karat dari luar masuk ke permukaan berlapis
Kerusakan pada film pelapis... Penggunaan alat yang tidak tepat, batu terbang saat berkendara, jatuh, dll.
[Peringatan]
Dalam kasus poros KOOD dengan mur berlapis, sering terjadi kerusakan pada ulir selama pemasangan.
Karena sifat pelapisan, hal ini sering terlihat saat bagian berlapis (mis. Poros KOOD dan mur KOOD) saling bertautan atau bila bagian berulir tidak berminyak.
Harap gunakan gemuk anti korosif seperti kompon sledge pada bagian sekrup saat Anda memasangnya.
*Mungkin ada perubahan spesifikasi produk karena alasan pabrikan. *There may be changes in product specifications due to the manufacturer's reasons.
*Even if the vehicle is compatible, it will not fit if the front forks are not stock or if the vehicle has been customized.
[About the installation]
*Axle shafts are critical parts.
Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".
It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
・Transferred rust: Rust from the outside gets on the plated surface
・Damage to the plating film... Improper use of tools, flying rocks during riding, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/