- Beranda
- Motor
- HONDA 0 - 50cc
- MONKEY
- Sparepart Motor
- Suspensi / Rearset / Velg / Swingarm
- Suspensi / Shock Belakang
- Set Shock Depan
- GM-MOTO
- GM-MOTO: Shock Depan Upright KEPSPEED
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Untuk Monkey
[Daftar produk] .
Shock depan set komplit custom upright L tipe 5 Φ30
Bracket lampu depan Φ36 (sudah terpasang)
As shock depan Φ30 (sudah terpasang)
Cover as shock depan Φ39 (sudah terpasang)
Master rem & kaliper rem single push 1POD
Hub cakram
Cakram Φ150
Kabel speedometer
Gearbox speedometer (untuk 10 inci)
As roda Panjang =220mm
Bearing atas dan bawah untuk rangka Monkey
[Spesifikasi tiap part]
Panjang shock depan: 515mm (Standar): 480mm)
Pitch shock depan: 168mm (ukuran sama dengan bawaan)
Negara asal: CHINA
Produsen: KEPSPEED for MONKEY
[Product List].
5Type LΦ30 upright CustomFront fork complete set
SpecializedΦ36Headlight Bracket (already assembled)
DedicatedΦ30Inner Tube (already built in)
DedicatedΦ39Outer tube (already built in)
Dedicated Brake master cylinder & single push 1PODBrake Caliper
・Disc Hub
・Φ150Disc Rotor
68cm square-Square TypeMeter cable
Dedicated Meter gear (for 10-inches)
・L=220mmAxle Shaft
Upper and lower Stem bearing&Race for MONKEYFrame
Spec of each part. ]
Fork length:515mm(Stem topBracket top to Axle Shaft center)(OEM):480mm)
Fork pitch:168mm (core-to-core)(same as OEM value etc.). )
Country of Origin:CHINA
producer:KEPSPEED
[Daftar produk] .
Shock depan set komplit custom upright L tipe 5 Φ30
Bracket lampu depan Φ36 (sudah terpasang)
As shock depan Φ30 (sudah terpasang)
Cover as shock depan Φ39 (sudah terpasang)
Master rem & kaliper rem single push 1POD
Hub cakram
Cakram Φ150
Kabel speedometer
Gearbox speedometer (untuk 10 inci)
As roda Panjang =220mm
Bearing atas dan bawah untuk rangka Monkey
[Spesifikasi tiap part]
Panjang shock depan: 515mm (Standar): 480mm)
Pitch shock depan: 168mm (ukuran sama dengan bawaan)
Negara asal: CHINA
Produsen: KEPSPEED for MONKEY
[Product List].
5Type LΦ30 upright CustomFront fork complete set
SpecializedΦ36Headlight Bracket (already assembled)
DedicatedΦ30Inner Tube (already built in)
DedicatedΦ39Outer tube (already built in)
Dedicated Brake master cylinder & single push 1PODBrake Caliper
・Disc Hub
・Φ150Disc Rotor
68cm square-Square TypeMeter cable
Dedicated Meter gear (for 10-inches)
・L=220mmAxle Shaft
Upper and lower Stem bearing&Race for MONKEYFrame
Spec of each part. ]
Fork length:515mm(Stem topBracket top to Axle Shaft center)(OEM):480mm)
Fork pitch:168mm (core-to-core)(same as OEM value etc.). )
Country of Origin:CHINA
producer:KEPSPEED
[Deskripsi]
KEPSPEED telah memasuki garpu depan!
Aku ingin terlihat keren bahkan saat berdiri tegak!
Penampilan menghitam dan elegan.
Ketebalan yang tepat untuk memberikan kesan orang besar yang chic..
Besar dan Tangguh, MONYET seperti itu dapat dibuat dengan mudah!
UpperPlate selesai dengan hasil matte yang lusuh.
CustomAppeal halus dengan KEPSPEEDMark di tabung Luar. KEPSPEED expands into front forks!!!
I want to look cool in the upright position!
The black color scheme gives it a graceful appearance.
The moderate thickness creates a chic adult impression.
Mature but tough, you can make such a monkey easily!
The upper plate has a cool matte finish.
The KEPSPEED mark on the outer tube provides a subtle custom appeal.
Aku ingin terlihat keren bahkan saat berdiri tegak!
Penampilan menghitam dan elegan.
Ketebalan yang tepat untuk memberikan kesan orang besar yang chic..
Besar dan Tangguh, MONYET seperti itu dapat dibuat dengan mudah!
UpperPlate selesai dengan hasil matte yang lusuh.
CustomAppeal halus dengan KEPSPEEDMark di tabung Luar. KEPSPEED expands into front forks!!!
I want to look cool in the upright position!
The black color scheme gives it a graceful appearance.
The moderate thickness creates a chic adult impression.
Mature but tough, you can make such a monkey easily!
The upper plate has a cool matte finish.
The KEPSPEED mark on the outer tube provides a subtle custom appeal.
Peringatan
*Shock depan ini dirancang untuk digunakan dengan velg 10". Karena kaliper besar, velg 8 inci tidak dapat digunakan.
*Kemungkinan ada sedikit perubahan spesifikasi di tiap part.
*Pemasangan harap dilakukan di bengkel oleh mekanik berpengalaman.
*Walau ini adalah produk pengganti bawaan, tetap harus diatur kembali jika diperlukan.
*Kesesuaian dengan produk dari brand lain belum dikonfirmasi.
*Tidak termasuk bracket lampu sein.
*Velg harus di posisi tengah. Part setelan diperlukan secara terpisah tergantung dari velg yang digunakan.
*Saat mulai berkendara, harap perhatikan cek secara berkala untuk mencegah kendala yang tidak terduga.
*Mungkin terdapat goresan kecil karena proses impor.
*Kami tidak menerima pengembalian, penggantian dan pembatalan produk setelah dipesan
*Semua produk GM-MOTO ialah produk custom. Produk ini dirancang untuk memenuhi kebutuhan pengguna sehingga beberapa bagian mungkin mengubah performa berkendara aslinya.
*Produk ini mungkin tidak dapat dipasang atau memerlukan setelan atau modifikasi di beberapa area. *This front fork is designed to be used with 10 inches wheels.8 inches wheels are not available due to the large caliper.
*Please note that there may be slight specification changes in each part.In such a case, the actual item will be given priority, although it may differ from the image shown in the introduction.
*Please have assembly work done in a specialist shop regarding motorcycle maintenance.
*Although these will be stock replacement parts, please make adjustments as necessary.Installation compatibility has been confirmed with 4L/5L Chinese frames.
*We have not verified compatibility with other companies' products.
*Blinker brackets are not included.
*Centering is required for wheels.Adjustment parts other than the supplied parts are required, but please prepare them separately according to the wheel you use.
※ There may be some minor specification changes for each product.The actual product takes precedence over the images shown here, which may differ slightly from the images shown here.
※ After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
※ GM-MOTO does not accept returns for any reason after the product has been installed.
*In addition, problems that occur after the vehicle has started running are often caused by mismatches between driving conditions, maintenance conditions, or the condition of the vehicle, and are difficult to distinguish from individual product causes.
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.
*In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*There may be changes in product specifications due to the manufacturer's reasons.
*Kemungkinan ada sedikit perubahan spesifikasi di tiap part.
*Pemasangan harap dilakukan di bengkel oleh mekanik berpengalaman.
*Walau ini adalah produk pengganti bawaan, tetap harus diatur kembali jika diperlukan.
*Kesesuaian dengan produk dari brand lain belum dikonfirmasi.
*Tidak termasuk bracket lampu sein.
*Velg harus di posisi tengah. Part setelan diperlukan secara terpisah tergantung dari velg yang digunakan.
*Saat mulai berkendara, harap perhatikan cek secara berkala untuk mencegah kendala yang tidak terduga.
*Mungkin terdapat goresan kecil karena proses impor.
*Kami tidak menerima pengembalian, penggantian dan pembatalan produk setelah dipesan
*Semua produk GM-MOTO ialah produk custom. Produk ini dirancang untuk memenuhi kebutuhan pengguna sehingga beberapa bagian mungkin mengubah performa berkendara aslinya.
*Produk ini mungkin tidak dapat dipasang atau memerlukan setelan atau modifikasi di beberapa area. *This front fork is designed to be used with 10 inches wheels.8 inches wheels are not available due to the large caliper.
*Please note that there may be slight specification changes in each part.In such a case, the actual item will be given priority, although it may differ from the image shown in the introduction.
*Please have assembly work done in a specialist shop regarding motorcycle maintenance.
*Although these will be stock replacement parts, please make adjustments as necessary.Installation compatibility has been confirmed with 4L/5L Chinese frames.
*We have not verified compatibility with other companies' products.
*Blinker brackets are not included.
*Centering is required for wheels.Adjustment parts other than the supplied parts are required, but please prepare them separately according to the wheel you use.
※ There may be some minor specification changes for each product.The actual product takes precedence over the images shown here, which may differ slightly from the images shown here.
※ After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
※ GM-MOTO does not accept returns for any reason after the product has been installed.
*In addition, problems that occur after the vehicle has started running are often caused by mismatches between driving conditions, maintenance conditions, or the condition of the vehicle, and are difficult to distinguish from individual product causes.
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.
*In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/