- Beranda
- Motor
- KAWASAKI 1001cc -
- ZEPHYR1100 (ZR1100)
- Sparepart Motor
- Sparepart Mesin
- Mesin
- Valve Guide
- Bagus! Motor cycle
- Bagus! Motor cycle: Valve Guide
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Valve guide universal 0.5mm oversize 8-piece
[Ukuran] 12.50mm
[Bahan] Sintered alloy
[Spek]
•Masuk: 4pcs.
•Keluar: 4pcs.
•C-ring: 8pcs.
Universal valve guide 0.5mm oversize 8-piece set
[Size] 12.50mm
[Material] Sintered alloy
[Specification]
・Intake: 4pcs.
・Exhaust: 4pcs.
・C-rings: 8pcs.
[Ukuran] 12.50mm
[Bahan] Sintered alloy
[Spek]
•Masuk: 4pcs.
•Keluar: 4pcs.
•C-ring: 8pcs.
Universal valve guide 0.5mm oversize 8-piece set
[Size] 12.50mm
[Material] Sintered alloy
[Specification]
・Intake: 4pcs.
・Exhaust: 4pcs.
・C-rings: 8pcs.
[Deskripsi]
Panduan katup" sekarang menjadi kebutuhan untuk perombakan mesin.
Karena tidak ada pengaturan kebesaran untuk stock valve guide, setelah valve guide ditarik keluar, seringkali sulit untuk mendapatkan ruang yang cukup untuk press-fit guide dan head dan guide rattle.
Pabrikan ini biasa membuat suku cadang satu kali, tetapi biayanya terlalu tinggi dan waktu pengiriman terlalu lama, sehingga mereka membuat suku cadang yang diproduksi secara massal dengan paduan sinter 12,50 mm, kebesaran 0,5 mm.
Ini dapat digunakan untuk seri Z serta Zephyr 750 dan Zephyr 1100. Valve guides" are now a necessity for engine overhaul.
Since there is no oversize setting for the stock valve guide, once the valve guide is pulled out, it is often difficult to get enough space to press-fit the guide and the head and the guide rattle.
This manufacturer used to make one-off parts, but the cost was too high and the delivery time was too long, so they made mass-produced parts with 12.50mm sintered alloy, 0.5mm oversize.
It can be used for Z series as well as Zephyr 750 and Zephyr 1100.
Karena tidak ada pengaturan kebesaran untuk stock valve guide, setelah valve guide ditarik keluar, seringkali sulit untuk mendapatkan ruang yang cukup untuk press-fit guide dan head dan guide rattle.
Pabrikan ini biasa membuat suku cadang satu kali, tetapi biayanya terlalu tinggi dan waktu pengiriman terlalu lama, sehingga mereka membuat suku cadang yang diproduksi secara massal dengan paduan sinter 12,50 mm, kebesaran 0,5 mm.
Ini dapat digunakan untuk seri Z serta Zephyr 750 dan Zephyr 1100. Valve guides" are now a necessity for engine overhaul.
Since there is no oversize setting for the stock valve guide, once the valve guide is pulled out, it is often difficult to get enough space to press-fit the guide and the head and the guide rattle.
This manufacturer used to make one-off parts, but the cost was too high and the delivery time was too long, so they made mass-produced parts with 12.50mm sintered alloy, 0.5mm oversize.
It can be used for Z series as well as Zephyr 750 and Zephyr 1100.
Peringatan
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/