- Beranda
- Motor
- HONDA 51 - 125cc
- NSR80
- Sparepart Motor
- Sparepart Mesin
- Sparepart Intake
- Karburator
- KITACO
- KITACO: Satu Set Karburator (Besar) KEIHIN PC Φ24mm
Satu Set Karburator (Besar) KEIHIN PC Φ24mm
- Nomor produk: 110-1081308
-
- IN STOCK
- Out Stock
- KITACO
- |
- 4.3
- (4 ulasan)
Cek kupon saya
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
■Pengisian bisa dilakukan secara terpisah.
■Main Jet #130, Pilot Jet #52 sudah terpasang.
[Isi Produk]
Satu Set Karburator PE Φ24×1pc.
Main Jet (PE/PWK/FCR)#125×1pc.
Main Jet (PE/PWK/FCR)#132×1pc.
Manifold Set×1pc.
Body manifold ×1pc.
Klem selang stainless steel (Φ25-40) ×1pc.)
■Separation Refueling is possible.
■Main Jet #130, Pilot Jet #52 are already installed.
[Product Contents]
PE Φ24 Carburetor Assembly ×1pc.
Main Jet (PE/PWK/FCR)#125×1pc.
Main Jet (PE/PWK/FCR)#132×1pc.
Manifold Set×1pc.
Manifold Body ×1pc.
Stainless Band (Φ25-40) ×1pc.)
[Deskripsi]
Direkomendasikan untuk karburator KEIHIN PE & # 934; 24 nada tengah. Tenaga dan torsi peringkat teratas didemonstrasikan.
Manifold yang disertakan memperbesar diameter port dan meningkatkan jumlah asupan udara.
This Keihin PEΦ24 carburetor is recommended for middle tuners.The power and torque are one rank higher.
○The attached manifold has a larger port diameter to increase the intake air volume.
Catatan
Silakan kunjungi situs web Produsen untuk informasi lebih lanjut tentang produk.
Please visit the manufacturer's website for more information about the product.
Click here for Kitako general information page.
Peringatan
CATATAN : Jenis jet perlu diatur tergantung pada spesifikasi mesin dan lingkungan berkendara. Pastikan untuk menggunakan produk OEM untuk pengaturan karena kit Karburator Besar KITACO telah mengadopsi semua suku cadang OEM produsen karburator. Ini dapat menyebabkan masalah dan pengaturan yang benar tidak akan keluar jika menggunakan selain OEM.
* Tidak mungkin menggunakan pembersih udara STD.
* Membutuhkan kabel throttle (Nomor Suku Cadang : 905-1010000) saat memasang di NS-1.
* Membutuhkan pelepasan atau pemrosesan kotak helm saat memasang di NS-1.
* Tidak mungkin memasang ruang masuk STD untuk NSR50 / 80 dan NS-1 (95-).
* Diperlukan untuk memotong bagian karet di bagian bawah manifold sesuai dengan tahun MBX50.
Note: It is necessary to set up the jets according to the specification of the engine and the driving environment.The Kitaco Big Carburetor Kit uses the stock kit from the carburetor manufacturer, so please be sure to use the stock kit for setting.If you use other than the stock one, the correct setting will not be obtained and it may cause trouble.
*Stock air cleaner cannot be used.
*When installing on the NS-1, use the throttle sub cable (Part number: 905-1010000) is required.
*When installing on NS-1, removal or modification of the helmet box is required.
*NSR50/80,NS-1(95-) can not be installed to stock intake chamber.
*The rubber part of the lower part of the manifold needs to be cut for MBX50 depending on the year.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/