- Beranda
- Sparepart Motor
- Sparepart Stang & Kemudi
- Sistem Kendali
- High Throttle Kit
- DAYTONA
- DAYTONA: High Slow Kit Fuel Mix
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Kesesuaian] Berbagai model karbuator besar dari Φ20-Φ28 (PE, PWK, VM, PC, CR-mini, VM, YOSHIMURA YD24/28)
[Ukuran]
Panjang luar: 760mm
Radius Rolling: 29mm
[Spek]
Buatan DAYTONA. sampai tinggi (MID), 760mm (29240)
Grip tipe ujung terbuka
[Compatible] Various big carbs from Φ20-Φ28 (PE, PWK, VM, PC, CR-mini, VM, YOSHIMURA YD24/28)
[Size]
Outer length: 760mm
Rolling radius: 29mm
[Specifications]
Made in DAYTONA. Up to Ride Bar(MID), 760mm(29240)
Grip end through type
.
[Ukuran]
Panjang luar: 760mm
Radius Rolling: 29mm
[Spek]
Buatan DAYTONA. sampai tinggi (MID), 760mm (29240)
Grip tipe ujung terbuka
[Compatible] Various big carbs from Φ20-Φ28 (PE, PWK, VM, PC, CR-mini, VM, YOSHIMURA YD24/28)
[Size]
Outer length: 760mm
Rolling radius: 29mm
[Specifications]
Made in DAYTONA. Up to Ride Bar(MID), 760mm(29240)
Grip end through type
.
[Deskripsi]
Kit Throttle Super Tinggi untuk Karburator Besar (Φ20-Φ28) dirancang untuk menghasilkan jumlah terbaik.
Dalam kasus Φ28, itu dapat terbuka penuh dengan rotasi sekitar 55 derajat. Φ20-Φ28 Designed for optimum take-up of various big cabs!
Φ20-Φ28 Super high throttle kit designed for the optimum take-up volume for various big cabs (PE, PWK, VM, PC, CR-mini, VM, Yoshimura YD24/28).
In the case of the Φ28 carburetor, it takes about 55 degrees of rotation to fully open.
For use with the NSR50 and NS-1, it can be used with either the stock carburetor or the Daytona big carburetor kit.
Dalam kasus Φ28, itu dapat terbuka penuh dengan rotasi sekitar 55 derajat. Φ20-Φ28 Designed for optimum take-up of various big cabs!
Φ20-Φ28 Super high throttle kit designed for the optimum take-up volume for various big cabs (PE, PWK, VM, PC, CR-mini, VM, Yoshimura YD24/28).
In the case of the Φ28 carburetor, it takes about 55 degrees of rotation to fully open.
For use with the NSR50 and NS-1, it can be used with either the stock carburetor or the Daytona big carburetor kit.
Catatan
Cek manual pemasangan di sini
Cek sparepart di sini
Cek sparepart di sini
Here is the instruction manual
Repair Parts are here
Repair Parts are here
Peringatan
APE memerlukan sistem rem cakram.
*APE memerlukan dudukan handle rem terpisah.
*≪Untuk digunakan di 2-tak dengan karburator besar
*Setelah memasang produk ini, perlu menguras oli dari oil pump dan halangi intake oli di sisi manifold karburator.
*Ketika menggunakan produk ini di TZR50/R dan TZM50R, perlu mengganti karburator dengan karburator besar karena panjang kabelnya tidak cukup untuk karburator bawaan.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
* *APE needs to be converted to disc brakes.
*APE requires a separate brake lever holder.
*After installing the product, it is necessary to drain the oil in the oil pump and to block the oil inlet on the carburetor manifold side.
*When using this product on the TZR50/R and TZM50R, the cable length is not long enough for the stock carburetor, so it is necessary to replace it with a big carburetor.
*There may be changes in product specifications due to the manufacturer's reasons.
*APE memerlukan dudukan handle rem terpisah.
*≪Untuk digunakan di 2-tak dengan karburator besar
*Setelah memasang produk ini, perlu menguras oli dari oil pump dan halangi intake oli di sisi manifold karburator.
*Ketika menggunakan produk ini di TZR50/R dan TZM50R, perlu mengganti karburator dengan karburator besar karena panjang kabelnya tidak cukup untuk karburator bawaan.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
* *APE needs to be converted to disc brakes.
*APE requires a separate brake lever holder.
*After installing the product, it is necessary to drain the oil in the oil pump and to block the oil inlet on the carburetor manifold side.
*When using this product on the TZR50/R and TZM50R, the cable length is not long enough for the stock carburetor, so it is necessary to replace it with a big carburetor.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/