- Beranda
- Sparepart Motor
- Kelistrikan
- Lampu
- Aksesoris LED
- amon
- amon: Side-view LED
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Kendaraan DC12V Eksklusif
Dimungkinkan untuk menghubungkan hingga 10 pcs. (* Solder diperlukan.)
[Warna]
Warna Cahaya LED : Putih (Temperatur Warna : 8000K)
[Konsumsi saat ini]
17mA
[Tali]
0.2sq Equivalent-200mm
[Ukuran badan]
6mm × 15mm / Tebal 1.7mm
[Bahan]
Penutup / ABS, Kabel / Konduktor : Kawat Tembaga Anil Listrik dan Penutup Isolasi : Vinyl Klorida, Pita Dua Sisi / Bahan Dasar : Busa polietilen / perekat : Perekat Sensitif Tekanan Akrilik
Penutup Eksklusif / dengan Pita Dua Sisi For DC12V vehicles only
Up to 10 units can be connected (*soldering required)
[Color]
LED Emission Color: White (color temperature: 8000 Kelvin)
[Current consumption]
17mA
[code]
Equivalent to 0.2sq - 200mm
[Body size]
6mm x 15mm ・Thickness 1.7mm
[Material]
Cover / ABS, Cord / Conductor: Electrical soft copper wire and insulation coating: PVC, double-sided tape / base material: Foamed polyethylene, adhesive: Acrylic adhesive
With dedicated cover and double-sided tape
Dimungkinkan untuk menghubungkan hingga 10 pcs. (* Solder diperlukan.)
[Warna]
Warna Cahaya LED : Putih (Temperatur Warna : 8000K)
[Konsumsi saat ini]
17mA
[Tali]
0.2sq Equivalent-200mm
[Ukuran badan]
6mm × 15mm / Tebal 1.7mm
[Bahan]
Penutup / ABS, Kabel / Konduktor : Kawat Tembaga Anil Listrik dan Penutup Isolasi : Vinyl Klorida, Pita Dua Sisi / Bahan Dasar : Busa polietilen / perekat : Perekat Sensitif Tekanan Akrilik
Penutup Eksklusif / dengan Pita Dua Sisi For DC12V vehicles only
Up to 10 units can be connected (*soldering required)
[Color]
LED Emission Color: White (color temperature: 8000 Kelvin)
[Current consumption]
17mA
[code]
Equivalent to 0.2sq - 200mm
[Body size]
6mm x 15mm ・Thickness 1.7mm
[Material]
Cover / ABS, Cord / Conductor: Electrical soft copper wire and insulation coating: PVC, double-sided tape / base material: Foamed polyethylene, adhesive: Acrylic adhesive
With dedicated cover and double-sided tape
[Deskripsi]
Ideal untuk pencahayaan titik!
Tipis dan kecil! Mudah dipasang!
Penutup khusus disertakan.
Kabel dapat disesuaikan dengan lokasi.
Dapat dihubungkan dengan penyolderan (hingga 10 buah)
[Instruksi instalasi]
1. Lepaskan terminal baterai negatif untuk alasan keamanan ..
2. Hubungkan kabel putih ke positif (mis. Daya ACC).
3. Hubungkan kabel hitam ke negatif (mis. Dasar tubuh).
4. Pasang terminal baterai negatif ..
[Cara memasang papan LED dan penutup]
1. Pasang selotip kecil dua sisi ke bagian belakang unit LED dan pasang ke penutup ..
2. Oleskan selotip dua sisi ukuran besar ke penutup, bersihkan minyak, kelembapan dan kotoran dari area yang akan ditutup, kemudian tekan dengan kuat selotip ke penutup .. ●Ideal for point lighting!
●Thin and small!Easy installation by just sticking
●With special cover
●Wiring can be done accordingto the location
●Can be connected by soldering (max. 10 pieces)
[Installation Instructions]
1. Remove the negative terminal of the battery for safety reasons.
2. Connect the cord with the white line to the positive (such as ACC power).
3. Connect the black cord to the negative (e.g. body ground).
4. Install the negative terminal of the battery.
[How to install the LED board and cover]
1. Attach the double-sided tape (small) to the back of the LED body and fix it on the cover.
2.Attach the double-sided tape (large) to the cover, remove oil, moisture and dirt from the area to be attached, and press firmly to attach.
Tipis dan kecil! Mudah dipasang!
Penutup khusus disertakan.
Kabel dapat disesuaikan dengan lokasi.
Dapat dihubungkan dengan penyolderan (hingga 10 buah)
[Instruksi instalasi]
1. Lepaskan terminal baterai negatif untuk alasan keamanan ..
2. Hubungkan kabel putih ke positif (mis. Daya ACC).
3. Hubungkan kabel hitam ke negatif (mis. Dasar tubuh).
4. Pasang terminal baterai negatif ..
[Cara memasang papan LED dan penutup]
1. Pasang selotip kecil dua sisi ke bagian belakang unit LED dan pasang ke penutup ..
2. Oleskan selotip dua sisi ukuran besar ke penutup, bersihkan minyak, kelembapan dan kotoran dari area yang akan ditutup, kemudian tekan dengan kuat selotip ke penutup .. ●Ideal for point lighting!
●Thin and small!Easy installation by just sticking
●With special cover
●Wiring can be done accordingto the location
●Can be connected by soldering (max. 10 pieces)
[Installation Instructions]
1. Remove the negative terminal of the battery for safety reasons.
2. Connect the cord with the white line to the positive (such as ACC power).
3. Connect the black cord to the negative (e.g. body ground).
4. Install the negative terminal of the battery.
[How to install the LED board and cover]
1. Attach the double-sided tape (small) to the back of the LED body and fix it on the cover.
2.Attach the double-sided tape (large) to the cover, remove oil, moisture and dirt from the area to be attached, and press firmly to attach.
Peringatan
* Harap pastikan untuk membaca peringatan di bagian belakang paket sebelum menggunakan. *
*Before use, please read the instructions on the back of the package.*
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/