- Beranda
- Motor
- BETA 126 - 250cc
- RR2T 250Racing
- Sparepart Motor
- Sparepart Mesin
- Mesin
- Kepala Silinder
- S3
- S3: Cylinder Star Head - Haute-compression rouge Beta
Cylinder Star Head - Haute-compression rouge Beta
- Nomor produk: 1011505
-
- NEW
- IN STOCK
- Out Stock
- S3
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Manufacturer Parts No.] ST-632-AA
[Manufacturer Parts No.] ST-632-AA
[Deskripsi]
S3 is the specialist in Trial and Enduro parts. Innovation and high quality are the key words guiding the design of the elements that will make a difference. Tested in all conditions, the S3 products are at the cutting edge of technology and equip the best riders and trial teams. It uses the best alloys available, to obtain a better output & more traction. The advantage of these heads is that they can hold more water and have thicker walls which helps with the cooling rate, thus improving slightly low revs power.
It uses the best alloys available, to obtain a better output & more traction.
Forging them eliminates the hot spots found on casted heads.
Ensure a better cooling rate.
Different compression Inlet, what changes?
Standard compression (STD) : Higher torque and power at low revs. Even though it is similar to the original compression, you will notice the difference.
High compression (A) : Possibility to add another gear, better traction and very clean response.
Very high compression ( AA y AAA) : Specially for altitudes over 1500m , or MX engine preparation.
Low compression : Incredible traction, smooth response, the best riders use it. It's a delight!
Fitment :
BETA::RR 250 2T::20::::
BETA::RR 250 2T ENDURO::13-19::::
BETA::RR 250 2T ENDURO RACING::14-19::::
BETA::RR 250 2T RACING::20::::
BETA::RR 300 2T ENDURO::13-19::::
BETA::RR 300 2T ENDURO RACING::13-19:::: S3 is the specialist in Trial and Enduro parts. Innovation and high quality are the key words guiding the design of the elements that will make a difference. Tested in all conditions, the S3 products are at the cutting edge of technology and equip the best riders and trial teams. It uses the best alloys available, to obtain a better output & more traction. The advantage of these heads is that they can hold more water and have thicker walls which helps with the cooling rate, thus improving slightly low revs power.
It uses the best alloys available, to obtain a better output & more traction.
Forging them eliminates the hot spots found on casted heads.
Ensure a better cooling rate.
Different compression Inlet, what changes?
Standard compression (STD) : Higher torque and power at low revs. Even though it is similar to the original compression, you will notice the difference.
High compression (A) : Possibility to add another gear, better traction and very clean response.
Very high compression ( AA y AAA) : Specially for altitudes over 1500m , or MX engine preparation.
Low compression : Incredible traction, smooth response, the best riders use it. It's a delight!
Fitment :
BETA::RR 250 2T::20::::
BETA::RR 250 2T ENDURO::13-19::::
BETA::RR 250 2T ENDURO RACING::14-19::::
BETA::RR 250 2T RACING::20::::
BETA::RR 300 2T ENDURO::13-19::::
BETA::RR 300 2T ENDURO RACING::13-19::::
It uses the best alloys available, to obtain a better output & more traction.
Forging them eliminates the hot spots found on casted heads.
Ensure a better cooling rate.
Different compression Inlet, what changes?
Standard compression (STD) : Higher torque and power at low revs. Even though it is similar to the original compression, you will notice the difference.
High compression (A) : Possibility to add another gear, better traction and very clean response.
Very high compression ( AA y AAA) : Specially for altitudes over 1500m , or MX engine preparation.
Low compression : Incredible traction, smooth response, the best riders use it. It's a delight!
Fitment :
BETA::RR 250 2T::20::::
BETA::RR 250 2T ENDURO::13-19::::
BETA::RR 250 2T ENDURO RACING::14-19::::
BETA::RR 250 2T RACING::20::::
BETA::RR 300 2T ENDURO::13-19::::
BETA::RR 300 2T ENDURO RACING::13-19:::: S3 is the specialist in Trial and Enduro parts. Innovation and high quality are the key words guiding the design of the elements that will make a difference. Tested in all conditions, the S3 products are at the cutting edge of technology and equip the best riders and trial teams. It uses the best alloys available, to obtain a better output & more traction. The advantage of these heads is that they can hold more water and have thicker walls which helps with the cooling rate, thus improving slightly low revs power.
It uses the best alloys available, to obtain a better output & more traction.
Forging them eliminates the hot spots found on casted heads.
Ensure a better cooling rate.
Different compression Inlet, what changes?
Standard compression (STD) : Higher torque and power at low revs. Even though it is similar to the original compression, you will notice the difference.
High compression (A) : Possibility to add another gear, better traction and very clean response.
Very high compression ( AA y AAA) : Specially for altitudes over 1500m , or MX engine preparation.
Low compression : Incredible traction, smooth response, the best riders use it. It's a delight!
Fitment :
BETA::RR 250 2T::20::::
BETA::RR 250 2T ENDURO::13-19::::
BETA::RR 250 2T ENDURO RACING::14-19::::
BETA::RR 250 2T RACING::20::::
BETA::RR 300 2T ENDURO::13-19::::
BETA::RR 300 2T ENDURO RACING::13-19::::
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/