Check my coupons
Product Detail
Specification:
[Size]
Vertical: Approx. 60.5mm
Width: Approx. 130mm
[Material]
Steel
[Components]
Bracket x 1
Vertical: Approx. 60.5mm
Width: Approx. 130mm
[Material]
Steel
[Components]
Bracket x 1
[Description]
[The license plate number position was relocated to create a clean rear area]
Tail kit that relocates the license plate number position and allows you to change to a cleaner rear area.
[Smart rear area]
Huge stock tail lamps and blinkers are replaced with a clean and clear look.
With reflectors for safety, it creates a smart rear area.
[Smart rear area]
LED tail lamps with solid visibility despite their small size are adopted.
[With blinker bracket]
It is possible to install your favorite M10 indicator.
[Tail cover]
Simple type without tail cover and.
It can choose between an original billet tail cover and your favorite design, created in pursuit of a simple design that does not interfere with the atmosphere of the chassis.
■Rear Conversion KITRebel250 (MC49) /500 (PC60)
[Installation Instructions]
・Removal of stock parts.
Remove the seat, tail lamps and fenders.
・Prepare a rear conversion kit.
Take out the product and set the tail lamps, blinkers and reflectors.
・Rear conversion kit is installed on the bike.
The wiring is routed through the fender's clearance like the stock tail.
・Install fenders.
Cover the fender with the tail lamps and other wiring with room to spare.
・Install the conversion kit.
Install the conversion kit and fix each bolt.
Connect each wire according to the wiring reference diagram.
Tail kit that relocates the license plate number position and allows you to change to a cleaner rear area.
[Smart rear area]
Huge stock tail lamps and blinkers are replaced with a clean and clear look.
With reflectors for safety, it creates a smart rear area.
[Smart rear area]
LED tail lamps with solid visibility despite their small size are adopted.
[With blinker bracket]
It is possible to install your favorite M10 indicator.
[Tail cover]
Simple type without tail cover and.
It can choose between an original billet tail cover and your favorite design, created in pursuit of a simple design that does not interfere with the atmosphere of the chassis.
■Rear Conversion KITRebel250 (MC49) /500 (PC60)
[Installation Instructions]
・Removal of stock parts.
Remove the seat, tail lamps and fenders.
・Prepare a rear conversion kit.
Take out the product and set the tail lamps, blinkers and reflectors.
・Rear conversion kit is installed on the bike.
The wiring is routed through the fender's clearance like the stock tail.
・Install fenders.
Cover the fender with the tail lamps and other wiring with room to spare.
・Install the conversion kit.
Install the conversion kit and fix each bolt.
Connect each wire according to the wiring reference diagram.
Caution
*Wiring modification is required for installation.
*Some blinker lights may require relay replacement.
*Explanations regarding tools to be used and general wiring procedures are omitted.
*If you are unsure about the installation, please be sure to have a knowledgeable person or custom store perform the work.
*Some adjustments and innovations may be necessary due to individual differences in bike bodies.
*Other rear conversions are included in the image.
*There may be changes in product specifications due to the manufacturer's reasons.
*The blinkers shown in the installation image are as follows.
Sequential LED blinker (Part No.: G6-00269)
*A special blinker relay for LEDs is required.
[Reference]
2017-2019:
[DAYTONA] LED compatible blinker relay HONDA-4PIN
2020-:
[DAYTONA] LED compatible blinker relay HONDA-8Pin ESS compatible
*Some blinker lights may require relay replacement.
*Explanations regarding tools to be used and general wiring procedures are omitted.
*If you are unsure about the installation, please be sure to have a knowledgeable person or custom store perform the work.
*Some adjustments and innovations may be necessary due to individual differences in bike bodies.
*Other rear conversions are included in the image.
*There may be changes in product specifications due to the manufacturer's reasons.
*The blinkers shown in the installation image are as follows.
Sequential LED blinker (Part No.: G6-00269)
*A special blinker relay for LEDs is required.
[Reference]
2017-2019:
[DAYTONA] LED compatible blinker relay HONDA-4PIN
2020-:
[DAYTONA] LED compatible blinker relay HONDA-8Pin ESS compatible
