- Home
- Model
- KAWASAKI 1001cc -
- Z1100GP (KZ1100GP)
- Motorcycle Parts
- Exhausts
- Full System Exhausts
- NITRO RACING
- NITRO RACING: 4in1 Hand Bent Titanium Exhaust System
4in1 Hand Bent Titanium Exhaust System
- Product number: EX-03HBT4-V1
-
- IN STOCK
- Out Stock
- NITRO RACING
- |
- 0.0
- (0 review)
Check my coupons
Product Detail
Specification:
[Material]
・Silencer: Titanium
・Exhaust pipe: Titanium
[Specification]
・Exhaust pipe: half-polished
・Assembly method: 4in1
・Exhaust pipe diameter: Φ42.7
・Tail pipe outer diameter: Φ60.5
[Components]
・Exhaust pipe per vehicle
・Assembly part
・Tailpipe
・8 springs
・Silencer
・End baffle
・Silencer band
・Silencer Bracket
[Maintenance Data]
Drain bolt: Manifold section must be detached
Oil filter replacement: Assembly part removal required
Center stand: Not available
・Silencer: Titanium
・Exhaust pipe: Titanium
[Specification]
・Exhaust pipe: half-polished
・Assembly method: 4in1
・Exhaust pipe diameter: Φ42.7
・Tail pipe outer diameter: Φ60.5
[Components]
・Exhaust pipe per vehicle
・Assembly part
・Tailpipe
・8 springs
・Silencer
・End baffle
・Silencer band
・Silencer Bracket
[Maintenance Data]
Drain bolt: Manifold section must be detached
Oil filter replacement: Assembly part removal required
Center stand: Not available
[Description]
The φ42.7 EX pipe has a powerful curve and a strong silhouette unique to hand-bent EX.
Not only its looks, but also the thorough pursuit of driving performance based on feedback from the racing field.
The EX layout is as close to the body as possible, and the center clustered section ensures a bank angle that is suitable for circuit driving, and a generous minimum ground clearance.
Not only its looks, but also the thorough pursuit of driving performance based on feedback from the racing field.
The EX layout is as close to the body as possible, and the center clustered section ensures a bank angle that is suitable for circuit driving, and a generous minimum ground clearance.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*The end baffle is pre-installed on the silencer at the time of shipment.
*Conical titanium silencers V-1 / V-2 / V-3 do not come with a silencer band as a bracket is pre-installed.
*NEVER remove the silencing baffle from the NITRO RACING silencer.It is also recommended to check and overhaul the silencer's internal sound deadening wool on a regular basis.
*Grenade titanium silencers are mounted with a Φ90 diameter silencer band.
*You need to change to single type rearset.
*Some types of blinkers may interfere with silencers.In this case, you will need to replace the blinkers.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/