- Home
- Motorcycle Parts
- Electrical
- Lights
- LED Headlight Bulb
- PROTEC
- PROTEC: LB7W-H LED Headlight Valve
Check my coupons
Product Detail
Specification:
For Hi beam only
Hi / Lo Switchable LED Bulb
12v 20 / 20w 6000K
Screw-in fan unit
With inspection association certificate
Hi / Lo Switchable LED Bulb
12v 20 / 20w 6000K
Screw-in fan unit
With inspection association certificate
[Description]
The new version of H7 LED with improved ease of installation!
The integrated fan and seat sink unit is screwed into the back of the LED bulb.
Conventional H7 was
In the conventional product, the fan base, heat sink, and fan are assembled with 7-8 screws in this order and then installed in the vehicle.
This version is
Simply remove the stock bulb, install the LED bulb and rubber cap, and tighten the fan.
Installation time is greatly reduced!
The flange part has been improved to allow the LED bulb insertion angle to be selected in 90 degree increments.
Compatible with HONDA Hi-Beam and others.
The length of the LED bulb can be adjusted to fit your model.
The rear part of the LED bulb can be disassembled to adjust the length.
It can be shortened by 6mm by removing the center spacer and countersunk screw.
The integrated fan and seat sink unit is screwed into the back of the LED bulb.
Conventional H7 was
In the conventional product, the fan base, heat sink, and fan are assembled with 7-8 screws in this order and then installed in the vehicle.
This version is
Simply remove the stock bulb, install the LED bulb and rubber cap, and tighten the fan.
Installation time is greatly reduced!
The flange part has been improved to allow the LED bulb insertion angle to be selected in 90 degree increments.
Compatible with HONDA Hi-Beam and others.
The length of the LED bulb can be adjusted to fit your model.
The rear part of the LED bulb can be disassembled to adjust the length.
It can be shortened by 6mm by removing the center spacer and countersunk screw.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/