- Home
- Model
- HONDA 0 - 50cc
- MONKEY
- Motorcycle Parts
- Suspensions / Rearsets / Wheels / Swingarms
- Swingarms
- G-Craft
- G-Craft: Swingarm STD
Check my coupons
Product Detail
Specification:
for Twin Shock
for MONKEY R Wheel
Swingarm Pipe Shape: STD
Stabilizer: -
Material: Aluminum 7N01
for MONKEY R Wheel
Swingarm Pipe Shape: STD
Stabilizer: -
Material: Aluminum 7N01
[Description]
This is a swingarm which can be used for Monkey / Gorilla with Monkey R's wheel.
The width of the swinging arm is designed to be 188-191mm.
It is possible to use the 10 inch wheel of Monkey R to make Monkey 10 inch.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Option 1] Chain slider bolt fixing specification (G-Craft part number:60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Option 2] Pivot part bearing specification (G-Craft part number: 60006)
The standard is to change the pivot part of the bushing to a bearing.
Improved durability and smooth operating characteristics.
[Option 3] Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
Note
Click here for other G-Craft Monkey Twin Shock Swingarms.
Here are other swing arms for G-Craft Monkey Monoshock.
Click here for other G-Craft Monkey truss swing arms.
Click here for Other G-Craft Monkey Normal Look Swingarm.
Click here for Other G-Craft Monkey R Wheel Mount Twin Shock Swingarm.
For other G-Craft Standard Wheels Twin Shock Swingarm is here.
Click here for other G-Craft NSR wheel mounted twin shock swing arms.
Click here for other G-Craft Twin Shock Swingarm for Super Wide Wheels.
For other G-Craft Wide Wheel Twin Shock Swingarm is here.
* The image is only for reference. The image shown may differ from the actual product.
Caution
*Front offset sprocket 7mm is required for wheel installation.
*Only triple square pipe, chain slider is also attached at the bottom.
*Image 3 is optional: This is an image of the chain slider bolt fixing.
*Image 4 is optional: This is an image of the ball bearing structure of the pivot section.
*Image 5 is optional: The image above shows Stand Hook Base (M6).
*Only triple square pipe, chain slider is also attached at the bottom.
*Image 3 is optional: This is an image of the chain slider bolt fixing.
*Image 4 is optional: This is an image of the ball bearing structure of the pivot section.
*Image 5 is optional: The image above shows Stand Hook Base (M6).
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/