Check my coupons
Product Detail
Specification:
for Mono Shock
for NSR50/80 Wheel
Swingarm Pipe Shape: STD
Stabilizer: -
Material: Aluminum 7N01
for NSR50/80 Wheel
Swingarm Pipe Shape: STD
Stabilizer: -
Material: Aluminum 7N01
[Description]
This is a swingarm that can be used with NSR50 / 80 wheels on Monkey / Gorilla.
Swingarm width is 184-187mm.
Using the 12 inch wheel of NSR50 / 80 to convert the Monkey to 12 inch can be done.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Options: Chain Slider Specifications]
Chain slider bolt fixing specification (G-Craft part number: 60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Options: Additional processing of stand hook base]
Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Options: Pivot section structure]
Pivot section bearing specification (G-Craft part number: 60006)
The standard is to change the pivot part of the bushing to a bearing.
Improved durability and smooth operating characteristics.
Note
Click here for other G-Craft Monkey Twin Shock Swingarms.
Here are other swing arms for G-Craft Monkey Monoshock.
Click here for other G-Craft Monkey truss swing arms.
Click here for Other G-Craft Monkey Normal Look Swingarm.
Click here for Other G-Craft R Wheel Mount Monoshock Swingarms.
For other G-Craft Standard Wheels Monoshock Swingarm are here.
Click here for other G-Craft NSR wheel mounted monoshock swingarms.
For other G-Craft Super Wide Wheels Monoshock Swingarm are here.
For other G-Craft Wide Wheel Monoshock Swingarm is here.
* The image is only for reference. The image shown may differ from the actual product.
Caution
*Front offset sprocket 7mm is required for wheel installation.
*Only triple square pipe, chain slider is also attached at the bottom.
*Please use the rear shock for NSR50 / 80.
*The Type 2 with Standard Stabilizer has a 42mm x 32mm main pipe.(Normal standard stubby is 32mm x 32mm thin pipe)
*Product is swingarm body only.
*Image 3 shows (1) black anodized finish and (2) Cerakote finish.
*Image 4 is optional: This is an image of the chain slider bolt fixing.
*Image 5 is optional: The image above shows Stand Hook Base (M6).
*Image 6 is optional: This is an image of the pivot bearing specification.
*Image 7 is optional: This is an image of the height adjustable suspension mount function.
*Triple Square and Triple Square Mini for Monkey are standard swingarm pivot construction: Bearings.
*Only triple square pipe, chain slider is also attached at the bottom.
*Please use the rear shock for NSR50 / 80.
*The Type 2 with Standard Stabilizer has a 42mm x 32mm main pipe.(Normal standard stubby is 32mm x 32mm thin pipe)
*Product is swingarm body only.
*Image 3 shows (1) black anodized finish and (2) Cerakote finish.
*Image 4 is optional: This is an image of the chain slider bolt fixing.
*Image 5 is optional: The image above shows Stand Hook Base (M6).
*Image 6 is optional: This is an image of the pivot bearing specification.
*Image 7 is optional: This is an image of the height adjustable suspension mount function.
*Triple Square and Triple Square Mini for Monkey are standard swingarm pivot construction: Bearings.
