Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
APE 100
APE 50
Product Detail
Specification:
For Type D (NSR) Wheels
Swingarm pipe shape: Stock
Stabilizer: without
Material: Aluminum 7N01 material used
Swingarm pipe shape: Stock
Stabilizer: without
Material: Aluminum 7N01 material used
[Description]
Swingarm Weight: Stock 3.5kg to 1.8kg (*)
The swingarm is made of aluminum 7N01 material, which is 1.8kg (*) lighter than stock swingarm 3.5kg, and has high rigidity, which improves the operability of the motorcycle by reducing the unsprung weight.
This swingarm can fit NSR50/80 (Type D) wheels.
Swingarm width is 184-187mm.
A U-shaped brake stopper is welded to the inside of the swingarm.
G-Craft Part Number: The 33136 rear caliper support and the rear disc hub for Ape can be used to convert a drum model to a disc model.
G-Craft Part Number: Disc conversion is possible with 33136 rear caliper support and NSR50 / 80 wheels.
Fits 12-3.75J aluminum wheels.
*:Model: GROM / Pipe Type: Triple Square / No Stabilizer / +0cm
■Option Description
[Options: Swingarm finish] Black anodized / Cerakote
・Black anodized aluminum (G-Craft part number: 60198)
This is an option to make the surface of the swingarm beautiful black anodized finish.
・Cerakote (G-Craft part number: 60807)
Cerakote is a special baking and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.
This gives a pear-like surface, but the coating can be very thin (25 microns), and weld marks (beads) can be left without being obscured.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
[Option 1] Chain slider bolt fixing specification (G-Craft part number:60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Option 2] Pivot section ball bearing change (G-Craft part number: 60006)
The pivot part that normally uses bushings is converted to ball bearings.
[Option 3] Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
Note
Other Ape [Swingarm for Type D (NSR) Wheel] here.
Other Ape [Drum/Disc Wheel Shared Swingarm] here
Other Ape [Swingarm for Drum Brake Hub] here.
Click here for other Ape [NS-1 Wheel Swingarm].
Caution
*Images are for reference only.Please confirm the shape of the pipe in the image 2 before purchasing.
*Images 3 and 4 are for installation on the bike.The swingarm is made of pipe: Triple Square with Stabilizer (Linkless Type 2).
*Image 5 is the image of (1) black anodized finish and (2) Cerakote finish.
*Image 6 is optional: This is an image of the ball bearing structure of the pivot section.
*Image 7 is optional: This is an image of the chain slider bolt fixing.
*Image 8 is optional: The image above shows Stand Hook Base (M6).
*Rear shock is compatible with stock APE (link type).
*Images 3 and 4 are for installation on the bike.The swingarm is made of pipe: Triple Square with Stabilizer (Linkless Type 2).
*Image 5 is the image of (1) black anodized finish and (2) Cerakote finish.
*Image 6 is optional: This is an image of the ball bearing structure of the pivot section.
*Image 7 is optional: This is an image of the chain slider bolt fixing.
*Image 8 is optional: The image above shows Stand Hook Base (M6).
*Rear shock is compatible with stock APE (link type).
Applicable Models
APE 100
APE 50
