Check my coupons
Product Detail
Specification:
Swing arm pipe shape :triple square
Stabilizers :without
Material :Aluminum 7N01 material used
Stabilizers :without
Material :Aluminum 7N01 material used
[Description]
NSR50/80 wheels can be installed.
Swingarm Weight: Stock 3.5kg to 1.8kg (*)
The swingarm is made of aluminum 7N01 material, which is 1.8kg (*) lighter than stock swingarm 3.5kg, and has high rigidity, which improves the operability of the motorcycle by reducing the unsprung weight.
There are three types of pipe shapes: Standard, Triple Square and Triple Square Mini Pipe.It can be selected with or without stabilization, and 18 types of 3 different lengths are set.
(*) = bike type: GROM / Pipe Type: Triple Square / No Stabilizer / +0cm
■Option Description
[Option 1] Chain slider bolt fixing specification (G-Craft part number:60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Option 2] Needle bearing change at pivot (G-Craft part number: 60187) +5000yen
The pivot part that normally uses bushings is converted to needle bearings.
[Option 3] Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Option 4] Ride height adjustable suspension mount function addition processing (G-Craft part number: 60057)
It is changed to the suspension receiver with the height adjustment function of 7.5mm.
By moving the mountain part, you can easily change the rear ride height.*Exclusively designed for NSR50 / 80 rear shock.
[Option 5] Racing stand hook specification OW type chain puller processing (G-Craft part number: 60188)
The chain puller is tapered to eliminate vertical misalignment of the axle shaft.
The tapered frame moves so there is no vertical misalignment.This mechanism is also used for swingarms of big bikes.
G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Craft Part Number: 33170AP Lockheed caliper support cannot be installed (will interfere)
Swingarm Weight: Stock 3.5kg to 1.8kg (*)
The swingarm is made of aluminum 7N01 material, which is 1.8kg (*) lighter than stock swingarm 3.5kg, and has high rigidity, which improves the operability of the motorcycle by reducing the unsprung weight.
There are three types of pipe shapes: Standard, Triple Square and Triple Square Mini Pipe.It can be selected with or without stabilization, and 18 types of 3 different lengths are set.
(*) = bike type: GROM / Pipe Type: Triple Square / No Stabilizer / +0cm
■Option Description
[Option 1] Chain slider bolt fixing specification (G-Craft part number:60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Option 2] Needle bearing change at pivot (G-Craft part number: 60187) +5000yen
The pivot part that normally uses bushings is converted to needle bearings.
[Option 3] Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Option 4] Ride height adjustable suspension mount function addition processing (G-Craft part number: 60057)
It is changed to the suspension receiver with the height adjustment function of 7.5mm.
By moving the mountain part, you can easily change the rear ride height.*Exclusively designed for NSR50 / 80 rear shock.
[Option 5] Racing stand hook specification OW type chain puller processing (G-Craft part number: 60188)
The chain puller is tapered to eliminate vertical misalignment of the axle shaft.
The tapered frame moves so there is no vertical misalignment.This mechanism is also used for swingarms of big bikes.
G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Craft Part Number: 33170AP Lockheed caliper support cannot be installed (will interfere)
Note
Pipe Shape:Click here for Triple Square (with Stabilizer).
Pipe Shape:Standard (with/without stabilizer) is here.
Pipe Shape:Click here for Triple Square Mini (with/without Stabilizer).
Caution
*Caution when using NSR50 wheels
・Front offset sprocket 7mm is required for installation.
・It is necessary to remove 5mm from the rear plot mounting surface.
*Images are for reference only.
*Photo 3 shows the surface finish: This is an image of the black anodized finish.
*Photo 4 is optional: This is an image of the needle bearing structure of the pivot section.
*Photo 5 is optional: This is an image of the chain slider bolt fixing.
*Photo 6 is optional: The image above shows Stand Hook Base (M6).
*Photo 7 is optional: This is an image of the height adjustable suspension mount function.
*Photo 8 is optional: This is the image of Racing stand hook specification OW type chain puller processing.
・Front offset sprocket 7mm is required for installation.
・It is necessary to remove 5mm from the rear plot mounting surface.
*Images are for reference only.
*Photo 3 shows the surface finish: This is an image of the black anodized finish.
*Photo 4 is optional: This is an image of the needle bearing structure of the pivot section.
*Photo 5 is optional: This is an image of the chain slider bolt fixing.
*Photo 6 is optional: The image above shows Stand Hook Base (M6).
*Photo 7 is optional: This is an image of the height adjustable suspension mount function.
*Photo 8 is optional: This is the image of Racing stand hook specification OW type chain puller processing.
