- Home
- Motorcycle Parts
- Electrical
- Switches / Harnesses
- Other Harnesses
- DAYTONA
- DAYTONA: Repair Pulse Harness
Check my coupons
Product Detail
Specification:
Plug cord wrapping type
Harness length: 500mm
Appendix: Extension harness (320mm)×1
Harness length: 500mm
Appendix: Extension harness (320mm)×1
[Description]
Harness set for pulse signal extraction when installing an electric tachometer (universal type).
Pulse Harness Wrapped Around Plug Cord.
All 2nd and some 4th models are of this type.
Pulse Harness Wrapped Around Plug Cord.
All 2nd and some 4th models are of this type.
Note
Compatible Tachometers are here.
Caution
*The recommended wrapping length is 1 to 10 wraps.Excessive wrapping will increase the pulse sensitivity too much and cause the meter to malfunction.
*Wraping point should be slightly away from the plug cap.If it is close to the plug cap, it is more likely to pick up noise.
*When the pulse sensitivity is stabilized, be sure to fix the wrapped part tightly with the insulation tape.If the pulse harness leaks during rain, it may cause the meter to malfunction.
*Wraping point should be slightly away from the plug cap.If it is close to the plug cap, it is more likely to pick up noise.
*When the pulse sensitivity is stabilized, be sure to fix the wrapped part tightly with the insulation tape.If the pulse harness leaks during rain, it may cause the meter to malfunction.
Applicable Models
Universal
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/