Check my coupons
Product Detail
Specification:
Color: Silver (outer part) / Red (center part)
Neck length 30mm long
Neck length 30mm long
[Description]
■About Neck Length
・The standard setting is 30mm long.(Same size as OV-30/33)
・The available sizes are OEM long (24 degrees) and 60mm long (30 degrees).
■Product Features
・Offset engine position and selectable chainline for monkey wheel or NSR series wheel.There is no need to use a front offset sprocket.
・The swingarm for Monkey can be installed and it is suitable for long, wide and NSR width.
・The NSF100 shock unit can be attached to the monoshock specification with the OVER swingarm.Wide, NSR width, and other specifications can be changed at the time of order.
・The swingarm pivot shaft can be used with OEM's Φ10mm and the size-up Φ12mm, and by using OVER's Φ12 bearing swingarm, the rigidity is equivalent to that of 12 inches bikes such as NSF100 and XR Motard.
・The standard setting is 30mm long.(Same size as OV-30/33)
・The available sizes are OEM long (24 degrees) and 60mm long (30 degrees).
■Product Features
・Offset engine position and selectable chainline for monkey wheel or NSR series wheel.There is no need to use a front offset sprocket.
・The swingarm for Monkey can be installed and it is suitable for long, wide and NSR width.
・The NSF100 shock unit can be attached to the monoshock specification with the OVER swingarm.Wide, NSR width, and other specifications can be changed at the time of order.
・The swingarm pivot shaft can be used with OEM's Φ10mm and the size-up Φ12mm, and by using OVER's Φ12 bearing swingarm, the rigidity is equivalent to that of 12 inches bikes such as NSF100 and XR Motard.
Note
If you would like to order a color, please purchase this item at the same time.
Caution
*There may be changes in product specifications due to the manufacturer's reasons.
*The image may include other types and colorings.
*When using the OVER rearset in the engine mounting position (left offset) to match the NSR chainline, a rearset bracket set is required.
*The bearing race is not press-fitted.
*Options are installed in the image.(Engine mount plate)
*3-position rearset (Part No. 51-01-51, 51-01-52) cannot be installed if an engine mount plate is installed or if a pivot diameter of Φ12 is used.
*The image shows 30mm long red anodized aluminum (standard setting).
*The image may include other types and colorings.
*When using the OVER rearset in the engine mounting position (left offset) to match the NSR chainline, a rearset bracket set is required.
*The bearing race is not press-fitted.
*Options are installed in the image.(Engine mount plate)
*3-position rearset (Part No. 51-01-51, 51-01-52) cannot be installed if an engine mount plate is installed or if a pivot diameter of Φ12 is used.
*The image shows 30mm long red anodized aluminum (standard setting).
