Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
FC350-650 00-08
FE350-650 00-08
FS350-650 00-08
Show more
FC125-501 14-19
FE125-501 14-19
FE501 14-19
FX125-501 14-19
TC125-501 14-19
TE125-501 14-19
TX125-501 14-19
701Enduro 16-19
TX125 14-19 TX125-501
TE125 14-19 TE125-501
TC125 14-19 TC125-501
Show more
125-690 EXC 91-19
125-690 EXC-F 91-19
125-690 EXC-R 91-19
125-690 SMR 91-19
125-690 SX 91-19
125-690 SXF 91-19
125-690 XC 91-19
125-690 XCW 91-19
125SX 91-19 125-690 SX
125EXC 91-19 125-690 EXC
Show more
Product Detail
Specification:
For rear
Chain size: 520
Material: Steel
Chain size: 520
Material: Steel
[Description]
The durability is incomparable to that of aluminum by optimizing the material and heat treatment.
The design of the steel sprocket is made by high-precision laser cutting, and it has an excellent strength balance and is about 30% lighter than a standard steel sprocket.
The design of the steel sprocket is made by high-precision laser cutting, and it has an excellent strength balance and is about 30% lighter than a standard steel sprocket.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*Design varies depending on the number of teeth, size and models.
*520 conversion size is available for DT125R / 200R, DT230 LANZA, TT250R RAID, KDX125SR, SX125R, JEBEL 125, DF125 and DR125.The stock model is 428, so please make sure you buy the right one.
*DT200WR, TT250R, WR250R / X, KLX125 / D-TRACKER125 require a taper sprocket bolt separately.
*If you want to change the size of your sprocket, you will need the correct chain for that size.
*Even if the number of teeth is selectable, it does not mean that all the parts can be installed.It may interfere with the vehicle body or other parts, or cause problems.If it is unavoidable to increase the number of teeth in the rear, please decrease the number of teeth in the front and adjust it so that the balance between front and rear can be obtained.
*520 conversion size is available for DT125R / 200R, DT230 LANZA, TT250R RAID, KDX125SR, SX125R, JEBEL 125, DF125 and DR125.The stock model is 428, so please make sure you buy the right one.
*DT200WR, TT250R, WR250R / X, KLX125 / D-TRACKER125 require a taper sprocket bolt separately.
*If you want to change the size of your sprocket, you will need the correct chain for that size.
*Even if the number of teeth is selectable, it does not mean that all the parts can be installed.It may interfere with the vehicle body or other parts, or cause problems.If it is unavoidable to increase the number of teeth in the rear, reduce the number of teeth in the front so that the balance between the front and rear can be achieved.
*520 conversion size is available for DT125R / 200R, DT230 LANZA, TT250R RAID, KDX125SR, SX125R, JEBEL 125, DF125 and DR125.The stock model is 428, so please make sure you buy the right one.
*DT200WR, TT250R, WR250R / X, KLX125 / D-TRACKER125 require a taper sprocket bolt separately.
*If you want to change the size of your sprocket, you will need the correct chain for that size.
*Even if the number of teeth is selectable, it does not mean that all the parts can be installed.It may interfere with the vehicle body or other parts, or cause problems.If it is unavoidable to increase the number of teeth in the rear, please decrease the number of teeth in the front and adjust it so that the balance between front and rear can be obtained.
*520 conversion size is available for DT125R / 200R, DT230 LANZA, TT250R RAID, KDX125SR, SX125R, JEBEL 125, DF125 and DR125.The stock model is 428, so please make sure you buy the right one.
*DT200WR, TT250R, WR250R / X, KLX125 / D-TRACKER125 require a taper sprocket bolt separately.
*If you want to change the size of your sprocket, you will need the correct chain for that size.
*Even if the number of teeth is selectable, it does not mean that all the parts can be installed.It may interfere with the vehicle body or other parts, or cause problems.If it is unavoidable to increase the number of teeth in the rear, reduce the number of teeth in the front so that the balance between the front and rear can be achieved.
Applicable Models
FC350-650 00-08
FE350-650 00-08
FS350-650 00-08
Show more
FC125-501 14-19
FE125-501 14-19
FE501 14-19
FX125-501 14-19
TC125-501 14-19
TE125-501 14-19
TX125-501 14-19
701Enduro 16-19
TX125 14-19 TX125-501
TE125 14-19 TE125-501
TC125 14-19 TC125-501
Show more
125-690 EXC 91-19
125-690 EXC-F 91-19
125-690 EXC-R 91-19
125-690 SMR 91-19
125-690 SX 91-19
125-690 SXF 91-19
125-690 XC 91-19
125-690 XCW 91-19
125SX 91-19 125-690 SX
125EXC 91-19 125-690 EXC
Show more
