Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
SPORTSTERFamily Other adaptability information] 1 inch bar handle employed vehicle(Springer, Deuce, V-ROD)(not adaptable to Springer, Deuce, V-ROD, Fat bar type vehicle, and vehicle with integrated top clamp and riser)(2007 or later FLSTF, XL1200X, etc)
SOFTAILFamily Other adaptability information] 1 inch bar handle employed vehicle(Springer, Deuce, V-ROD)(not adaptable to Springer, Deuce, V-ROD, Fat bar type vehicle, and vehicle with integrated top clamp and riser)(2007 or later FLSTF, XL1200X, etc)
DYNAFamily Other adaptability information] 1 inch bar handle employed vehicle(Springer, Deuce, V-ROD)(not adaptable to Springer, Deuce, V-ROD, Fat bar type vehicle, and vehicle with integrated top clamp and riser)(2007 or later FLSTF, XL1200X, etc)
Show more
Product Detail
Specification:
[Product Description]
Riser X2 (left and right 1 set)
[Color]
Chrome
[Dimensions]
Height approx. 216mm (from the bottom to the center of the handle).)
Riser bolt hole 1/2-13
[Material]
Aluminum
Riser X2 (left and right 1 set)
[Color]
Chrome
[Dimensions]
Height approx. 216mm (from the bottom to the center of the handle).)
Riser bolt hole 1/2-13
[Material]
Aluminum
[Description]
It's an 8.5 pullback riser.
Since the top clamp is not through, the stock top clamp bolt may be too long.
In this case, please cut it off or use the suitable top clamp bolt.
Please calculate the space carefully so that the handlebar does not hit the tank.
Use this if you want to make it higher.
Please calculate the space carefully so that the handlebar does not hit the tank.
Deuce can be supported by using the special solid mount.
The torque value of the stock top clamp bolt is 16.3-20.3Nm.
Since the top clamp is not through, the stock top clamp bolt may be too long.
In this case, please cut it off or use the suitable top clamp bolt.
Please calculate the space carefully so that the handlebar does not hit the tank.
Use this if you want to make it higher.
Please calculate the space carefully so that the handlebar does not hit the tank.
Deuce can be supported by using the special solid mount.
The torque value of the stock top clamp bolt is 16.3-20.3Nm.
Note
Other colorings are here.
Click here for dedicated solid mount.
Caution
*This product requires a top clamp.
*In case of using the stock top clamp, cut off the stock top clamp bolt.
*This product is not compatible with the type of top clamp where the bolt positions are parallel on both sides (the bolt position is not an inverted trapezoid when viewed from the seat side).
*Tighten the top clamp bolt evenly.
*Overtorque may damage the riser unit.
*In case of using the stock top clamp, cut off the stock top clamp bolt.
*This product is not compatible with the type of top clamp where the bolt positions are parallel on both sides (the bolt position is not an inverted trapezoid when viewed from the seat side).
*Tighten the top clamp bolt evenly.
*Overtorque may damage the riser unit.
Applicable Models
SPORTSTERFamily Other adaptability information] 1 inch bar handle employed vehicle(Springer, Deuce, V-ROD)(not adaptable to Springer, Deuce, V-ROD, Fat bar type vehicle, and vehicle with integrated top clamp and riser)(2007 or later FLSTF, XL1200X, etc)
SOFTAILFamily Other adaptability information] 1 inch bar handle employed vehicle(Springer, Deuce, V-ROD)(not adaptable to Springer, Deuce, V-ROD, Fat bar type vehicle, and vehicle with integrated top clamp and riser)(2007 or later FLSTF, XL1200X, etc)
DYNAFamily Other adaptability information] 1 inch bar handle employed vehicle(Springer, Deuce, V-ROD)(not adaptable to Springer, Deuce, V-ROD, Fat bar type vehicle, and vehicle with integrated top clamp and riser)(2007 or later FLSTF, XL1200X, etc)
Show more
