Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
SPORTSTERFamily Other compatible information]1" bar handle (Not compatible with Springer, Deuce and V-ROD. Not compatible with fat bar models and models with integrated top clamp and riser (FLSTF, XL1200X etc. from 2007))
DYNAFamily Other compatible information]1" bar handle (Not compatible with Springer, Deuce and V-ROD. Not compatible with fat bar models and models with integrated top clamp and riser (FLSTF, XL1200X etc. from 2007))
SOFTAILFamily Other compatible information]1" bar handle (Not compatible with Springer, Deuce and V-ROD. Not compatible with fat bar models and models with integrated top clamp and riser (FLSTF, XL1200X etc. from 2007))
Show more
Product Detail
Specification:
[Product Description]
Riser X2 (left and right 1 set)
[Color]
Chrome
[Dimensions]
Height approx. 100mm (from the bottom to the center of the handle).)
Pull back approx. 30mm (from the center of the bottom to the center of the handle.)
[Material]
Aluminum
Riser X2 (left and right 1 set)
[Color]
Chrome
[Dimensions]
Height approx. 100mm (from the bottom to the center of the handle).)
Pull back approx. 30mm (from the center of the bottom to the center of the handle.)
[Material]
Aluminum
[Description]
4-1/2 inch pullback risers.
It is originally used for 77-81Y FX series and 84Y FXST and later.
However, it might be a good idea for people who have a far handlebar in other years.
Please calculate the space carefully so that the handlebar does not hit the tank.
Since the top clamp is not through, the stock top clamp bolt may be too long.
In this case, please cut it off or use the suitable top clamp bolt.
Deuce can be supported by using the special solid mount.
The torque value of the stock top clamp bolt is 16.3-20.3Nm.
It is originally used for 77-81Y FX series and 84Y FXST and later.
However, it might be a good idea for people who have a far handlebar in other years.
Please calculate the space carefully so that the handlebar does not hit the tank.
Since the top clamp is not through, the stock top clamp bolt may be too long.
In this case, please cut it off or use the suitable top clamp bolt.
Deuce can be supported by using the special solid mount.
The torque value of the stock top clamp bolt is 16.3-20.3Nm.
Note
Other colorings are here.
Click here for dedicated solid mount.
Caution
*This product requires a top clamp.
*In case of using the stock top clamp, cut off the stock top clamp bolt.
*This product is not compatible with the type of top clamp where the bolt positions are parallel on both sides (the bolt position is not an inverted trapezoid when viewed from the seat side).
*Tighten the top clamp bolt evenly.
*Overtorque may damage the riser unit.
*In case of using the stock top clamp, cut off the stock top clamp bolt.
*This product is not compatible with the type of top clamp where the bolt positions are parallel on both sides (the bolt position is not an inverted trapezoid when viewed from the seat side).
*Tighten the top clamp bolt evenly.
*Overtorque may damage the riser unit.
Applicable Models
SPORTSTERFamily Other compatible information]1" bar handle (Not compatible with Springer, Deuce and V-ROD. Not compatible with fat bar models and models with integrated top clamp and riser (FLSTF, XL1200X etc. from 2007))
DYNAFamily Other compatible information]1" bar handle (Not compatible with Springer, Deuce and V-ROD. Not compatible with fat bar models and models with integrated top clamp and riser (FLSTF, XL1200X etc. from 2007))
SOFTAILFamily Other compatible information]1" bar handle (Not compatible with Springer, Deuce and V-ROD. Not compatible with fat bar models and models with integrated top clamp and riser (FLSTF, XL1200X etc. from 2007))
Show more