• Home
  • Model
  • KAWASAKI 1001cc -
  • ZRX1200 DAEG
  • Motorcycle Parts
  • Handles & Control Parts
  • Handlebars
  • HURRICANE
  • HURRICANE: BM Continental 2 Type Φ7/8-inches Handlebar Steel
  • BM Continental 2 Type Φ7/8-inches Handlebar Steel - Webike Indonesia
  • BM Continental 2 Type Φ7/8-inches Handlebar Steel - Webike Indonesia
  • BM Continental 2 Type Φ7/8-inches Handlebar Steel - Webike Indonesia
  • BM Continental 2 Type Φ7/8-inches Handlebar Steel - Webike Indonesia

BM Continental 2 Type Φ7/8-inches Handlebar Steel

  • Product number: HB0005B-01
    • IN STOCK
    • Out Stock

Rp623,000

*VAT 11% included

Webike Points: +6,230 Points

Delivery information

  • Please wait...
to Jakarta, South Jakarta, Cilandak
CHANGE
Select address
Shipping Fee Rp20,000
Check my coupons

Quantity

100% Original 7 Days Warranty Free Cashback Net Price

Applicable Models

See All
HONDA
CB400SF 08-21 NC42 VTEC Revo *Requires switch hole drilling|*Requires side cap (for inner diameter 18mm) CB400SF -98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID) CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) APE 50 -07|08 (Carburetor)*APE100 (09-) only APE 100 -12 (drum brake)*APE100 (09-) requires drilling of switch holes. APE 50 08-12 (FI Drum Brake) *Processing of switch holes is required MONKEY 84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required MONKEY 09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole HORNET250 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable. CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID) CB400SUPER BOLDOR 05-07 NC39 *Processing of switch hole required|* Required side cap (for 18mm diameter) CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID) CB400SF 99-07 NC39 VTEC II* requires drilling of switch hole|* requires side cap (for 18mm ID) CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID) VTR250 09-12 MC33 (1300001-)(FI car) *Processing to drill switch hole is required|* Required side cap (for 18mm diameter) VTR250 03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID) NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter) FTR223 (with side numbers) * Requires modification of the clutch cable and choke cable.
Show more
YAMAHA
XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter) XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID) XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID) TW225E 00- (Disc Brake Car) *Processing of switch hole is required TW200E 00- (Disc Brake Car) *Processing of switch hole is required TW200E -99 (drum brakes) TW200 -99 (drum brakes) SR500 88-00 (CV carburetor) *Processing to drill switch holes is required SR400 88-00 (CV carburetor) *Processing to drill switch holes is required SR400 01-12 (Carb/FI Disc Brake Car) *Processing of switch hole is required
Show more
Others
Universal
SUZUKI
GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps. GRASS TRACKER Big Boy -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo. GRASS TRACKER 09-12 09-12(FI cars)*Side caps can be used with the stock ones. GRASS TRACKER -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo. GSX400 05-07 GK7CA *Processing of the switch hole is required|* You can use the normal side cap. ST250 E Type -07 NJ4AA *Processing of switch holes required|* Normal side caps can be used. RV200 VANVAN -07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used. ST250 -07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used for stock. GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
Show more

Product Detail

Specification:

Handlebar Color: Black

[Handlebar Specification]
Handlebar: Steel, Black/Outer Diameter Φ22.2mm/Inner Diameter Φ18mm
It is possible to use STD Cable and Hose.

[Handlebar Size]
Overall Height: 80mm
Overall Width: 680mm
Holder Mounting Part Effective Width: 115mm
Pullback Size: 125mm
Inner Angle: 28-degrees
Anteversion Angle: 95-degrees

[Description]


Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Cleared by JMCA safety standard value.Double anti-corrosion treatment by acrylic coating over black chrome plating.

Note



Click for MONKEY Handle Holder
Click for other colors.
Normal Handle Size List for 7/8 inch road models.
Normal Handle Size List for 7/8 American model scooters.
Normal Handle Size List for 1 Inch American models.

Caution


*Handlebar clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.

Applicable Models

HONDA
CB400SF 08-21 NC42 VTEC Revo *Requires switch hole drilling|*Requires side cap (for inner diameter 18mm) CB400SF -98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID) CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) APE 50 -07|08 (Carburetor)*APE100 (09-) only APE 100 -12 (drum brake)*APE100 (09-) requires drilling of switch holes. APE 50 08-12 (FI Drum Brake) *Processing of switch holes is required MONKEY 84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required MONKEY 09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole HORNET250 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable. CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID) CB400SUPER BOLDOR 05-07 NC39 *Processing of switch hole required|* Required side cap (for 18mm diameter) CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID) CB400SF 99-07 NC39 VTEC II* requires drilling of switch hole|* requires side cap (for 18mm ID) CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID) VTR250 09-12 MC33 (1300001-)(FI car) *Processing to drill switch hole is required|* Required side cap (for 18mm diameter) VTR250 03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID) NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter) FTR223 (with side numbers) * Requires modification of the clutch cable and choke cable.
Show more
YAMAHA
XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter) XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID) XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID) TW225E 00- (Disc Brake Car) *Processing of switch hole is required TW200E 00- (Disc Brake Car) *Processing of switch hole is required TW200E -99 (drum brakes) TW200 -99 (drum brakes) SR500 88-00 (CV carburetor) *Processing to drill switch holes is required SR400 88-00 (CV carburetor) *Processing to drill switch holes is required SR400 01-12 (Carb/FI Disc Brake Car) *Processing of switch hole is required
Show more
Others
Universal
SUZUKI
GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps. GRASS TRACKER Big Boy -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo. GRASS TRACKER 09-12 09-12(FI cars)*Side caps can be used with the stock ones. GRASS TRACKER -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo. GSX400 05-07 GK7CA *Processing of the switch hole is required|* You can use the normal side cap. ST250 E Type -07 NJ4AA *Processing of switch holes required|* Normal side caps can be used. RV200 VANVAN -07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used. ST250 -07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used for stock. GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
Show more
KAWASAKI
BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) BALIUS 91-94 *Processing of switch hole required|* Required side cap (for 18mm diameter) ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) 250TR -06 *Requires switch hole drilling|* Requires changing the orientation of the brake banjo and throttle holder. ZRX1100II *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) ZRX1100 *Requires drilling of switch hole| * Requires side cap (for 18mm diameter) W800 *Required Switch Hole Drilled W400 *Required Switch Hole Drilled ZrX1200ZrX1200 DAEG *Requires drilling of switch hole| * Requires side cap (for 18mm diameter) ZRX1200R *Requires drilling of switch hole| * Requires side cap (for 18mm diameter) ZRX400II *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) ZRX400 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) ZEPHYR400 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) ZEPHYR1100 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) ZEPHYR1100 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) ESTRELLARSCustom 96-99 *Processing of switch hole required|* Required side cap (for 18mm ID)
Show more

Model Page Links

ALSO VIEWED PRODUCTS

PRODUCT READY TO SHIP

Recommend for You

BEST SELLING

MOST VIEWED PRODUCTS

See all

New Custom Article

See all