- Home
- Motorcycle Parts
- Suspensions / Rearsets / Wheels / Swingarms
- Suspensions
- Inner Tube
- SPEC
- SPEC: OHLINS Front Fork Extension Kit
Check my coupons
Product Detail
Specification:
Ohlins Φ43 upright forks
Color: gold
With adjust type
Color: gold
With adjust type
[Description]
A must have for diverting forks!
Anodized aluminum finish for added texture!
[Features]
This is a part to correct the fork length when the front fork is replaced with the stock one.
Even if you have installed a high performance fork, the basic rule is to make the length of the fork the same as the stock fork (close to the stock fork in millimeters) before starting the setting.
It's not an exaggeration to say that this is a very important part that can make or break your new fork.
Anodized aluminum finish for added texture!
[Features]
This is a part to correct the fork length when the front fork is replaced with the stock one.
Even if you have installed a high performance fork, the basic rule is to make the length of the fork the same as the stock fork (close to the stock fork in millimeters) before starting the setting.
It's not an exaggeration to say that this is a very important part that can make or break your new fork.
Note
Other colorings are here.
Caution
[Notes]
It is not necessary to change the spring, etc. when installing the fork, but if the fork is inverted or upright and has an adjustment function, it is necessary to have someone with experience in maintenance perform the work to ensure correct installation and subsequent function may be impaired.
Always install the product under the supervision of a person with proper knowledge.
*When replacing the Ohlins extension kit, the cap removal tool for upright Ohlins is required.
*Image 1 shows the length: 30mm, Image 2 is length: 60mm.
It is not necessary to change the spring, etc. when installing the fork, but if the fork is inverted or upright and has an adjustment function, it is necessary to have someone with experience in maintenance perform the work to ensure correct installation and subsequent function may be impaired.
Always install the product under the supervision of a person with proper knowledge.
*When replacing the Ohlins extension kit, the cap removal tool for upright Ohlins is required.
*Image 1 shows the length: 30mm, Image 2 is length: 60mm.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/