This high quality race-like style exhaust is the result of a collaboration (joint production) between Custom Scooter Magazine and WirusWin.This exhaust is suitable for a wide range of people from young to old, from stock vehicles to hard custom vehicles.
The Beat It Exhaust is the ultimate in high quality, packed full of advanced technology. ・The baffle is equipped as a standard feature to effectively reduce the exhaust volume, and two types of volume can be selected. ・The built-in catalyzer provides the same environmental performance as stock. ・The exhaust pipes are 76mm in diameter, and the bends are welded in a circular pattern for beautiful welded marks.The joint part and the straight part are made of machined stainless steel, and the slit is engraved with a high quality finish. ・The billet type anodized silencer bracket by machined solid aluminum is used.The WirusWin logo is also engraved. ・Plate type spring hook with high strength and beautiful finish is adopted. ・The tapered cone on the tail end is made of FRP with a 4-dimensional heat-resistant mud black structure, which is a first for WirusWin. ・A special logo plate proves the collaboration between Custom Scooter magazine and WirusWin.
4 types of silencer is available; [Silver Carbon Specification], [Black Carbon Specification], [Titanium Specification], [Stainless steel Specification]. Each silencer has a strong impact and is made to a very high degree of perfection.You can choose according to your custom image and preference. Except for the silencer main pipe, stainless steel is used for its high durability and corrosion resistance.
The volume and sound quality are also carefully selected to produce a crisp sound.The volume is set quietly, so you can run without disturbing your neighbors. In terms of performance, WirusWin has also achieved a smooth ride with no drop in low to mid speed.
It is relatively easy to install as you only need to fix the bracket with two points, fix the silencer with the band and fix the exhaust pipe to the engine side. There is an O2 sensor (exhaust gas concentration sensor) mounting hole on the exhaust pipe so that the stock O2 sensor can be installed. It is made to be compatible with lowered vehicles.Please note that there is a possibility of interfering with the body due to the extreme amount of lowering, hardness of the shock, driving conditions and wide cowl installation. If the parts interfere with each other, please set the rear shocks to the hardest setting when driving.
Caution
*Compatible with 2012 and onwards Taiwanese vehicles with VIN SE465. *The image shows the 2007 and later models of the current Japanese models and the 5th and 6th models of the Taiwanese models.Please note that the specifications of the details are different.
