- Home
- Model
- HONDA 751 - 1000cc
- CB900F
- Motorcycle Parts
- Suspensions / Rearsets / Wheels / Swingarms
- Suspensions
- Preload Adjusters
- METAL GEAR WORKS
- METAL GEAR WORKS: Front Fork Preload Adjuster
Front Fork Preload Adjuster
- Product number: 01-0101-020002
-
- IN STOCK
- Out Stock
- METAL GEAR WORKS
- |
- 0.0
- (0 review)
Check my coupons
Product Detail
Specification:
Color: Silver
Compatible with 39Φ Fork
Preload Adjustment Range: Approx. 30mm
Instruction manual included
Compatible with 39Φ Fork
Preload Adjustment Range: Approx. 30mm
Instruction manual included
[Description]
By installing the front fork preload adjuster, it is possible to adjust the preload of the front fork.
Preload adjustment range is approx. 30mm.
Due to the internal structure, the adjuster does not stick out from the top of the cap even when the preload is not applied, resulting in a neat and tidy appearance.
It is also possible to avoid the interference between the adjuster and the handlebar in the case of a vehicle that has been customized with a pipe handlebar.
Comes with an instruction manual.
Preload adjustment range is approx. 30mm.
Due to the internal structure, the adjuster does not stick out from the top of the cap even when the preload is not applied, resulting in a neat and tidy appearance.
It is also possible to avoid the interference between the adjuster and the handlebar in the case of a vehicle that has been customized with a pipe handlebar.
Comes with an instruction manual.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*The image may contain other types.
*Not available for CB1100F, CB1100RC and CB1100RD.(Because the screw diameter of the fork top cap is different.)
*Many vehicles that have been used for many years have fork spring free length shorter than the specified value.It is recommended that the fork springs be replaced along with the front fork pre-load adjusters.(Stock springs are no longer available, so please consider using aftermarket springs.)
*Not available for CB1100F, CB1100RC and CB1100RD.(Because the screw diameter of the fork top cap is different.)
*Many vehicles that have been used for many years have fork spring free length shorter than the specified value.It is recommended that the fork springs be replaced along with the front fork pre-load adjusters.(Stock springs are no longer available, so please consider using aftermarket springs.)
Applicable Models
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/