Check my coupons
Product Detail
Specification:
Movement width: Upward approx. 30mm, Front approx. 20mm
DURACON bar ends included
DURACON bar ends included
[Description]
・This is a conversion KIT to convert a stock handlebar to an aluminum handlebar.
・The handlebars are BEET handlebars made for road use.The weight reduction can be expected by the difference of the material.
・The position of the handlebar is moved upward by about 30mm, and the overall width is narrowed by approx. 25mm at both ends.Includes Duracon® bar ends (black).
・The difference in the aperture angle moves the handlebar end forward by approx. 20mm, changing the position to a relatively comfortable one.
・When using a vibration prevention weight, a weight with an outer diameter of 22mm is recommended.
・The handlebars are BEET handlebars made for road use.The weight reduction can be expected by the difference of the material.
・The position of the handlebar is moved upward by about 30mm, and the overall width is narrowed by approx. 25mm at both ends.Includes Duracon® bar ends (black).
・The difference in the aperture angle moves the handlebar end forward by approx. 20mm, changing the position to a relatively comfortable one.
・When using a vibration prevention weight, a weight with an outer diameter of 22mm is recommended.
Note
Caution
*DURACON® is a registered trademark of Polyplastics Corporation in Japan and other countries.
*It is recommended to change the routing of the brake hose.
*There may be changes in product specifications due to the manufacturer's reasons.
*It is recommended to change the routing of the brake hose.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
