- Home
- Motorcycle Parts
- Electrical
- Meters
- Tachometers
- Neofactory
- Neofactory: 48mm Cable Adjustable Tachometer
48mm Cable Adjustable Tachometer
- Product number: 010884
-
- IN STOCK
- Out Stock
- Neofactory
- |
- 0.0
- (0 review)
Check my coupons
Product Detail
Specification:
[Color]
Body: Polished Stainless Steel
Dial: White
Needle: orange
Back LED: White
[Material]
Body: Stainless steel
Bracket: Stainless steel
[Size]
Main unit: Diameter 48mm (trim part 53mm) X depth 52mm
Bracket Mounting Hole Diameter: Approx. 10 mm
Offset:Approx. 50mm (from the center of the main unit to the center of the mounting hole)
[Product Description]
・Meter body x 1
・Bracket x 1
・Setup manual x 1copy
Manufacturer's Part Number: 010884
Body: Polished Stainless Steel
Dial: White
Needle: orange
Back LED: White
[Material]
Body: Stainless steel
Bracket: Stainless steel
[Size]
Main unit: Diameter 48mm (trim part 53mm) X depth 52mm
Bracket Mounting Hole Diameter: Approx. 10 mm
Offset:Approx. 50mm (from the center of the main unit to the center of the mounting hole)
[Product Description]
・Meter body x 1
・Bracket x 1
・Setup manual x 1copy
Manufacturer's Part Number: 010884
[Description]
It is a small type tachometer of 48mm.
This product can be installed to both simultaneous ignition and independent ignition because you can choose Hz.
When the light is emitted, it has a fantastic white light and looks perfect.
When the tank is changed, the meter needs to be relocated.and the meter is too big and uncool.This is effective in such cases.
If you have the knowledge, you can install it even if you don't have it.
Adjustable tachometer manual
This product can be installed to both simultaneous ignition and independent ignition because you can choose Hz.
When the light is emitted, it has a fantastic white light and looks perfect.
When the tank is changed, the meter needs to be relocated.and the meter is too big and uncool.This is effective in such cases.
If you have the knowledge, you can install it even if you don't have it.
Adjustable tachometer manual
Caution
*This cannot be used for point ignition.
*Please make sure to set the mode when you use it.
*Wiring should be done to get ignition signal directly in case of independent ignition.
*Please make sure to set the mode when you use it.
*Wiring should be done to get ignition signal directly in case of independent ignition.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/