Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
XLH883 SPORTSTER
SPORTSTER 1200CUSTOM
SPORTSTER 1200CUSTOM
Show more
Product Detail
Specification:
Main unit: Made of FRP
[Description]
The rear fenders are full of classic taste with the shape that covers the tires deeply and the graceful initial line.
It gives a classic look to the Sportster, and at the same time, gives it a dignified and high-quality presence.
The mat guard is molded in one piece, and the part that can be seen through the gap of the frame is also well made.
It is designed to be able to transfer the stock taillight, and it is coupler-on design without wiring processing.
The fender body is strong enough for pillion riding.
A small accessory compartment is set in the upper part of the fender, and ECM can be stored in the model with ECM set in the upper part of the fender (06--09) , and ETC can be stored in the other model years.
The body is made of FRP, black gel coat finish and can be painted with stock color.
It is designed to be attached to the vehicle via an aluminum collar to prevent damage from overtorque and vibration.
・The holes have been drilled to relocate the stock taillights and license plate.
・This product is designed to use the stock taillight for better visibility and durability.
・ECM can be stored in the upper part of the fender for the models with ECM, and ETC can be stored in the lower part of the fender for any models without ECM.
・Woven with roving cloth to ensure sufficient strength.
It is also suitable for pillion riding.
・A small accessory box is set in the upper part of the fender which is hidden by the seat.
・ECM can be stored in the upper part of the fender for the models with ECM, and ETC can be stored in the lower part of the fender for any models without ECM.
It gives a classic look to the Sportster, and at the same time, gives it a dignified and high-quality presence.
The mat guard is molded in one piece, and the part that can be seen through the gap of the frame is also well made.
It is designed to be able to transfer the stock taillight, and it is coupler-on design without wiring processing.
The fender body is strong enough for pillion riding.
A small accessory compartment is set in the upper part of the fender, and ECM can be stored in the model with ECM set in the upper part of the fender (06--09) , and ETC can be stored in the other model years.
The body is made of FRP, black gel coat finish and can be painted with stock color.
It is designed to be attached to the vehicle via an aluminum collar to prevent damage from overtorque and vibration.
・The holes have been drilled to relocate the stock taillights and license plate.
・This product is designed to use the stock taillight for better visibility and durability.
・ECM can be stored in the upper part of the fender for the models with ECM, and ETC can be stored in the lower part of the fender for any models without ECM.
・Woven with roving cloth to ensure sufficient strength.
It is also suitable for pillion riding.
・A small accessory box is set in the upper part of the fender which is hidden by the seat.
・ECM can be stored in the upper part of the fender for the models with ECM, and ETC can be stored in the lower part of the fender for any models without ECM.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*Installation of this product on models with the brake lamp integrated into the indicator light (XL1200N, XL883N from 2010, XL1200X and XL1200V from 2011) requires modification of the harness.
*The stock tail lamp is used, so it fits to XL883L (Low) before '10 with short rear suspension.
*Not tested for XL1200C (11-), XL1200CA (13), XL1200CB (13).
*This product cannot be installed with Sissy Bar Side Plate (53925-04), which is a stock option.
*Depending on the length of the rear suspension, it may interfere with the tires.
*Some of the products have parting lines (joints between molds) due to the molding process using split molds.It occurs at the joint of the mold and the mold, and there is no problem in the strength of the product.Please use it after painting or buffing if you are concerned about it.
*The stock tail lamp is used, so it fits to XL883L (Low) before '10 with short rear suspension.
*Not tested for XL1200C (11-), XL1200CA (13), XL1200CB (13).
*This product cannot be installed with Sissy Bar Side Plate (53925-04), which is a stock option.
*Depending on the length of the rear suspension, it may interfere with the tires.
*Some of the products have parting lines (joints between molds) due to the molding process using split molds.It occurs at the joint of the mold and the mold, and there is no problem in the strength of the product.Please use it after painting or buffing if you are concerned about it.
Applicable Models
XLH883 SPORTSTER
SPORTSTER 1200CUSTOM
SPORTSTER 1200CUSTOM
Show more
